EverFocus ED300 Series User's Manual And Operation Instructions

ED300 Series

User’s Manual

and

Operation Instructions

Version 1.0

Table of Contents

Notice ............................................................................................. 1

Safety W arning............................................................................... 2

Introduction.................................................................................... 3

Specification...................................................................................4

Major Parts Names and Functions ..........................................5

Installation Instructions............................................................

7

Adjustments................................................................................ 8

Lens Adjustments ...................................................................... 9

1

Notice

This manual is presented to the users of ED300 by EverFocus Electronics Corp.
With years of engineering researches, EverFocus has spared all efforts to provide
the high quality products to the worldwide users. For the policy of continual
product improvement, EverFocus reserves the right to make changes to the
product specifications and documentation without notice. All the components
of the products, including accessories, components, and outlook, are based on
the agreements of each deals to satisfy all kinds of users. Please be advised that
every step of operation must follo w th e instruction of this manual to keep ED300
working under the best condition. Please notice that EverFocus will not be
charged any claims or renewing cases resulted from inappropriate operation.

2

1. Do not expose the camera to humidity and dust.

Moisture can damage the camera and cause the danger of electric
shock. If the camera is mounted outdoors, a camera housing is
required. Do not install the camera at where there is greasy
smoke or steam, where the humidity is too high, or where there is a
lot of dust to prevent damages to the camera.

2.

Do not disassemble the camera.

Do not disassemble the camera body as it is dangerous and may
cause the damages to the camera. Refer all servicing to qualified
service personnel.

3.

Handle the camera with care.

Be careful when handling the camera, do not drop it or subject it
too strong shock or vibration to prevent any damages to it.

4.

Do not install the camera near electric or magnetic fields.

Installed the camera away from TV, radio transmitter, magnet,
electric motor, transformer, audio speakers because the magnetic
fields generate from above devices will distort the video image.

Safety Warning