Eurosound BagAmp User Manual [ru]

BagAmp

PORTABLE

SOUND

SYSTEM

USER MANUAL

Your BagAmp is a self-contained portable amplifier system designed to be
an easy to carry solution for voice or music amplification in small to medium
size settings.

General Design

BagAmp is a long thin column made from a rugged composite material that
contains a preamplifier, a power amplifier, and loudspeakers in this one unit.

The preamplifier has two identical input channels that accept instrument
level (using a 1/4-inch phone plug), microphone, or line levels (using an XLR
plug), and provide signal level control, as well as phantom power for using
condenser microphones. The power amplifier directly powers the eight (8)
75mm diameter AudioPiston flat face loudspeakers.

Front panel controls are arranged as two vertical groups, one for each of
the two input channels, plus a master volume control, power indicator, and
mute button and indicator. Each channel has a Gain control, reverb control,
and EQ control. If a 1/4-inch phone plug is connected to the channel input the
system has a natural sensitivity appropriate for guitar or other instrument
pickup signal levels. If an XLR plug is connected, then the -10dB “pad” button
can be used to reduce the signal level of that input to avoid distortion or to
simply lower the level to best match the other channel being used. The
“Phantom” power button switches on and off 48VDC phantom power to both
channels. The “Master” volume knob adjusts the overall loudness of the
system. And, the “Mute” button shuts off the signal to both the internal power
amplifier and to the rear panel line output.

• 250W RMS class D amplifier provides high efficiency
and cool operation

• Eight 3” line array high-excursion piston speakers

• 2 XLR-1/4” combo inputs with independent control and
10dB attenuator switch

• Selectable 48V phantom power for condenser

• Constructed of durable, lightweight polymer composite

• Balanced XLR output with independent level control
connects to optional powered subwoofer

microphones

material

(sold separately)

• Separate EQ control on each channel

• DSP Reverb with Level controls for each channel

• Main level control with mute switch

• Tripod speaker stand and nylon carrying bag included
for easy setup and transport

2

IMPORTANT SAFETY INSTRUCTIONS

Your Bag-Amp is made of a very durable polymer composite material. However, extra care should be
taken to protect the finish and speakers. These simple tips will help reduce wear and tear on your
Bag-Amp.

1. Read all instructions before using.

2. Avoid direct contact with the speaker. Care should be taken to avoid damage to speakers.

3. Do not use or store around excessive moisture.

4. At very high volume this product may be capable of producing sound levels that could cause hearing
damage. Do not operate at uncomfortable levels for prolonged periods. If hearing loss or ringing in ears
in experienced, consult a physician.

5. The Bag-Amp should be positioned so that proper ventilation is maintained.

6. Keep away from heat sources such as radiators, heat vents, and other devices (including amplifiers)
that produce heat.

7. The Bag-Amp should be connected to a power supply described in the operating instructions or as
marked. Replace fuse with correct type, size, and rating.

8. The power supply cord should: (1) be undamaged, (2) never share an outlet or extension cord with
other devices so that the outlet has exceeded the maximum rating, and (3) never be left plugged into the
outlet when not being used for a long period of time.

9. This product should be serviced by qualified service personnel if:

• The power supply cord or the plug has been damaged.

• One of the speakers has been damaged.

• There has been excessive exposure to rain.

• The Bag-Amp does not appear to operate normally or exhibits a change in performance.

• The unit has been dropped, or the enclosure damaged.

• Do not attempt to service the product beyond what is described in these instructions. All other repairs
should be referred to qualified service personnel.

• Clean only with damp cloth.

• Use only with the supplied stand.

• Units designed with Class-I construction (like the Bag-Amp) must be connected to an outlet with a
grounded connection.

3