EverFocus ED635 User Manual

EVERFOCUS

Indoor Color 3-Axis 630TVL

IR Dome Camera

Operation Instructions

Model No.

ED635

Please read this manual first for correct installation and operation. This manual should be
retained for future reference. The information in this manual was current when published.
The manufacturer reserves the right to revise and improve its products. All specifications are
therefore subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and
audio speakers since the electromagnetic fields generated from these devices may distort the
video image or otherwise interfere with camera operation.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introduction of

corrosive materials may result in equipment failure or other damage.

3. Try to avoid facing the camera toward the sun.

In some circumstances, direct sunlight may cause permanent damage to the sensor and/or
internal circuits, as well as creating unbalanced illumination beyond the capability of the camera
to compensate.

4. Keep the power cord away from water and other liquids and never touch the power cord

with wet hands. Touching a wet power cord with your hands or touching the power cord with

wet hands may result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents.

Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning

For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the
hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the
camera lens. Use a damp soft cloth to remove any dirt from the camera body. Please do not use
complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.

7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings. This camera is suitable for indoor operation only. Use the camera at temperatures within

-10° ~ +50° (14℉~122℉) and humidity between 30% and 80%. The input power source is
12VDC. Regulated power supply required.

8. Mounting

Use care in selecting a solid mounting surface which will support the weight of the camera plus
any wind, snow, ice or other loading, and securely attach the camera to the mounting surface
using screws and anchors which will properly support the camera. If necessary (e.g. when
mounting to drop ceilings) use a safety wire to provide additional support for the camera.

Table of Contents

Product Overview ………………………………………………………………… 1
Main Features ……………………………………………………………………... 1
Box Contents ……………………………………………………………………….. 1

Specifications…………………………………………………………………….... 2

Dimensions ………………………………………………………………………... 3
Installation ………………………………………………………………………… 3

Product Overview

Get superior performance and high resolution images in bright light or no light. The EverFocus ED635 uses a Sony
Super HAD II Color CCD to produce high quality color images with a minimum of 630 horizontal TV lines of resolution.
Combine this with digital day/night, a native low light sensitivity of 0.01 lux, and 24 IR LEDs with a range of 82 feet
(

depending on scene IR reflectivity

camera that fits a wide variety of indoor applications. The ED635 comes with a 3.6mm that covers a field of view 67°
wide. With low 12VDC current draw, this is the camera that you have been waiting for to create analog CCTV systems
that deliver superior image clarity in a wide range of indoor applications at virtually any light level.

), a 3-axis wall or ceiling mount indoor plastic housing and you have a cost effective

Features

 High resolution of 630TVL
 1/3” Sony Super HAD II Color CCD
 24 IR LEDs with range of 82 feet
 Digital Day/Night
 3-Axis camera mount
 3.6mm fixed lens
 DC12V

Box Contents

Camera
User Guide
Mounting Screw (3)
Power adaptor pigtail
Housing Opener
Mounting template

1