OWNER’S MANUAL
Garment Steamer
Model SC620
O
R
P
−
O
R
U
E
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
1-800-798-7398
www.euro-pro.com
IMPORTANT SAFETY INSTRUCTIONS
When using your EURO-PRO Garment Steamer, basic safety precautions
should always be observed, including the following:
1. Read all instructions before using your
Garment Steamer.
2. Use the system only for its intended use.
3. To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids.
4. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
5. Do not allow cord to touch hot surfaces.
Let the system cool completely before
putting away or opening water tank
(removing the safety cap). Wrap cord
loosely around system when storing.
6. Always disconnect system from electrical
outlet when filling with water or emptying
and when not in use. Always turn the
safety cap slowly when opening the water
tank . This will allow any remaining steam
to escape gradually.
7. Do not operate the system with a damaged
cord or plug, or if the appliance or any oth er
part of the system has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble or attempt to
repair the Garment Steamer. Return the
system to EURO-PRO Operating LLC (see
warranty) for examination and repair.
Incorrect re-assembly or repair can cause a
risk of electrical shock or injury to persons
when the Garment Steamer is used.
8. Close supervision is necessary for any
appliance being used by or near children.
Do not leave the system unattended while
connected.
9. Burns can occur from touching ho t met al
parts, hot water or steam. Use caution
when draining unit after use as th er e ma y
be hot water in the unit. Never direct steam
at any person. The steam is very hot and
can cause burns.
10. Do not operate in the presence of
explosive and/or flammable fumes.
11. This appliance is intended only for
household use. Follow all user instructions
in this manual.
12. Never use any chemicals or substance
other than tap water in the machine. Use of
chemicals may damage the machine. Use
of chemicals will automatically void your
warranty.
13. Be careful. Burns can occur from touching
HOT METAL PARTS, HOT WATER OR
STEAM.
To reduce the risk of fire, electric shock, or
injury:
• Do not leave the Garment Steamer plugged
in when unattended. Unplug the electrical
cord when not in use and before servicing or
refilling water tank.
• Do not allow to be used as a toy. Close
attention is necessary when used by or near
children, pets or plants.
• Use only as described in this manual. Use
only manufacturer’s recommended
accessories.
• Do not pull cord, use cord as a handle, close
a door on cord, or pull cord around sharp
edges or corners. Keep cord away from
heated surfaces.
• Do not use extension cords or outlets with
inadequate current carrying capacity.
• Turn off all controls as applicable before
unplugging from electrical outlet.
• Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
• Do not handle plug or steam cleaner with wet
hands or operate without shoes.
• Do not put any objects into openings. Do not
use with any opening blocked.
• Store your appliance indoors in a cool, dry
area.
• Keep your work area well lit.
• When in use, never turn the appliance over
or on its side. Never direct steam toward s
people, animals or plants .
• Do not immerse the steam cleaner into water
or other liquids. Always unplug the power
cord from the electrical socket when filling the
steam cleaner.
• Do NOT
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe for
use. Use tap water or distilled/purified
water if the tap water in your area is very hard.
• Always allow the appliance t o co ol
completely for at least 30 minutes before
storing.
• Only hang the steamer hose on the supplied
hanger rod.
• Always disconnect the unit from electrical
outlet before filing with or removing water. Be
careful to AVOID spilling excess water into the
reservoir when removing or placing the
reservoir bottle into the reservoir.
add cleaning solutions, scented
SAVE THESE INSTRUCTIONS
For Household Use Only
1
Rev. 04/02B
Model SC620
1 YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for
a period of one (1) year from the date of purc hase wh en utiliz ed fo r nor mal ho usehold us e by t he or iginal
purchaser only. The attached Warranty Registration Card must be filled out and returned within 10 days
of purchase. This is essential for your Warranty to be effective should any problem arise with this
product.
Should any defect covered by the terms of the limited warranty be discovered within one year, EURO-
PRO Operating LLC will repair or replace any defective part provided the unit is returned by the original
purchaser, freight prepaid, to EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY
12901. Proof of purchase date and $ 14.95 for handling and return packing/shipping charges must be
included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the replacement parts or the
complete unit at our option. LABOUR CHARGES ARE NOT INCLUDED.
This warranty does not cover normal wear of parts and does not apply to any unit that has been
tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused
by misuse, negligent handling, or damage due to faulty packaging or mishandling in transit (by any
common carrier).
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC , if any, is limited to the specific
obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO
Operating LLC liable for incidental or consequential damages of any nature whatsoever. Some States do
not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply
to you.
This warranty gives you specific legal rights which vary from state to state.
PURCHASER___________________________________________________________
DATE OF PURCHASE ___________________________________________________
DEALER ______________________________________________________________
*important: Carefully pack item to avoid damage in shipping. Be sure to attach tag to item before packing
with your name, complete address and phone number with note giving purchase information, model
number and what you believe is the problem with item. We recommend you insure the package (as
damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”.
OWNERSHIP REGISTRATION CARD
Please complete and return within ten (10) days of purchase. The registration will enable us
to contact you in the event a product defect is discovered. By returning this card you
acknowledge to have read and understood the instructions for use, and warnings set forth in
the accompanying instructions
RETURN TO: EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY, 12901
PURCHASER: ……………………………………..…………………………………… ……………
ADDRESS: ………………………………………...……………………………………………….
CITY: ……………………………….. STATE:…………………………………..……………… .
DATE OF PURCHASE: ……………………… MODEL:..…………………………………….
NAME AND ADDRESS OF DEALER: …………………………………………………………..
Printed in China
.
SC620
IMPORTANT NOTES DURING OPERATION
ADDITIONAL IMPORTANT SAFEGUARDS cont.
If steamer hose gurgles during use:
• This is a normal result of
condensation collecting inside the
hose. Simply lift the steam
diffuser/handgrip upward until the
hose is extended to its full height.
• The gurgling will disappear when
the excess moisture inside the
hose has had a chance to drain
back into the base.
If the steamer stops producing
steam then starts again:
• You may wish to examine the
inside of the reservoir. The most
common reason for this effect is
the accumulation of sediment from
mineral laden water.
• Clean the sediment from inside the
water reservoir following the
instructions on page 8.
TROUBLE SHOOTING
Below is a chart detailing the most common problems, their causes and solutions.
PROBLEM CAUSE SOLUTION
1. Steamer is not
1. Plug power cord into
electrical outlet.
2. Refill water tank
following instructions on
page 7.
Steamer Does
Not Get Hot
plugged into
electrical outlet.
2. The water tank is
empty and the
reservoir has
drained.
1. To avoid circuit overload, do not operate another appliance on the same socket (circuit)
2. If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should be used.
Cords rated for less amperage may overheat. Care should be taken to ar
that it
3. Do not leave unattended when the system is connected to a power supply/electrical outlet.
cannot be pulled or tripped over.
range cord so
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WARNING: To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not modify
the plug in any way.
No Steam
Water Drips
From The
Steam Diffuser
1. Wate r level is t oo
low.
1. Condensation has
formed inside the
steamer hose.
9
1. Refill the water tank
following instructions on
page 7.
1. Hold the steamer hose
upright fully extended
and allow excess
moisture to drain back
in the water reservoir.
CAUTION: Hose can become hot during use.
NEVER hold, pull or relocate unit by the
hose while in use. When you need to
move the steamer, hold by the garment
rod. Hold the steamer head by the
handgrip and never by the hose.
2
FEATURES OF YOUR GARMENT STEAMER
OPERATING INSTRUCTIONS cont.
1. The steam diffuser/handgrip at the
end of the steamer hose is located
just behind the garment brush. By
grasping the steam diffuser/handgrip
you can aim the direction of the
steam released from the nozzle.
Caution:
2. The garment brush with its small
3. The garment rod has a convenient
4. The On/Off switch button can be foot
5. The ready light (green) comes on
6. The water tank is removable for easy
7. The Garment Steamer base houses
The steam hose becomes hot
during use. Never hold, pull or move
unit by the hose while in use.
openings is located at the end of the
steamer hose. Always place the
nozzle end of the hose on the
garment hanger when not in use.
Keep the nozzle pointed upwards
and steam will rise from the
openings. Try not to point the nozzle
downwards, water may condense in
the hose during idle periods and drip
from the nozzle.
hook shaped end for resting the
nozzle end of the hose. It can be
extended and retracted by adjusting
the telescopic rod in its sleeve.
activated to turn the power “ON” or
“OFF”.
when the unit is turned “ON”.
filling and is see through for easy
monitoring of the water level. The
screw cap is fitted with a one way
valve to ensure drip free replacement
of the water tank when refilling.
the reservoir, water tank, hose
attachment and adjustable garment
rod.
Step 3: Using Garment Steamer cont.
4. Once steam is being released
from the steam diffuser with the
garment brush attached, hold
the handgrip with the nozzle
facing upward and begin steaming
from the bottom of the garment
allowing the escaping steam to rise
inside and out side removing the
wrinkles. (See fig. 10)
5. After a few seconds, remove
the steam diffuser from the
garment and smooth the garment
with your free hand and check to
see if more steam is required.
Note: Do NOT leave the steam
diffuser in one area for a long period of
time because the garment will get wet.
Fig. 10
Important: For heavier fabrics, you
may need to use repeated
applications. Avoid heating a single
area with steam for a prolonged
period. Check the garment to see
that the process is succeeding.
Step 4: Maintenance & Storage
1. Turn the unit “Off”. The power on
light (green) will go out. Disconnect
the plug from the electrical outlet.
2. Wait for garment steamer to cool
down completely for at least 30
minutes before draining the water
tank.
3. After the unit has cooled down,
remove the water tank and empty
the water remaining in the water
tank in a sink. Rinse the water
tank and set aside to dry.
4. Disconnect the steamer hose from
the unit and set aside.
5. Disconnect the garment rod
entirely from the unit.
6. Lift the unit over a sink and empty
what water has remained in the
water reservoir. Wash the interior
of the reservoir by flushing with
some tap water. This will dislodge
any sediment that has
accumulated. Drain this water
from the reservoir and dry.
7. Reattach the garment rod and
steamer hose or store separately.
8. Once the unit has dried, you may
store in a cool, dry place.
Important: If you wish to leave your
steamer ready for use on a daily
basis, simply leave the water bottle
filled and in place. While you do not
have to empty the water bottle each
day, you should periodically empty the
old water out of the steamer and
remove any sediment that has
accumulated. We recommend that
you empty and clean it once a month
depending on amount of use and
water mineral content in your area.
Safety Thermostat
Should your unit run out of water, the safety
thermostat will trip in order to prevent
damage to the unit. To reset, unplug unit,
refill water tank, re-plug unit into wall outlet
and depress On/Off switch. This will reset
the thermal protector circuit.
3
8
OPERATING INSTRUCTIONS cont.
GETTING TO KNOW YOUR GARMENT STEAMER
Preparing Garment
Steamer for Use
CAUTION: Before filling the water
tank, check to make sure that the water
tank sits securely in the unit before
proceeding.
Step 1: Preparing for Use
1. Unwind the power cord.
2. Check the wheels to see that they
swivel and roll properly.
3. Set the unit on the floor and remove
the water tank. Check for sediment or
build-up in the base of the unit reservoir
and water tank. Follow steps for
cleaning and storing the unit if water
was accidentally left in the water tank
during storage of the unit on page 8.
4. Place the steamer hose with the
nozzle end up on the garment
hook.(See fig. 7)
3. After filling the water bottle, close the
cap clockwise. (See fig. 8)
Fig. 8
4. Replace the water tank into the unit.
(See fig. 9)
Fig. 7
5. Make sure that the hose is and
unencumbered and that the unit rolls
freely.
Step 2: Filling the Water Bottle
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in this
appliance. Use tap water or
distilled/purified water if the tap water
in your area is very hard.
1. Always make sure that the
appliance is unplugged before filling
the water bottle.
2. To open the cap on the water bottle,
turn counterclockwise. Fill the water
bottle with tap water or
distilled/purified water if your tap
water in your are is very hard.
(See fig. 8)
Step 3: Using Garment Steamer
Note: It will make pressing easier if
there are few creases in the laundry
that needs pressing. To avoid excess
creasing, shake each item out before
placing in a drier or hanging to dry.
1. Always check that the On/Off
switch is in the “Off” position.
2. Plug appliance into electrical
outlet.
3. Push the “On/Off” switch to the
“On” position. The power “On”
light (green) will come on.
7
Fig. 9
1. Garment Hook
2. Garment Rod Extensions (3)
3. Water Tank
4. Power Cord
5. Wheels
6. Garment Brush
7. Steamer Head
8. Steam Diffuser/Handgrip
9. Steamer Hose
10. On/Off Switch
11. Power On Light (Green)
12. Front Caster Wheel
Technical Specifications
Voltage: 120V~ 60Hz.
Power: 1500 Watts
Water Capacity: 150 US Fl. Oz. (4.5 liters)
Max. Steam Temperature: 220°F
4
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS cont.
Components
Power “On” Light (green): This light
will illuminate when the “ON” switch is
depressed and the unit is turned on. It
will remain on until the unit is turned
“OFF” or until the water tank is emptied.
Caution: Always unplug before re-
filling.
Important: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in this
appliance. Use tap water or
distilled/purified water if the tap water
in your area is very hard.
Assembling Your Garment
Steamer
Step 1: Assembling Garment Rod
1. First attach the garment hook to
the garment rod by screwing the
garment hook (marked A) into the
garment rod extension (marked B).
(See fig. 1)
2. To assemble the garment rod, insert
one of the extensions into the other by
depressing the button on the extension
(marked C) so that you can insert into
the other extension (marked D). Turn
the extension until the button comes
out of the opening and you hear a
click. Repeat procedure for the other
extension. (See fig. 2)
Fig. 2
3. Once you have assembled the
garment rod, insert the bottom section
of the rod (marked E) into the adapter
hole in the upper housing of the unit
(marked F) and turn 90° until it is
locked in place. (See fig. 3)
Step 2: Assembling Steamer Hose
1. Insert end of steamer hose with the
long tube bushing (marked A) into
the adapter hole (marked B) on the
unit. Rotate hose 90° to lock in place.
(See fig. 4)
Fig. 4
2. To attach the steam diffuser, grasp
steam diffuser in one hand and the hose
in the other. Depress the locking button
on the hose end until the locking button
engages the hole in the steam diffuser.
A slight rotation of the steam diffuser
may help engage the locking button.
(See fig. 5)
3. To attach the garment brush
(marked E) onto the diffuser
(marked F), place the two hinges
at the back of the garment brush
(see fig. 6) into the two open tabs
that are at the back of the steam
diffuser. Swing the garment brush
up against the bottom of the steam
diffuser until the locking tab engages.
Fig. 6
Fig. 1
Fig. 3
Fig. 5
5
6
Loading...