EVE audio SC205 User Manual
EVE AUDIO PRODUCT MANUAL
AUG 2013
SC204
SC205
SC204
SC205
EVE Audio product manual
SAFETY INSTRUCTIONS
To avoid the risk of electrical shock, do not attempt to open the unit.
There are no user-serviceable parts inside. Do not attempt to service the
equipment yourself. In case of problems, please contact your local dealer
or distributor.
This unit should be connected to a grounded power outlet. If you use
!
extension cords and power distributors they should be grounded as well.
Verify that the specied operating voltage on the rear side matches the
!
local mains voltage. If these values do not match you will have to adjust
the loudspeaker setting appropriately and change the fuse type.
Use only the fuse types specied on the rear side of the unit. Never bypass
the fuse.
Make sure that no liquids wet the inside of the cabinet. Never spray, pour
or spill liquids directly onto the unit.
Do not use a wet cloth nor ammable or acid chemicals for cleaning.
Do not touch the diaphragms of the loudspeaker and do not obstruct the
!
bass reex ports.
Make sure there is enough air ow behind the loudspeaker to maintain the
!
electronic components cool.
Do not expose this product to extreme temperatures.
!
The diaphragms build up a magnetic eld around the loudspeaker.
High sound pressure levels can damage your hearing permanently! Avoid
standing close to loudspeakers producing high sound pressure levels.
TABLE OF CONTENTS
1. INTRODUCTION ............................................................................4
2. QUICK START .................................................................................5
2.1. First Steps .............................................................................................................................5
2.2. Speaker Connection .........................................................................................................5
2.3. Powering On .......................................................................................................................5
3. OPERATION ...................................................................................6
3.1. First Steps .............................................................................................................................6
3.2. The Grid ................................................................................................................................6
3.3. Operating Modes ..............................................................................................................7
3.4. Powering on/o: Standby Mode .................................................................................7
3.5. Volume Mode .....................................................................................................................8
3.6. Settings Menu .................................................................................................................... 9
3.7. Filters .....................................................................................................................................9
3.8. Low Filter ..............................................................................................................................9
3.9. High Filter.......................................................................................................................... 10
3.10. Low and High Filter Combinations .......................................................................... 11
3.11. Desk Filter ......................................................................................................................... 11
3.12. LED Mode .......................................................................................................................... 12
3.13. Saving Your Settings ..................................................................................................... 12
3.14. Power Switch ................................................................................................................... 12
3.15. DIP Switches ..................................................................................................................... 13
3.16. Power Connector (IEC) ................................................................................................. 13
4. POSITIONING ..............................................................................14
4.1. Wall Mounting ................................................................................................................. 14
4.2. Bottom Side...................................................................................................................... 14
4.3. Speaker Positioning + Rubber Feet ......................................................................... 15
4.4. Height and Distance ..................................................................................................... 16
4.5. Stereo Setup..................................................................................................................... 16
4.6. Stereo Setup + Subwoofer (2.1) ................................................................................ 17
4.7. Multichannel Setup (5.1) ............................................................................................. 17
4.8. Mixer/Workplace Reections ..................................................................................... 18
4.9. Room Acoustics .............................................................................................................. 19
5. TECHNICAL SPECIFICATIONS .....................................................20
6. DECLARATION OF CONFORMITY ...............................................21
7. WARRANTY ..................................................................................22
2 3
SC204
SC205
EVE Audio product manual
1. INTRODUCTION
Thank you for your time and interest in the EVE Audio product range.
EVE Audio is a loudspeaker manufacturer based in Berlin, Germany, that
specializes in the development and design of unique studio monitors.
The use of rst-class components is our highest priority because we rmly
believe this is the only way to manufacture rst-class products.
You have chosen a loudspeaker from our SilverCone SC series. Both models
— SC204 and SC205 — are living proof that small loudspeakers can sound
big. They were conceived as two-way systems for use in home studios, as
well as in professional recording and post-production studios.
These models combine a 4” or 5” SilverCone chassis with the Air Motion
Transformer developed by EVE Audio for the RS series. The loudspeaker
systems are completed by two 50 W ampliers and high-resolution DSP
technology.
The threads on the bottom allow the SC204 and SC205 to be mounted on
any commercial microphone or loudspeaker stand, while the brackets on
the rear side allow them to be wall mounted. For detailed information refer
to the corresponding chapter in the user’s manual.
We wish you enjoy your new EVE Audio monitor. If you have any questions
regarding our products, do not hesitate to contact your nearest dealer or
get directly in touch with us... We will be more than happy to help you
out!
All the best from Berlin.
The EVE Audio Team
2. QUICK START
If you already have experience with studio monitors, the Quick Start guide
ought to be more than enough to get you started.
For unexperienced users we recommend reading the whole user’s manual
in order to prevent any misuse.
2.1. First Steps
Check the package components (loudspeaker, user’s manual, power cord,
grid, rubber feet).
Check the setting of the DIP Switches (variable).
2.2. Speaker Connection
Connect one of the monitor inputs on the rear side (RCA or XLR) to the line
output of a playback source, for instance an audio interface. The output
level should be as low as possible.
2.3. Powering On
Engage the Power switch on the rear side of the loudspeaker to turn it on
or o.
The LEDs around the Volume control on the front panel will light up
clockwise. If the LED on the right end is dimly lit, this indicates that the
loudspeaker is in Standby Mode. Press the Volume control to turn the
loudspeaker on. If you turn the Volume control counter clockwise until the
LED on the left end lights up dimly the loudspeaker will be muted.
Increase the output level on the source device until the LED ring starts to
blink, then reduce the output level a bit. The maximum operating level for
the input (i.e. the analog to digital converter) is now set optimally. To set
the desired listening volume use the Volume control on the loudspeaker.
The LED ring indicates the volume setting. If the LED ring starts to blink,
reduce the output level on the signal source.
4 5
INTRODUCTION
Powering On
QUICK START
SC204
SC205
3. OPERATION
3.1. First Steps
Rückseitige Anschlüsse & DIP-Schalter
EVE Audio product manual
Wrong grid position < > Correct grid position
Hold the grid with your ngers parallel to the front side of the monitor. The
perforated hexagon must exhibit two horizontal sides. Make sure that the
grid remains parallel to the front side.
Draw the grid close to the tweeter. The tweeter’s magnetic eld will attract
and x the grid, which can always be adjusted later if needed.
Check the package components (loudspeaker, user’s manual, power cord,
grid, rubber feet).
Check the setting of the DIP Switches (variable).
Connections: there are two input connectors on the rear side. These allow
the connection of balanced sources with XLR connectors or unbalanced
sources with RCA connectors.
• Pin assignment XLR: 1= Shield, 2= hot (+), 3= cold(-).
• Pin assignment RCA: Center conductor= Signal, Ring= Shield.
Both analog inputs can be used simultaneously, whereby the signals are
summed.
The maximum level of the source signal should not exceed 8 dBu. If the
input is overloaded the LED ring will start blinking.
3.2. The Grid
In order to protect the tweeter, your EVE Audio monitors are supplied with
a metal grid, which has no impact on the sound. The grid is attached to the
tweeter by means of magnetic attraction.
Be careful not to damage the folded tweeter diaphragm when placing the
grid:
6 7
OPERATION
The Grid Powering on/off: Standby Mode
3.3. Operating Modes
Standby Mode | Volume Mode (-10dB) | Setting Menu (Low lter @ -2dB)
3.4. Powering on/off: Standby Mode
Press and hold the control three seconds in order to put the monitor in
Standby Mode. The volume will decrease gradually while the LED ring
lights up once around the Volume control. Afterwards, the LED on the right
end will light dimly and the power consumption is reduced to 1watt.
! To exit the Standby Mode press briey the Volume control once again. The
level will increase gradually.
OPERATION
Loading...