EverFocus ED640 User Manual

Page 1
Indoor DWDR 3-Axis Varifocal
700TVL IR Dome Camera
Operation Instructions
Model No.
ED640
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein. Improper disassembly or introduction of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal circuits, as well as creating unbalanced illumination beyond the capability of the camera to compensate.
4. Keep the power cord away from water and other liquids and never touch the power cord
with wet hands. Touching a wet power cord with your hands or touching the power cord with
wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings. This camera is suitable for indoor operation only. Use the camera at temperatures within
-10° ~ +50° (14~122) and humidity between 30% and 90%. The input power source is 12VDC. Regulated power supply required.
Page 2
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera plus any wind, snow, ice or other loading, and securely attach the camera to the mounting surface using screws and anchors which will properly support the camera. If necessary (e.g. when mounting to drop ceilings) use a safety wire to provide additional support for the camera.
Table of Contents
Product Overview ………………………………………………………………… 2 Main Features ……………………………………………………………………... 2 Box Contents ……………………………………………………………………….. 2
Specifications…………………………………………………………………….... 3
Dimensions ………………………………………………………………………... 4 Installation ………………………………………………………………………… 5 OSD Menu Controls and Test Point ……………………………………………….. 5 Lens Adjustment…………………………………………….………………………. 5
Menu Setting ………………………………………………………………………..... 6
Product Overview
Get superior performance and high resolution images in bright light or no light. The EverFocus ED640 uses a Sony Super HAD II Color CCD to produce high quality color images with a minimum of 630 horizontal TV lines of resolution. Combine this with digital day/night, a native low light sensitivity of 0.01 lux, and 24 IR LEDs with a range of 82 feet (
depending on scene IR reflectivity
camera that fits a wide variety of indoor applications. The ED640 comes with a 2.8~12mm VF AI lens that covers a field of view up to 82° wide, or can magnify images for increased detail. With low 12VDC current draw, this is the camera that you have been waiting for to create analog CCTV systems that deliver superior image clarity in a wide range of indoor applications at virtually any light level.
), a 3-axis wall or ceiling mount indoor plastic housing and you have a cost effective
Features
1/3” Sony Super HAD II Color CCD with high resolution of 700TVL for high image clarity
Full OSD with features like DWDR, HLC/BLC, DNR, Anti-Color-Roll and more
2.8~12mm VF AI lens covers from wide angle of 82° to moderate telephoto field of view
3-Axis camera mount for flexible mounting and positioning
24 smart IR LEDs with range of 82 feet for long distance coverage
Smart LEDs avoid over exposure of close in objects
Digital Day/Night for color in bright light, IR illuminated B/W in low light
DC12V only 320mA draw
Box Contents
Camera User Guide Mounting Screw (3) Power adaptor pigtail Housing Opener Mounting template Video Test Point Cable
2
Page 3
Specifications
TV System NTSC
Image Sensor 1/3” Sony Super HAD II Color CCD
Effective Pixels 768Hx494V
Resolution 700 TV Lines
Lens 2.8~12mm VF AI
Scanning System 525Lines, 2:1Interlace
Scanning Frequency 15.734KHz(H),59.94Hz
Auto Shutter Speed 1/60 to 1/100,000sec.
Sync. System Internal
S/N Raito More than 52dB (AGC off)
OSD 5 Button Navigation. Multiple options
OSD Language
Day & Night
Min. Illumination 0.01 lux nominal; 0 lux with IR LEDs on
IR LEDs 24 smart LEDs, 850nm
IR Range 82 feet
Smart IR Control Off/On with programmable area of interest and gain
Auto Gain Control Off, Low, Middle, High
DWDR Off/On with adjustable weight
BLC/HLC
Gamma Correction
DNR 2D DNR Off/On
Lens Shading Compensation
Mirror Off/On
Digital Day/Night with programmable switch levels and delays
BLC
HLC Off/Night Only/Always with adjustable level
0.45; Display compensation option for CRT or LCD with
English, Spanish, French, Portuguese,
German, Polish, Japanese, Chinese
Auto/Color Black & White;
(depends on scene IR reflectivity)
Off/On for two areas with programmable
area of interest and gain
adjustable levels
Off/On, adjustable for level and image center
Negative Image Off/On
White Balance AWB ( 2,100˚k ~ 9,100˚k)
Digital Pixel Correction Manual operation; programmable threshold and area
3
Page 4
Motion Detection On screen indication; up to 4 programmable areas
Privacy Zones Up to 8areas programmable for location and color
Video Output NTSC CVBS, 1Vp-p, 75
Power Supply DC 12V±10%
Power Consumption 160mA Nominal / 320mA IR ON
Operating Temperature
14ºF ~ 122ºF ; -10°C~50°C
Storage Temperature -4ºF ~ 140ºF ; -20°C~60°C
Operating Humidity to 90% RH max.
Dimension 4.41”/112mm diameter, 3.43”/87mm high
Weight 7.2oz/205g
Certifications CE/FCC
Dimensions
Mounting holes
1.77” radius 3 places
4
Page 5
Installation
1 2. 3. 4.
Warning: To prevent electrical shock, turn off the electrical power before making electrical
connections. OBSERVE POLARITY when connecting 12VDC power to the camera.
1. Select mounting location. Open cover using tool provided.
2. Place template and drill holes (5/8” minimum for wires, ~¼” for hollow wall anchors; ~3/32” pilot
hole for screws alone). Insert wall anchors if used.
3. Mount camera to ceiling with 3 screws and adjust camera direction.
4. Replace dome cover on base (snaps on).
OSD Menu Controls and Video Test Point
Press the Menu/Enter button to bring up the OSD menu. Navigate the menu with the direction keys. Select RETURN to move back to the previous level menu. When exiting the main menu, choose SAVE, NOT SAVE or RESET (factory defaults) as desired.
Use adapter cable supplied to connect test monitor to video test point.
Lens Adjustment
Use fingers or screwdriver to adjust field of view (zoom) and focus.
5
Page 6
Menu Setting (Default values shown in parentheses).
(Rev. 1.1)
MENU SUB MENU AND FACTORY SETTING PARAMETERS
BRIGHTNESS 0 ~ 255 (50)
IRIS SPEED 0 ~ 15 (5)
LENS (DC)
DC
MANUAL BRIGHTNESS 0 ~ 255 (50)
EXPOSURE
WHITE BAL (ATW1)
BACKLIGHT (OFF)
DAYNIGHT (AUTO)
SHUTTER
AGC OFF, LOW, MIDDLE, HIGH (MIDDLE) DWDR (OFF) LEVEL 0 ~63 (32)
ATW1
ATW2
AWCSET
ANTI.CRL
MANUAL
(OFF)
BLC
HLC
AUTO
COLOR
B/W
AUTO, 1/60(50), FLK, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/5000, 1/10000, 1/100000 (1/60)
COLOR TEMP MANUAL, INDOOR, OUTDOOR BLUE (MANUAL) 0 ~ 255 (65) RED (MANUAL) 0 ~ 255 (26)
AREA SEL. AREA1, AREA2
AREA STATE ON, OFF
GAIN 0 ~ 255 (128)
HEIGHT 0 ~ 10 (005)
WIDTH 0 ~ 10 (005)
LEFT/RIGHT 0 ~ 15 (005)
TOP/BOTTOM 0 ~ 15 (005)
D=>N LEVEL 0 ~ 255 (177)
MODE
MASK SKIP OFF, ON (OFF) D=>N LEVEL 160~255 (192) D--N DELAY 1 ~ 30 (1) SEC
N=> D LEVEL 0 ~ 64 (032) N--D DELAY 0 ~ 30 (5) SEC
BURST ON,OFF (OFF)
IR SMART
NIGHT ONLY, ALL DAY (NIGHT ONLY)
ON, OFF (ON) IR GAIN 0 ~ 255 (122) HEIGHT 0 ~ 015 (006) WIDTH 0 ~ 015 (010)
LEFT/RIGHT 0 ~ 015 (002)
TOP/DOWN 0 ~ 015 (007)
IR LEVEL HIGH, LOW (HIGH)
6
Page 7
MENU SUB MENU AND DEFAULT SETTING
DAYNIGHT (AUTO)
DPC
SPECIAL
EXT
START (Cover the lens then press enter key)  Process now
DPC VIEW OFF, ON (OFF)
LS VALUE 0 ~ 63 (015)
DIFF. 0 ~ 63 (010)
AREA HS 0 ~ 255 (021)
AREA HE 0 ~ 255 (255)
AREA VS 0 ~ 255 (008)
AREA VE 0 ~ 255 (118)
CAM TITLE OFF, ON (ON)
MOTION (OFF)
D=>N DELAY 0 ~ 30 (1)
N=>D DELAY 0 ~ 30 (1)
AREA 1~4 (AREA1) AREA STATE ON,OFF (OFF)
HEIGHT 0~15 (4) WIDTH 0~15 (4) LEFT/RIGHT 0~15 (3) TOP/BOTTOM 0~15 (2) DEGREE 0~255 (32) VIEW ON,OFF (ON) AREA 1~8 (1)
SPECIAL
PRIVACY (OFF)
PRIVACY
IMAGE ADJ.
SHARPNESS 0 ~ 31 (016)
AREA STATE ON,OFF (ON)
HEIGHT 0 ~ 125 (032) WIDTH 0 ~ 215 (032) LEFT/RIGHT 0 ~ 220 (032) TOP/BOTTOM 0 ~ 105 (016) COLOR 0~15 (014)
LEVEL 0~255 (157)
LENS SHAD. (OFF)
2DNR ON, OFF (ON) MIRROR ON, OFF (OFF)
FONT COLOR
CONTRAST 0 ~ 255 (137)
H-CENTER 0~255 (074) V-CENTER 0~255 (053)
FONT 0 ~ 15 (003) ID & TITLE 0 ~ 15 (003)
7
Page 8
SPECIAL
MENU SUB MENU AND DEFAULT SETTING
IMAGE ADJ.
PED LEVEL 0~63
CRT
DISPLAY
LCD
DISPLAY USER
NEG.IMAGE ON, OFF (OFF)
COLOR GAIN GAMMA 0.3~1.0
PED LEVEL 0~63
COLOR GAIN GAMMA 0.3~1.0
PED LEVEL 0~63
COLOR GAIN
(028) 0~255 (192)
(0.55)
(028) 0~255 (192)
(0.45)
(028) 0~255 (176)
LANGUAGE (ENGLISH)
VERSION 00 00 00
EXIT SAVE, NOT SAVE, RESET
*Depending on setting of sub menu, the default value may be changed.
ENGLISH,CHINESE1, ESPANOL, POLISH, DEUTSCH, PORTU FRANCAIS,JAPANESE
8
Page 9
EverFocus Electronics Corp.
Your EverFocus product is designed and
Ih
r EverFocus Produkt wurde entwickelt und
Corporate Headquarters:
12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw
marketing@everfocus.com.tw
China Office:
Room 609, Technology Trade Building, Shangdi Information Industry Base, Haidian District, Beijing, China 100085 TEL: +86-10-62973336~39 FAX: +86-10-62971423 www.everfocus.com.cn
marketing@everfocus.com.cn
U.S.A - California Office:
1801 Highland Avenue Units A & B Duarte, CA 91010 TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com
sales@everfocus.com
Europe - Germany Office:
Albert-Einstein-Strasse 1, D-46446 Emmerich, Germany TEL: +49-2822-93940 FAX: +49-2822-939495 www.everfocus.de
info@everfocus.de
India Office:
Suite 803, Housefin Bhavan, C-21, Bandra Kurla Complex, Bandra (East), Mumbai 400051. India. TEL: +91-222-444-8791 FAX: +91-222-444-8790
www.everfocus.in
U.S.A - New York Office:
415 Oser Avenue Unit S Happauge, NY 11788 TEL: +1-631-436-5070 FAX: +1-631-436-5027 www.everfocus.com
sales@everfocus.com
Japan Office:
5F Kinshicho city Building, 2-13-4 Koto-Bashi, Sumida-Ku, Tokyo, 130-0022 Japan TEL: +81-3-5625-8188 FAX: +81-3-5625-8189 www.everfocus.co.jp
info@everfocus.co.jp
UK Office:
Unit 12 Spitfire Business Park Hawker Road Croydon, CR0 4WD London: 0845 430 9999 Telford: 0845 430 8888 Fax:
020 8649 9907
uk.support@EverFocus.com
manufactured wi th high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please, dispose o f this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic product. Please, help us to conserve the environment we live in!
hergestellt mit qualitativ hochwertigen Materialien und Komponenten, die recycelt und wieder verwendet werden können.
Dieses Symbol bedeutet, dass elektrische und elektronische Geräte am Ende ihrer Nutzungsdauer vom Hausmüll getrennt entsorgt werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer örtlichen kommunalen Sammelstelle oder im Recycling
9
Loading...