EuropAce EGS 316C Instruction Manual
Garment Steamer
EGS 316C
Instruction Manual
Thank you for purchasing EuropAce Garment Steamer.
For safety purpose, please read this operating instruction manual carefully before using
and keep it for future reference.
2
IMPORTANT SAFEGUARDS
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN
ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED, INCLUDING THE FOLLOWING:
WARNING - TO REDUCE THE RISK OF BURNS,
ELECTROCUTION, FIRE OR INJURY TO PERSONS:
Read all instructions before using.
To reduce the risk of contact with hot water emitting from steam vents, check appliance
before each use by holding it away from your body and operating unit.
Use appliance only for its intended use.
To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
Never pull cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away.
Loop cord loosely around appliance when storing.
Always disconnect appliance from electrical outlet when lling with water or emptying, and
when not in use.
Care should be taken when using the appliance due to the emission of steam.
Do not operate appliance with a damaged cord, or if the appliance has been dropped or
damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair the
appliance.
Return to Service Center for examination and repair. Incorrect reassembly or repair
could cause a risk of re, electric shock, or injury to persons when the appliance is used.
Close supervision is necessary for any appliance being used by or near children. Do not
leave appliance unattended while plugged in.
Never steam a garment while it is being worn.
Burns could occur from touching hot metal parts, hot water, or steam. Use care when you
turn a steam appliance upside down – there may be hot water in the reservoir.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Let the unit cool for at least 30 minutes before pouring water out of the reservoir.
3
• Never drop or insert any object into any opening or hose.
• Do not use outdoors or operate where aerosol (spray) products are being used or where
oxygen is being administered.
• Surfaces of this appliance may be hot when in use. Do not let eyes or bare skin touch heated
surfaces.
• Do not place the steam nozzle directly on any surface or on the appliance power cord while it
is hot or plugged in. Use the stand provided.
• Always keep the hose and nozzle elevated above the water container.
• To reduce likelihood of circuit overload, do not operate another high wattage appliance on
the same circuit.
• Do not use an extension cord to operate the appliance. If an extension cord is absolutely
necessary, a 15 ampere rated cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that the cord cannot be pulled or
tripped over.
• Never pour water directly into reservoir. Pour water in water tank only.
• When changing attachments, please be sure the unit is o and no steam is being released to
avoid contact with hot water.
• Use caution when changing attachments as they may contain hot
water from condensation.
Ensure the attachments are dry or cooled o to avoid contact with hot water.
• The appliance is not intended for use by young children or inrm persons without
supervision.
• Young children should be supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTIONS
4
Perfect Steam Features
• Safe for use on all types of fabrics
• Quick heat-up feature emits steam in 45 seconds
• Convenient integrated garment hanger
• Telescoping design for compact storage
• 1.5m exible hose with Safe Touch hose cover for safe and
comfortable handling
• Easy-ll water tank provides 40 minutes of continuous steam
• Rolling casters for excellent mobility
• Low water auto shut-o for safe use
Assembly Instructions
1 Carefully remove all contents from packaging and inspect the
product to make sure all components have been received
(Fig. 9).
2. Insert pole into top of unit. Match the grooves on the pole with the
notches in the pole connector and push down. Securely tighten
the nut on the pole over the connector by turning it clockwise
(Fig. 1).
3. To attach the hanger attachment, align tabs in hanger attachment
with grooves on pole and push down (Fig. 2).
4. Fully extend the telescopic pole. To do so, open the 3 clips on the
pole and pull the pole upwards (Fig. 2). When fully extended close
the clips. Make sure that the pole is securely locked into place
and cannot be pushed downward.
5. Attach the fabric brush to the nozzle
by setting into place (Fig. 3).
6. Attach handle & hose assembly to unit. Line up the nut on the
hose with the screw on the hose connector. Turn nut clockwise
until it is securely tightened on the hose connector, (Fig. 4). It
should be tightly screwed into place. Then you may hang the
steamer handle onto the hanger attachment (Fig. 3).
NOTE: Do not hang the hose on the hanger attachment until after
it has been connected to the base to prevent the hose from falling
on you.
7. Attach the crease clamp (Fig. 5) onto the nozzle tab and gently
push into place.
Pole
Turn
Turn
Nozzle
Tab
Crease
Clamp
Fabric
Brush
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Clips
Hanger
Attachment
Loading...