EverFocus 630 TVL User Manual

D-WDR/3D DNR IR DOME CAMERA

630 TVL
D-WDR / 3D DNR

IR DOME CAMERA

USER’S MANUAL

■

■

1/3” IT CCD
High Resolution 630TV Lines

■

■

■

■

■

■

■

■

■

■

D-WDR(Wide Dynamic Range)

3D DNR(Digital Noise Reduction)

LSC(Lens Shading Compensation)

Sens-Up Function(x1024)

Back Light Compensation

Day & Night (ICR-Optional)
Intelligebt Motion Detection

PELCO-D / RS485(Option)

Privacy Mask(Polygonal,8 Colors)
O.S.D menu function

The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

This installation should be made by a qualified service person
and should conform to all local codes.

INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.

WARNING - Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

Precaution

Do not install the camera in
extreme temperature conditions.

To avoid malfunctions, never
use the camera close to a gas

or oil leak

Do not Keep the camera face to
strong light directly

Do not disassemble the camera
even if troubles happened

Do not drop the camera or
subject them to physical shocks.

Do not install the camera under
unstable lighting conditions

Do not install or use the camera
in an environment where the

humidity is high

Do not expose the camera to
rain or spill beverage on it.

1. Features

D-WDR(Wide Dynamic Range)

Delivers a powerful Wide Dynamic Range to the camera which provides superior
images, internally and externally, even under extreme light and dark contracts.
It automatically compensates the necessary light levels to get detailed information
in the dark part of the image without saturation from the bright part. It enables the
WDR function to be very efficient, using a normal CCD, by using a Dual Shutter
(long & short shutter) algorithm, a specialised AE (Auto Exposure) and intelligent
image processing.

630 TVL ULTRA HIGH RESOLUTION

The horizontal resolution is 630 TV Lines in Color mode and 700 TV Lines in Black/
White mode using a high density CCD. It gives a vivid image output with super
high horizontal resolution using our own De-Mosaic Interpolation algorithm and a
specialised built-in sharpness filter.

3D DNR(Digital Noise Reduction)

Achieves excellent 3D-DNR (3-Dimensional Digital Noise Reduction) function
using upgraded 3D filtering. This function is automatically enabled when the
camera is being used and provides clear and superior images in very low light
luminance. Normally video noise increases in low light conditions, while the gain
level of the amplifier increases. It compensates for the dynamic noise using the
inactive information of a normal frame

Smart IR Function

LSC ( Lens Shading Compensation)

Sens-Up(x1024)

Achieves high quality pictures by supporting a long exposure time - more than
1/50second - and enables recognition of the shape and color of a suspended
object under no light conditions

POLYGONAL PRIVACY MASKING(Polygonal, 8colors)

Ensures privacy protection for private and specific areas on the video signal
output using a polygonal masking function. It allows the size and position of the
masking areas to be controlled very easily, and there are 8 mask areas which are
user programmable - color, brightness and mosaic.

HLC

Enables the recognition of a visible car license plate by blocking unwanted light
sources.

HIGH SENSITIVITY TRUE DAY&NIGHT

The Day & Night function delivers high quality color rendition and converts
automatically into monochrome as luminance levels drop.

2. Components

IR LED Plastic Dome Camera

SCREW

SERVICE VIDEO

MANUAL

Option

RS-485
Terminal Block

DOME COVER OPENER

WDR / 3D DNR
IR DOME CAMERA

USER’S MANUAL

WDR/3D DNR IB DOME CAMERA

WDR/3D DNR
Zero Defect
High Resolution of 600 TV Lines
Sens Up(x512, DSS)
DIS(Digital Image Stabilization)
Polygonal Privacy Masking
D.Zoom(x1~x10)
Eclipse
High Sensitivity Day&Night

SCREW

MANUAL

DOME COVER OPENER

WDR / 3D DNR
IR DOME CAMERA

USER’S MANUAL

WDR/3D DNR IB DOME CAMERA

WDR/3D DNR
Zero Defect
High Resolution of 600 TV Lines
Sens Up(x512, DSS)
DIS(Digital Image Stabilization)
Polygonal Privacy Masking
D.Zoom(x1~x10)
Eclipse
High Sensitivity Day&Night

3. Names and Functions of Parts

②

②

①

①

⑥

144(DIMESION:

Ø

) X 103(H)mm

112(DIMESION:

Ø

) X 87(H)mm

IR LED Plastic Dome Camera

① Base
② Dome Cover Ring
③ Dome Cover
④ Focus Handle

Used to provide for accurate of an object within the

lens field of view
⑤ Zoom Handle

Used to adjustzoom magnification by turning

⑥ IR LEDs
⑦ OSD Board

Used to connect it with external viewer as follows.

UP

DOWN

RIGHT

LEFT

ENTER

Service Video

Service Video

UP

DOWN

RIGHT

LEFT

ENTER

DOWN

RIGHT

LEFT

ENTER

UP

4. Installation & Connection

Note :
* Rubber pad(gasket) should be sticked to above base in installation
place.
* Wall mounting backet and other instruments should be used
with dome camera if the installation condition is not appropriate
to cover the whole dome base.

Wall Wall

IR LED Plastic Dome Camera

DVR

Monitor

Monitor

Power
(Adaptor Plug)

Adaptor

Adaptor

Video Cable

Video Cable

RS485 +

(Option)

RS485 -

AC24V + (RED)

AC24V - (BLACK)

DC Power Connecting

AC Power Connecting

DVR

RS485 +

(Option)

RS485 -

PORT2

TX

+_+_+_+

_

RX TX RX

PORT1

PORT2

TX

+_+_+_+

_

RX TX RX

PORT1

5. Setup Menu Flow

EXPOSURE LENS DC, MANUAL
AGC OFF,LOW,MID,HIGH
SENSE-UP AUTO, OFF, X2, X4, X8, X16, X32, X64,
X128, X256, X512, X1024
BACK LIGHT OFF
BLC - BLC LEVEL<OFF, LOW, MID, HIGH>
HLC
D-WDR-SET LEVEL<0~20>
3D-DNR OFF, LOW, MID, HIGH, AUTO
RETURN

WHITE BALANCE WB MODE ATW, MANUAL, PUSH
R-Y GAIN
B-Y GAIN
RETURN

DAY&NIGHT D&N MODE AUTO, COLOR, BW, EXT, EXT2
BURST ON, OFF
C_SUP <0 ~ 100>
S_SUP <0 ~ 100>
SMART IR ON, OFF
RETURN

IMAGE ADJUST MIRROR OFF, MIRROR
SHARPNESS <0~30>
GAMMA 0.45, 0.5, 0.6, USER<0.2 ~ 1.0>
MONITOR CRT, LCD
LSC OFF, ON <0 ~ 30>
RETURN

MOTION

MOTION OFF, ON
AREA AREA1 ~ AREA4
SENSITIVITY <1 ~ 30>
DISPLAY OFF, MESSAGE, TRACE
HOLD TIME <0~15>

ALARM OUTPUT

OFF, ON

RETURN

PRIVACY MASK1 OFF
ON
DOT SEL
DOT XY
MOVE XY
COLOR SET<1~8>
MASK8 OFF
ON
DOT SEL
DOT XY
MOVE XY
COLOR SET<1~8>
RETURN

SPECIAL LANGUAGE 8 Language
TITLE

COMMUNICATION

OFF
ON
ID<0 ~ 255>
BAUD RATE<2400, 4800, 9600>
PROTOCOL<PELCO-D>
DPC OFF, AUTO

FACTORY SET

NO, YES

RETURN

EXIT SAVE&EXIT
EXIT
RETURN

6. Special Features

1. D-WDR(Wide Dynamic Range)

D-WDR captures the images at all light levels by correcting GAMMA CURVE.
If you use an ordinary camera in a scene with an intensive backlight,
the object will be displayed dark on the monitor affected by the backlight.
To solve this problem, you can use the D-WDR function to improve the dark
part without saturation from bright part.
You can adjust SET LEVEL to get clearer images.

2. HLC

This function is to mask the bright color.
You can select 4 mask areas and DAY&NIGHT and adjust HLC level.

EXPOSURE

LENS DC
AGC MID
SENS-UP AUTO

BACK LIGHT D-WDR

3D-DNR AUTO
RETURN

D-WDR

SET LEVEL 003

RETURN

EXPOSURE

LENS DC
AGC MID
SENS-UP AUTO

BACK LIGHT HLC

3D-DNR AUTO
RETURN

HLC

HBLC MANUAL

MODE ALL DAY
HLC LEVEL 003
MASK1 ON
MASK2 ON
MASK3 ON
MASK4 ON

RETURN

4. SMART MOTION

With learning capability, it memorizes the previous screen on the
movement of the subject approximately in 3 to 5 seconds. When
there is a change, the alarm function goes off.

3. 3D DNR(Digital Noise Reduction)

Select 3D DNR ON or OFF.
3D-DNR function reduce the background noise in a low luminance
environment. Upgraded 3D filtering ensures even more clear image.

[DNR Level High : Picture image is more clear but Ghost is more increased.
DNR Level Low : Picture image is not clear but less Ghost.]

MAIN MENU

EXPOSURE

WHITE BALANCE

DAY & NIGHT

MOTION

IMAGE ADJUST

PRIVACY
SPECIAL
EXIT

MAIN MENU

EXPOSURE

WHITE BALANCE

DAY & NIGHT

MOTION

IMAGE ADJUST

PRIVACY
SPECIAL
EXIT

MOTION

MOTION

AREA

SENSITIVITY

HOLD TIME

DISPLAY

ALARM OUTPUT
RETURN

ON

003

007
TRACE

OFF

EXPOSURE

LENS DC
AGC MID
SENS-UP AUTO
BACK LIGHT D-WDR

3D-DNR AUTO

RETURN

7. SPECIFICATIONS

Design and specifications are subject to change without notice.

-20℃ ~60℃ /30% ~80%

-30

℃

~60℃ /20% ~90%

Only DC12V (±20%) Dual AC 24 / DC 12V

500mA
6W

550mA
7W

250mA /
6W /

Operating Temperature/Humidity
Storage Temperature/Humidity

IR LEDs

30 units

Night View Distance(Outdoor)

40 units

30 m 25 m

30 units 24 units

25 m 25 m

LENS

Aspherical 2.8~12mm DC Auto Iris Lens

Aspherical 2.8~12mm DC Auto Iris Lens/
4mm(Option 6mm)

Aspherical 3.5~16mm DC Auto Iris Lens

LENS(Option)

Supply Voltage
Current
Power Consumption

[Recommended - Voltage : +/-20%, Current :
Adapter with rated power of 2 times(than real using current ]

NTSC PAL

1/3” IT CCD

768(H) X 494(V) 752(H) X 582(V)

811(H) X 508(V) 795(H) X 596(V)

H/V 15.734/59.94Hz H/V 15.625/50Hz
2:1 Interlace

630 TV Lines (Max.)

0.12Lux(15IRE), 0.2Lux(30IRE), 0.4Lux(50IRE) F1.2

0.0002Lux(15IRE), 0.0005Lux(30IRE), 0.0008Lux(50IRE) F1.2

1.0Vp-p/ 75ohm Video 0.714Vp-p

0.45, 0.5, 0.6, CRT , LCD

LENS, AGC, SENS-UP, BACK LIGHT(BLC, HLC, D-WDR),
3D-DNR, WHITE BALANCE, DAY & NIGHT
MIRROR, SHARPNESS, GAMMA, MONITOR, LSC,
MOTION, PRIVACY (MASK1 ~MASK8), LANGUAGE

COMMUNICATION, DPC
1/60~1/100,000 1/50~1/100,000
8 Windows(Polygonal, 8 Colors)
AUTO, COLOR, BW, EXT, EXT2
ON / OFF

AUTO, OFF ~x1024
8 Language
ATW / AWC / MANUAL / PUSH
ON / OFF(WDR LEVEL)

OFF, LOW, MID, HIGH

ON / OFF
LOW / MIDDLE / HIGH / OFF

TV System
S
Total Pixel
Eective Pixel

ensor

Synchronization
Scanning System

Horizontal Resolution
Min. Illumination

Sens-Up On
Video Output
γ Correction
S/N
O.S.D

Electrical Shutter
Privacy Masking
Day & Night
Motion Detection

Sens-Up(Low Shutter)
Language
White Balance
D-WDR
3D-DNR

HLC
AGC

ON / OFF

LSC

ON / OFF

MIRROR

More than 52dB(AGC o)

PRODUCT WARRANTY CARD

1) ITEM # :

2) S/N # :

3) INSTALLATION CONDITION

- Indoor  / Outdoor 

- Power supply SPECIFICATION :

DC12V  / AC24V 

CURRENT __________ mA

4) TROUBLESHOOTING

- No picture 

- Bad image 

- No power 

- Water damage 

- LED ON  / OFF 

- ETC.  :

* Please keep this warranty card with the manual.
* Please fill out this warranty card and send us this warranty card
with the faulty units together.

Following cases can be charged even within the warrany period.

a. When defects are caused by user’s carelessness.

b. When improper or unauthorized repairs are done or when the inside is

modified or damaged.

c. Defects caused by natural disaster or power problem.

d. When the warranty card is not filled out or corrected unconfirmed.