EUTECH INSTRUMENTS CyberScan PCD 650 Quick Manual

• Use keypad buttons to access

the functions displayed above it.

• The fi rst function group appears when you enter

“Measurement” mode. Use and to access
the 2nd and 3rd function groups.

• Use or to toggle selection and increase

or decrease values in Setup & Calibration modes.

• Use to confi rm value selections and

calibrations during Setup and Calibration
procedures.

■

System Set Up Mode

• Select “System” to customise your parameters and system settings, including password confi guration.

Quick Guide

Waterproof CyberScan PCD 650

pH/mV/Ion/Conductivity/TDS/Resistivity/Salinity/
Dissolved Oxygen/ºC/ºF

■

Keys & Functions

Keys Functions

Activates/Deactivates freezing
of measurement

Activates calibration mode

Selects parameter

Shuts off meter (hold for 3 seconds)

Switches between diff erent
function groups

Activates setup mode

Recalls stored data from memory

Stores data into memory

Escapes to 1

st

function group

Shows calibration report

Sends data to PC or printer

Activates temperature calibration mode

1st Function Group

2nd Function Group

3rd Function Group

Please turn overleaf >>

System - Page 1

• ‘Stable’ Indicator: ENABLE

• Stability Criteria: FAST

• Auto Hold: DISABLE

• Tem. Display From: pH/Cond

• Display Setting:

- 1st Row: pH

- 2nd Row: Conductivity

- 3rd Row: DO (%)

System - Page 2

• Year: 2006

• Month: Jan

• Day: 01

• Hour: 00

• Minute: 00

• Second: 00

System - Page 2

• Year: 2006

• Month: Jan

• Day: 01

• Hour: 00

• Minute: 00

• Second: 00

System - Page 3

• Auto-Off : ENABLE

• On Time: 10 Mins

• Back Light Settings:

- Permanently On: DISABLE

- On With Key Press: DISABLE

- On Time With Key: 1 Min

System - Page 3

• Auto-Off : ENABLE

• On Time: 10 Mins

• Back Light Settings:

- Permanently On: DISABLE

- On With Key Press: DISABLE

- On Time With Key: 1 Min

System - Page 4

• Print Mode: IrDA

• Data Format: CyberComm

• Current Data Set: TIMED

• Interval: 9 Secs

• Fixed Setting: 2400 8-N-1

System - Page 4

• Print Mode: IrDA

• Data Format: CyberComm

• Current Data Set: TIMED

• Interval: 9 Secs

• Fixed Setting: 2400 8-N-1

System - Page 5

• Password
Protection: DISABLE

• Set Password: 00000

• Confi rm Password: NO

System - Page 5

• Password

Protection: DISABLE

• Set Password: 00000

• Confi rm Password: NO

System - Page 6

• Clear Logged Data
Memory: NO

• Factory Reset: NO

System - Page 6

• Clear Logged Data

Memory: NO

• Factory Reset: NO

Part of Thermo Fisher Scientifi c

68X068067 07/08 Rev 1

■

pH, Ion & Temperature Set Up Mode

• Access “pH” to confi gure pH calibration-related settings, alarm set points and pH resolution.

• Access “Ion” to select measurement units.

• Access “Temperature” to select measurement units and temperature compensation mode.

pH - Page 1

• Buff er: USA

• Cal Points: 3

• pH Alarm:
DISABLE

• Set Points:

- Hi pH: 20.00 pH

- Lo pH: 0.00 pH

pH - Page 1

• Buff er: USA

• Cal Points: 3

• pH Alarm:

• Set Points:

- Hi pH: 20.00 pH

- Lo pH: 0.00 pH

- Lo pH: 0.00 pH

pH - Page 2

• pH Calibration
Due: 5 DAYS

• pH Resolution:

0.00

Ion - Page 1

• Ion Unit: ppm

Ion - Page 1

• Ion Unit: ppm

Temp - Page 1

• Unit: ºC

• Mode: ATC

■

Conductivity, TDS, Salinity, Resistivity Set Up Mode

• Access “Conductivity”, “TDS”, “Salinity” and “Resistivity” to confi gure pure/linear temperature

coeffi cients, normalisation temperature, cell constant, calibration-related settings as well as alarm set
points limits.

Conductivity - Page 1

• Pure Water Coeffi cient: ENABLE

• Linear Temp Coeffi cient: 2.100

• Normalisation Temp: 25.0

• Cell Constant: 1.000

• Calibration Due: DISABLE

• Calibration Points: SINGLE

• Calibration Std: AUTO

TDS - Page 1

• Pure Water Coeffi cient: ENABLE

• Linear Temp Coeffi cient: 2.100

• Normalisation Temp: 25.0

• Cell Constant: 1.000

• Calibration Due: DISABLE

• Calibration Points: SINGLE

• TDS Factor: 0.500

Salinity - Page 1

• Pure Water Coeffi cient: ENABLE

• Linear Temp Coeffi cient: 2.100

• Normalisation Temp: 25.0

• Cell Constant: 1.000

• Calibration Due: DISABLE

• Calibration Points: SINGLE

Resistivity - Page 1

• Pure Water Coeffi cient: ENABLE

• Linear Temp Coeffi cient: 2.100

• Normalisation Temp: 25.0

• Cell Constant: 1.000

• Calibration Due: DISABLE

• Calibration Points: SINGLE

Resistivity ­Page 2

• Resistivity
Alarm: DISABLE

• Set Points:

- Hi: 2.00 Ω

- Lo: 1.00 Ω

Salinity ­Page 2

• Salinity Alarm:
DISABLE

• Set Points:

- Hi: 2.000 ppm

- Lo: 1.000 ppm

Cond - Page 2

• Conductivity
Alarm:
DISABLE

• Set Points:

- Hi: 2.000 µS

- Lo: 1.000 µS

TDS - Page 2

• TDS Alarm:
DISABLE

• Set Points:

- Hi: 2.00 ppm

- Lo: 1.00 ppt

■

Dissolved Oxygen % Saturation & Concentration Set Up Mode

• Access “Setup” to confi gure calibration-related settings, unit of measure, pressure and salinity settings

as well as alarm set points limits.

DO (%) - Page 1

• Off set Cal: 0.0 %

• Calibration Due (%): 5 DAYS

• Select Pressure Unit: mmHg

• Measured Pressure: 760.0

• Adjusted Pressure: 760.0

• Pressure Comp: ENABLE

DO (mg/L) - Page 1

• Select DO Unit:
mg/L

• Auto Salinity Comp:
DISABLE

• Set Salinity:

0.0 ppt

DO (%) - Page 2

• DO Alarm: DISABLE

• Set Points:

- Hi DO: 200.0 %

- Lo DO: 10.0 %

DO (mg/L) - Page 2

• DO Alarm: DISABLE

• Set Points:

- Hi DO: 20.00 mg/L

- Lo DO: 1.00 mg/L