Euroshine Professional Plus User Manual
PROFESSIONAL PLUS MODEL
INSTRUCTION BOOKLET
USER’S MANUAL
www.euroshine.com
STRUCTURAL ILLUSTRATION
DIAGRAM OF PARTS ……………………………………………………………..03……
DIAGRAM OF DISPLAY ……………………………………………………….….04…...
ILLUSTRATION……………………….……………………………………………………….….05…...
OPERATION INSTRUCTION …………………………………………………….…………...06…...
FEATURES & EFFECTIVENESS ………………………………………………………….….07…...
EXERCISE ILLUSTRATION……………………………………………………………….….08…...
SAFETY CAUTIONS ……………………….……………………………………………….….09…...
PRODUCT MAINTENANCE ……………………………………………………………….….10…...
SPECIFICATION…………………………………………………………….……………….….19……
INTRODUCTION
The you for purchasing the Euro Body Shaper Pro Plus. Please read the operation
manual thoroughly before you begin operating the machine. This operation
manual should be kept available for future reference after you have read it
through.
Euroshine reserves the right to alter the design pictures and material color without
prior notice. Design, pictures and material color displayed in this manual is solely
for illustration purposes only.
The Euro Body Shaper Pro Plus offers two vibration modes, since there are two
motors in the unit. The Euro Body Shaper Pro Plus offers vertical & spiral vibration, as opposed to traditional vibration exercise machines that only offer vertical
vibration.
SPECIAL ILLUSTRATION
1
2
3
4
5
6
7
8
9
10
11
12
1. SCREW (M5X8) 7. SCREW (M8X55)
2. DISPLAY BOARD 8. SCREW (M8X20)
3. SIGNAL LINE CONNECTOR (UPPER) 9. GASKET
4. DECORATION COVER 10. SIGNAL LINE CONNECTOR (LOWER)
5. HANDRAIL 11. STEPPING BOARD
6. STAND POST 12: BASE COVER
DISPLAY DIAGRAM
15
14
13
12
888 888
888 888
M
USB
P1 P2 P3
START
STOP
1
2
3
4
5
6
11
1. HEARTRATE INDICATOR
2. HEARTRATE / MODE DISPLAY
3. SPIRAL SPEED DISPLAY
4. FUNCTION INDICATOR
5. SPIRAL VIBRATION SPEED / TIME ADJUST
6. START / STOP BUTTON
7. TIME BUTTON
DISP
10
8. VIBRATION MODE BUTTON
9. TIME AND VIBRATION MODE CHANGE
10. TIME (-) DECREASE
11. TIME (+) INCREASE
12. SEESAW VIBRATION SPEED / TIME ADJUST
13. SEESAW SPEED DISPLAY
14. TIME / VIBRATION MODE DISPLAY
15. TIME INDICATOR
P T
9
7
8
ASSEMBLY
1. PLACE THE BASE PLATE ON A FLAT FLOOR. WARNING: BASE PLATE IS EXTREMELY HEAVY,
PLEASE USE TWO ADULTS TO TAKE THE BASE PLATE OUT OF THE PACKING CARTON.
2. CONNECT THE SIGNAL LINES (UPPER & LOWER) IN BASE PLATE AND STAND POST.
3. PLEASE BE CAREFUL WHEN CONNECTING THE TWO SIGNAL LINES. ONE PERSON SHOULD
HOLD THE POST FIRMLY AND THE OTHER PERSON TO CONNECT THE SIGNAL CABLE
CAREFULLY. IT IS STRONGLY ADVISED THAT TWO PEOPLE ASSEMBLE THE MACHINE.
4. ATTACH THE BASE PLATE AND STAND POST TOGETHER. WHEN ATTACHING THE STAND POST
TO THE BASE PLATE, PLEASE BE CAREFUL THAT IT DOES NOT SPLIT THE SIGNAL CABLE.
SPLITTING THE SIGNAL CABLE WILL CAUSE THE MACHINE NOT TO WORK.
5. LOCK THE STAND POST AND BASE PLATE TOGETHER WITH SCREWS TIGHTLY.
6. INSTALL THE HANDRAIL ON THE STAND POST WITH THE SCREWS.
7. ADJUST THE HORIZONTAL CUSHION TO SET THE MACHINE STEADY.
8. CONNECT THE POWER PLUG.
9. TURN ON THE POWER SWITCH LOCATED AT THE BACKSIDE.
10. PRESS THE START BUTTON TO ENSURE
OPERATION INSTRUCTION
1. INSERT THE POWER PLUG CORRECTLY INTO THE POWER SOCKET OF THE VIBRATION PLATE.
CHECK THE VOLTAGE AND SWITCH ON POWER.
2. CHOOSE YOUR DESIRE POSTURE ON THE VIBRATION PLATE AS SHOWN BY THE SKETCH
MAPS.
3. PRESS THE START BUTTON TO BEGIN THE PROGRAM. WHEN USING THE AUTOMATIC PRO-
GRAM MODES, THE SPEED CANNOT BE ADJUSTED MANUALLY. THE MACHINE WILL ALTERNATE THE VIBRATION SPEED AT THE BELOW PRESET INTERVALS.
4. IT IS ADVISABLE TO DRINK 500ml OF LUKEWARM WATER BEFORE USE IN ORDER TO ELIMI-
NATE TOXIC WASTES.
5. DO NOT USE MORE THAN 20 MINUTES EACH TIME.
6. PLEASE TAKE A 15-20 MINUTE BREAK BEFORE STARTING ANOTHER SESSION.
CONTROL PANEL IS PICTURED BELOW. FUNCTIONS ARE ON THE NEXT PAGE.
Loading...