Page 1
Page 1
Everbright Lighting Ltd. Energy Saving Lamp FCC ID: QJKEBETUS0310
EXHIBIT 7
User Manual
Page 2
Page 2
Everbright Lighting Ltd. Energy Saving Lamp FCC ID: QJKEBETUS0310
USER MANUAL OF ENERGY SAVING LAMP
Self-ballasted fluorescent (electronic energy saving lamp) is a new kind of
lighting style that uses trip-phospher tube with electronic ballast. It is
characterized of energy saving, long life and flicker-free, and is widely used for
restaurants, hotels, shops, homes lighting.
1. Specifications:
EBU - 5W, 7W, 11W, 13W, 15W AC 120V 60Hz
2. Working environment temperature: -18~ 40.
3. Precautions:
z Use only on 120 volt, 60 hertz;
z Never disassemble of modify the lamp---any changes could void the user’s
authority to operate this device;
z Not for use in totally enclosed fixture;
z Risk of electric shock---do not use where directly exposed to water;
z This device is not intended for use with emergency exit fixtures or
emergency exit lights;
z To prevent burns, do not touch the bulb or cap during operation or
immediately after switching off;
z Handle the plastic enclosure when replacement;
z Not for use with dimmers, electronic timer or photocell devices or
occupancy sensor.
z This product could produce interference when used near a TV, radio,
wireless remote control or maritime safety communications
equipment or other critical navigation or communication equipment
operating between 0.45-30MHz.
If interference should occur, move the
lamp away from the appliance a distance of three feet or more. Or plug the
lamp or the compliance into a different outlet.
Page 3
Page 3
Everbright Lighting Ltd. Energy Saving Lamp FCC ID: QJKEBETUS0310
z To prevent risk of fire, never install this device in the following fixtures:
a. Fixture on dimming circuits.
b. Emergency exit lights powered by direct current (DC).
4. COMPLIANCE INFORMATION STATEMENT
Product Name: Energy Saving Lamp
Model number: EBU - 5W, 7W, 11W, 13W, 15W
This device complies with part 18 of FCC Rules.
******
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance will void the user’s authority to
operate this equipment.
Loading...