![](/html/f3/f309/f309fbb57df8c8007773258e8f3350af025adbcc43dcbfd2bed08f4bc81f2de0/bg1.png)
CHEF BASES
Side Mounted Condensing Unit
CHEF BASES (SIDE MOUNT)
ECB – Series
• ECB36D2 • ECB48D2 • ECB52D2 • ECB52-60D2
Cabinet Construction
Heavy duty stainless steel interior and exterior, with galvanized steel finished
bottom and back wall of exterior. High quality 15 gauge stainless steel worktop.
2.5" thick high density foamed-in-place polyurethane insulation. Four (or six) 4"
diameter casters (front casters with brakes) with additional front weight support
legs. 12 gauge sheet metal caster brackets installed at bottom of cabinet to
support heavy weight on worktop. Air chamber vent system and high heat
insulation tech-mat layer allow worktop surface to withstand up to 500˚F which
eliminates warping and bubbling of sheet metal from prolonged exposure to high
temperatures. Durable stainless steel corner guards mounted on the top surface
prevent cooking equipment from accidentally sliding off the unit. Heavy duty
ECB36D2
stainless steel top surface grips for easy and safe maneuverability of the unit.
Refrigeration System
Side mounted condensing unit for large compartment use for drawers
•
Oversized condenser and evaporator coils quickly achieve and maintain desired
•
temperature
•
Forced-air cooling with two (or three) evaporator fan motors providing balanced
airflow throughout cabinet to ensure faster temperature drop
•
Removable side panel and slide-out condensing unit for convenient repair and
maintenance
•
Removable condenser coil air filter for easy cleaning
•
ECB48D2
Environmentally friendly CFC free R-134A refrigerant
•
Air defrost, time initiated and terminated
•
Copper tube and aluminum fin evaporator with anti-corrosive coating
•
Energy efficient condensate drain pan assembly heated by high side copper tube
•
Pressure relief port for rapid carbinet re-entry
•
Pre-wired and ready to plug,
www.EVERESTref.com
115V/60Hz/1Ph, NEMA 5-15P
• Project / Customer
• Item No.
• Model No.
ECB52D2
ECB52-60D2
Drawers
•
Heavy duty stainless steel interior and exterior
•
Heavy duty 304 stainless steel drawer frames with low-friction ball bearing slides
•
2" thick foamed-in-place polyurethane insulation
•
One piece snap-in drawer gaskets for easy replacement
•
Heavy duty recessed drawer handles for a flat surface
•
Sanitary polycarbonate full size pans
Temperature Control
•
Factory preset temperature, 35˚F
•
Temperature setting range from 33˚F to 54˚F
•
Easy to read digital temperature display
•
Easy to program push button temperature control
•
Microchip digital control and monitoring system with a variety of functions to
monitor and maintain optimum temperature
Recommended Operating Conditions
•
Minimum clearance of 4" is required between bottom of cooking equipment
heating element and chef base worktop. Failure to provide clearance voids
manufacturer warranty.
•
Warranty Contact
5 Year — Compressor Warranty
3 Year — Parts & Labor Warranty
(Note: refer to website for pan configurations )
201 W. Artesia Blvd, Compton, CA 90220
T. (310) 323–6586, (800) 444–6285
F. (310) 323–7524, (310) 761-1127
![](/html/f3/f309/f309fbb57df8c8007773258e8f3350af025adbcc43dcbfd2bed08f4bc81f2de0/bg2.png)
CHEF BASES
Side Mounted Condensing Unit
ECB – Series
Dimensions
SIDE VIEW
Stainless Steel Grips
Heavy duty stainless steel
top surface grips for easy
4 1/2"
and safe maneuverability
of the unit.
1"
21 3/4"
• ECB36D2 • ECB48D2 • ECB52D2 • ECB52-60D2
Corner Guards
Durable stainless steel corner
1 3/4"
guards mounted on the top
4 1/2"
32 1/8"
29 1/2"
surface prevent cooking
equipment from accidentally
sliding off the unit.
Air Chamber & Vent
20"
www.EVERESTref.com
32 1/8"
1/6
36 3/8"
22"
ECB36D2
12 3/4"
1
20" 5"
25"
Model
ECB36D2
ECB48D2
ECB52D2
1/6
48 3/8"
35"
ECB48D2
Ref/
Frz/
Dual
Ref
Ref
Ref
# of
Drawers
2
2
2
32 1/8" 12 3/4"
20" 5"
25"
# of
Pans
1 x 2
1/6 x 6
1 x 4
1/6 x 6
1 X 6
HP
1/5
1/4
1/4
Refrigerant
R-134A
R-134A
R-134A
Power
(V-Hz-Ph)
115-60-1
115-60-1
115-60-1
11
51 7/8"
41 1/8"
ECB52D2
Amps
4.20
4.40
4.40
32 1/8" 21 3/4"
20" 5"
25"
Max. Weight
Support
Capacity (LBS)
717
717
717
Crated
Weight
(LBS)
TBA
TBA
315
Exterior Dimensions
L
36 3/8
48 3/8
51 7/8
(Inches)
†
D
32 1/8
32 1/8
32 1/8
1
60"
41 1/8"
ECB52-60D2
H
20
20
20
32 1/8" 21 3/4"
20" 5"
25"
Height does not
include 5" for casters
†
Depth does not include
1" for stainless steel grip
Ref = Refrigerator
Frz = Freezer
Dual = Ref & Frz Combo
ECB52-60D2
Disclaimer: Product dimensions are for general purposes and not absolute value. Slight variations may exist. If dimensions are critical, please contact Everest.
Specifications subject to change without notice.
Ref
2
1 X 6
1/4
R-134A
T. (310) 323–6586, (800) 444–6285 F. (310) 323–7524, (310) 761-1127
115-60-1
201 W. Artesia Blvd, Compton, CA 90220
4.40
717
337
60
32 1/8
Please visit our website for updated Energy Efficiency information
20
R
C
US
ISO-9001