Euroscreen SETIN2417-D Datasheet
Sesame 2.1 Tab Tension
SCREEN SURFACES
FlexWhite
Pliable matt white front surface, superb colour rendition,
Full HD compliant. Gain 1.0.
ReAct II
Pliable silver grey front
surface, enhances colour
contrast in bright light, Full
HD compliant. Peak gain 1.1
FlexRear
Neutral grey rear projection
surface. Only available without
borders. Gain 2.5.
PROJECTION FORMATS
Available in sizes without
NO
BLACK
BORDERS
4 : 3
16 : 10
black borders.
The screen has 5 cm wide
black borders. The format of
the viewing area is 4:3.
The screen has 5 cm wide
black borders. The format of
the viewing area is 16:10.
The Sesame 2.1 is an award winning case with an innovative recessed
ceiling design for installation within a ceiling void, suitable for installation
in suspended or plastered ceilings. The Tab Tension function provides a
perfect lay flat viewing surface, ideal for short throw projectors. Adjustable
inner brackets allow for fine-tune of bottom dowel for perfectly flush closure
when retracted up into case. The white aluminium case itself has a stylish
appearance and unique removable integrated external flange profiles for
easy and quick service access. The case also features a concealed drop
function of the complete screen section which enable for easy access to
install case first and screen later. Brackets especially designed for Sesame
2.1 provides a trouble-free installation of the case in a prepared ceiling cutout up to a 100 m ceiling void. If black borders are chosen, a 30cm black
drop is standard. Motor is by default on the viewers right side.
SCREEN DIMENSIONS
Total width = Screen width + 525
Width: ceiling cut out = Screen width + 485
42
Bracket
Screen width + 471
Power
connector
38
20
The screen has 5 cm wide
16 : 9
black borders. The format of
the viewing area is 16:9.
CONTROL OPTIONS
Installation
5m cable. Needs to be
installed by electrician.
Screen width + 364
Considerations regarding cut out width
Minimum cut out width: screen width + 485
Maximum cut out width: screen width + 523
Recommended cut out width: screen width + 505
CASE DIMENSIONS
Side view
Audience side
37
30
94
Depth, ceiling cutout:
104
100
20
27
140
120
114
Bracket
2
161
©Draper Europe AB. Updated 2012-06-29. www.euroscreens.se
All dimensions are in mm.
Page 1/2
ELECTRICAL SPECIFICATIONS
Sesame 2.1 Tab Tension
Cable Specifications
Thickness: Ø 7 mm
Cable area: 4x0,5mm2 , motor to control
3x0,75mm2 , control to plug
Wires: Black - Up
Brown - Down
Blue - Neutral
Green/Yellow - Ground
5000 36
BRACKET DIMENSIONS
Brackets are included in all Sesame products
Ø 6,5
Ø 10,5
Ø 6,5
Installation cable
Part no: 210673
Enclosed with the screen.
Weight: 0.40kg
Ø 10,5
Motor Specifications
Voltage: 220 V Frequency: 50 Hz
Power: 121 W Momentum: 6Nm
Speed: 28 rpm Protection: IP44
The motor is grounded.
32
Top view
150
4
PACKAGING DIMENSIONS
Lenght
Width
Ø 10,5
Front view
Ø 6,5
Height
84
114
Screen width Box length Box width Box height
1600 2200 245 250
1800 2400 245 250
2000 2600 245 250
2200 2800 245 250
2400 3000 245 250
2700 3300 245 250
3000 3600 245 250
©Draper Europe AB. Updated 2012-06-29. www.euroscreens.se
All dimensions are in mm.
Page 2/2
Loading...