Euro-Pro XSC410 User Manual

Item XSC410

1 YEAR LIMITED WARRANTY

Your Bonus Accessory Pack is warranted to be free from defects in material and
workmanship for a period of one (1) from the date of delivery when utilized for
normal household use by the original purchaser only. The included Warranty
Registration Card must be filled out and returned within 10 days of purchase.
This is essential for your Warranty to be effective should any problem arise with
this product.

Should any defect covered by the terms of the limited warranty be discovered
within one year, EURO-PRO Operating LLC will repair or replace any defective
part provided the unit is returned by the original purchaser, freight prepaid, to:

EURO-PRO Operating LLC., 94 Main Mill street, Door 16, Plattsburgh, NY 12901 Tel.: [phone]

Proof of purchase date and $ 8.95 for handling and return packing/shipping
charges must be included.*

The liability of under this warranty is limited solely to the cost of the replacement
parts or the complete unit at our option. LABOUR CHARGES ARE NOT
INCLUDED.

This warranty does not cover normal wear of parts and does not apply to any unit
that has been tampered with or used for commercial purposes. This Limited
Warranty does not cover damage caused by misuse, negligent handling, or
damage due to faulty packaging or mishandling in transit (by any common
carrier).

This warranty is extended to the original purchaser of the unit and excludes all
other legal and/or conventional warranties. The responsibility of EURO-PRO
Operating LLC , if any, is limited to the specific obligations expressly assumed by
it under the terms of the limited warranty. In no event is EURO-PRO Operating
LLC liable for incidental or consequential damages of any nature whatsoever.
Some States/Provinces do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.

This warranty gives you specific legal rights which vary from state to state or
province to province.

*Important: Carefully pack item to avoid damage in shipping. Be sure to attach
tag to item before packing with your name, complete address and phone number
with note giving purchase information, model number and what you believe is the
problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”.

We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.

Printed in Canada

Rev. 08/03A

Bonus Accessory Pack for Model SC410

Angle Adaptor Not Included.
Shown Assembled to Triangle
Brush for Application Only

2

1

1) Triangle Brush

2) Detail Brush ( 2 pcs.)

3) Wallpaper Scraper

WARNING: Always insure the unit is “UNPLUGGED” from the wall

receptacle prior to attaching or removing accessories.

All accessories in the Bonus Pack can only be used with

the deluxe hose or with the extension tubes.

Using the Wall Paper Scraper

1. Follow instructions in your Owner's
Manual for attaching the deluxe
hose to the steam cleaner accessories.

2. To attach the 2.5 mm concentrator
to the deluxe hose, push it in until
the locking button on the deluxe
hose clicks in place with the hole
on the 2.5 mm concentrator. See
illustration at right.

3. To attach the wallpaper scraper to

1

Concentrator Not Included.
Shown Assembled to
Wallpaper Scraper for
Application Only

3

Concentrator

Wallpaper Scraper

or

Detail Brush

the concentrator, just
push it in to the end of the concentrator.

Handgrip

OPERATING INSTRUCTIONS

WARNING: Always insure the unit is “UNPLUGGED” from the wall

receptacle prior to attaching or removing accessories.

OPERATING INSTRUCTIONS cont.

Using Your Steam Cleaner with
Triangular Brush

To attach the triangular brush to the
angle adapter, hold angle adapter in
your right hand and the brush in your
left. Insert the angle adapter into the
triangular brush and turn 180° to lock
in place. See illustrations below.

Step 1: The triangle brush w/ angle

adaptor connects either
directly to the handgrip or
may be used with the
extension tubes. To connect
the extension tubes to the
hand grip attach the
extension tubes one onto the
other and then onto the hand
grip. (See illustrations.) To
disconnect, reverse the
operation by pressing the
locking button and pulling the
two sections apart.

Locking
Button

Attaching a Towel to the
Triangular Brush

100% white terry cloth towel can be fitted
on this brush, so as to absorb the dirt and
protect delicate surfaces.

Important: Please note that bristles may

break through thin towels. We recommend
that two (2) towels, laid one on top of the
other be used. This will ensure that the
brush bristles do not break through and
that the towels will be sufficiently absorbent
and retain as much dirt as possible.

Very Important: When installing the

towels to the triangular brush, ensure that
the towels do not cover the front and the
back of the brush. (See fig. D)

Fig. A

1. Prepare white terry cloth towel:
size 8” x 17” as shown in Fig. A.

2. Place the brush on top of the towel.

Fig. B

3. Fold the towel as shown in Fig. B

Fig. C

4. Place the corner under the cloth
holder. (Fig. C)

Fig. D

5. Fold the other side of the towel in
the same way and place the corner
under the cloth holder. (Fig. D).

Extension Tubes

Locking
Button

Hand
Grip

2

3