Euro-Pro EP76 User Manual

Changing the Micro-Exhaust Filter

1. Open the lid.

2. Remove the used micro-exhaust filter.

3. Insert a new micro-exhaust filter.

4. Close the lid.

Motor Thermostat

Bagless Shark

Compact Canister Vacuum

Model EP76

Changing the filters

IMPORTANT: This motor is equipped with a heat sensitive thermostat. If

for some reason the vacuum cleaner will overheat, it will
then stop working automatically. When the motor will cool
off, the unit will restart by itself.

Changing and Cleaning the Filter

• Filter should be cleaned at least twice a year or when it becomes visible solid.

• Always operate the cleaner with the filter installed.

• Disconnect from electrical outlet before cleaning the filter.

• Do not use a washing machine to rinse the filter.

• Do not use a hair dryer to dry it.

4

U.S.: 94 Main Mill Street, Door 16 Canada: 4400 Bois-Franc

EURO-PRO Operating LLC

Plattsburgh, NY 12901 St-Laurent, QC H4S 1A7

Tel. : [phone]

www.sharkcompany.com

Removing the Dust Cup Filter

1. Push the dust cup lock to
open the dust cup.

1. Push the Power On/Off switch to disconnect the power.

2. Remove the flexible hose (see page 5).

3. Push the dust cup lock and open the dust cup.

Dust Cup Filter

4. Pull up the dust cup filter and shake down and
up. Take the dust cup filter out of the dust
cup, do not let the dust fall out.

5. Take out the dust cup and dispose of the dust

Dust Cup

inside.

Caution:

If the dust is tightly packed and difficult to
remove, lightly tap the front cover.

6. Insert the dust cup filter into the dust cup.

2. Remove the filter from the
grill-filter.

3. Rinse filter in lukewarm
water and dry the
filter completely.

4. Put the filter into the grill-filter.

5. A severely solid or clogged filter
should be thoroughly washed
with fresh tepid water. A mild
detergent can be used if
required.

NOTE: Before using the appliance, unwind a sufficient length of cable and

Insert the plug into the wall socket. A yellow mark on the power
cord shows the ideal cable length. Don’t pull the power cord
beyond the red mark.

7. Attach the dust cup to the vacuum by pressing
together until it is locked.

8. Reassemble the unit.

1

1. Insert the power plug into the wall outlet.

2. Press the Power On/Off Switch to
activate the vacuum cleaner.

3. To rewind the power cord, press the
cable rewind button with one hand and
guide the power cord with the other
hand to ensure that it does not whip
causing damage.

2