EVENROUTE IQroute Quick Installation Manual

Quick Installation Guide

router

Before you begin

○ The initial configuration can be accomplished over WiFi or via Ethernet.

○ Unplug all WiFi extenders in your home. You will need to re-enroll them with IQrouter once

done with the configuration.

What’s in the box

Note: Antennas are not aached

IQrouter

Installation Overview

Power Adapter

Internet

Existing
Modem

Cable

Ethernet Cable

IQrouter

Ethernet Cables

Power Adapter

WiFi
(optional)

(Optional)

First – Connect the hardware

1 - Disconnect any third-party routers from the ISP-supplied modem. Leave the modem on

and in place. If the ISP-supplied modem includes WiFi, turn off the WiFi and unplug any LAN cables.

2 - Screw the antennas onto the IQrouter. Make sure they are on tightly.

v-1.4

©2016 EvenRoute LLC

1

3 - Connect the ethernet cable coming from the

modem to the internet (blue) port of the IQrouter.

4 - Connect the power

adapter to the IQrouter.

5 - Be sure the modem is on before turning on

the IQrouter. Turn on the IQrouter.

IQrouter

6 - Wait a few minutes for the LEDs to light up,

and check them to make sure the hardware
connection is correct.

Next – Configure the IQrouter

1 - Connect the IQrouter to a computer

with an ethernet cable, or via WiFi.
If connecting by WiFi, the SSID is

changeme and the password is
changeme. Note: this WiFi will only

exist during setup; you will be required to
change it.

Power

On

System

Flashing,

then On

Ethernet
Ports

WiFi

On/Flashing

Ethernet Cable (optional)

Internet

On/Flashing

WiFi (optional)
SSID: “changeme”
Password:
“changeme”

2 - On your computer open a browser window

(Internet Explorer, Firefox, Safari, Chrome, etc) and
type this address:

iqrouter.menu
(Note: if that doesn’t work, type 192.168.0.1)

iqrouter.menu

2

©2016 EvenRoute LLC