European Touch Rinato SPA Service Manual

Document ID: 30080002 Rev: C Technical Support: 800-626-6912 Page 1 of 16

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS............................................................................................... 3

DANGER...................................................................................................................................... 3

WARNINGS.................................................................................................................................. 3

IMPORTANT REQUIREMENTS ......................................................................................................... 4

SPECIFICATIONS SUMMARY .......................................................................................................... 4

LOCATION AND SUPPORT ............................................................................................................. 4

LOCATION DIMENSIONS ................................................................................................................ 5

ATTACHING THE SEAT BACK AND SEAT BOTTOM CUSHION............................................................. 6

SEAT BACK ATTACHMENT .............................................................................................................6

SEAT MOVEMENT ATTACHMENT.....................................................................................................6

SEAT BOTTOM ATTACHMENT.........................................................................................................6

REMOVING THE SHELLS................................................................................................................ 7

INSTALLING THE FLOOR MOUNTING BRACKETS .............................................................................. 7

REMOVING AND REPLACING DRAIN KNOB...................................................................................... 7

REMOVING AND REPLACING IMPELLER .......................................................................................... 8

WIRED SOUND OPTION................................................................................................................. 8

EPLACEMENT PARTS.................................................................................................................. 9

R

FULL ASSEMBLY...........................................................................................................................9

FULL ASSEMBLY.........................................................................................................................10

Basin Assembly......................................................................................................................11

P

OWER DRAIN PUMP ASSEMBLY..................................................................................................12

INLET COVER & RELATED PARTS.................................................................................................12

OTOR ASSEMBLY .....................................................................................................................13

M

SEAT MOVEMENT........................................................................................................................13

DRAIN ASSEMBLY.......................................................................................................................14

H

IGH CAPACITY PUMP ASSEMBLY................................................................................................14

GENERAL TROUBLE SHOOTING GUIDE ........................................................................................ 15

Document ID: 30080002 Rev: C Technical Support: 800-626-6912 Page 2 of 16

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the
following:

Read all instructions before using this appliance.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1) Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.

2) Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water.

3) Never drop or insert any object into any opening.

4) Do not use outdoors.

5) Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.

Save These Instructions

DANGER

1) Never use pins or other metallic fasteners with this appliance.

2) Carefully examine the covering before each use.

3) Discard the appliance if the covering shows any sign of deterioration, such as checking,
blistering, or cracking.

4) Keep electrical components dry – Do not operate in a wet or moist Environment.

WARNINGS

1) Excessive water temperature is dangerous and should be checked before use.
Maximum operating water temperature should not exceed 105
maximum supply water temperature should not exceed 150° F (65° C).

2) The spa has a heated surface in the seat bottom. Persons sensitive to heat must be
careful when using the spa.

3) Always enter and exit the pedicure spa slowly and carefully.

4) Never bring or operate any electrical devices into or near the pedicure spa.

5) This pedicure spa has a weight capacity of 350 pounds.

6) Do Not Crush – Avoid sharp folds.

7) Do not stand on or in appliance.

8) Use only while seated.

9) Keep children away from extended foot support.

10) Connect this appliance to a properly grounded outlet only. See Grounding Instructions

within the install manual.

Note: Always verify maximum temperatures with your local & state codes.

°

F (41° C) and the

Document ID: 30080002 Rev: C Technical Support: 800-626-6912 Page 3 of 16

IMPORTANT REQUIREMENTS

EUROPEAN TOUCH requires that you contact your local, licensed plumber and licensed
electrician to install your new pedicure spa. Installation must be in compliance with all your
local and state building codes. Your pedicure spa cannot operate efficiently or safely unless it
is provided with adequate electrical power, sufficient water pressure, proper water
temperature, and required drainage capabilities. Contact your local building inspector for
information and local code compliance procedures that need to be followed when having your
pedicure spa installed. Subsequent inspections and approvals that may be required are the
responsibility of the purchaser. (See limited warranty regarding incidental or

consequential exclusions – page 2).

SPECIFICATIONS SUMMARY

Note: Failure to comply with federal, state or local codes and ordinances will result in warranty

WARNING: Shells & front plate MUST be removed prior to moving the Rinato Spa.

being null and void.

Spa shipping configuration removal Spa appearance prior to moving into place

LOCATION AND SUPPORT

Select a level location. The floor structure beneath the pedicure spa must be capable of
supporting the occupied pedicure spa. For the seat back to fully recline, the pedicure spa base
must be mounted 17 inches from the wall as shown below:

Document ID: 30080002 Rev: C Technical Support: 800-626-6912 Page 4 of 16

LOCATION DIMENSIONS

Document ID: 30080002 Rev: C Technical Support: 800-626-6912 Page 5 of 16