Observe the following items in order to prevent from injuring yourself, others and the
damage of property:
!
Warning
!
Caution
Please observe following contents of graphics.
!
Please do not disassemble
and assemble respectively
the machine without
authorization.
This graphic represents[cause attention],and detailed cautions
will be displayed inside the graphic.
This graphic represents[operation prohibited], and detailed prohibitive
items will be displayed inside the graphic.
This graphic represents [forcible execution], and detailed forcible
!
execution items will be displayed inside the graphic.
This indicates serious injury or death to human being
may be caused.
This will remind you that injury to people and damage
to property may occur.
Please do not insert your hand
and take out clothes inside the
wash bowl before
it is fully stopped.
No dismantling
Please do not install the machine in
excessive wet or rainy areas to avoid
electric shocking, catching fire, faults
and distortion
accidents.
No excessive
wet areas
1
No touching
Please do not directly rinse the
machine with water when
cleaning.
No rinsing
2
!
Please do not let children climb onto
the machine or peer into it during the
spin cycle as an injury may occur.
Warning
It is prohibited to wash the clothes that have
come into contact with kerosene, gasoline,
alcohol and other flammable materials.
Please use correct power source.
Please do not pull out or insert the
plug with wet hands to avoid electric
shocking.
Prohibited
Please do not use the machine if there
is damage to the power cord or plug to
avoid electric shocks, short circuit of
chance of a fire.
Prohibited
Please pull out plug from the socket if the
machine is not in use.
Never pull the plug out by the power lead,
only by the plug.
Pull out the plug
Prohibited
Regularly clean the power plug to
remove dust and dirt to avoid contact
failure.
!
Ensure machine is only plugged into a
power point that is earthed correctly to
avoid possible accidents or injury.
(earthing)
Earthing
!
!
Please ensure that the water inlet hose
is connected and the tap is opened
before washing
clothes.
!
Damage to the power cord or plug
should only be replaced by a
qualified person.
Prohibited
Wet hands are
prohibited
Caution
The water temperature shall not exceed
50℃ when washing
with warm water.
Prohibited
It is strictly prohibited to place and sit
children or lay
weights on the
washer.
Prohibited
Please insert the power plug tightly.
!
Do not place burning candles,
mosquito-repellent incense, cigarette
and other flammable items on the
washer. No other heating
sources such as an
electric stove, air heating
fan etc. should be
placed on on
near the machine.
Smoke and fire prohibited
3
Please do not pull the electric cord
when pulling out the
plug.
!
Please do not wash down jacket,
raincoat, fishing coat and similar
clothes in the
washer.
Prohibited
4
Installation Installation
Remove from the packaging
· Remove package and take out the bottom board of
the cabinet from the foam cushion.
·
Open the lid of the washer to take out accessories.
·
Operation or washing on the foamed cushion is
strictly forbidden.
Installation of the water inlet hose
Fast en on e end of th e inl et hose t o the t ap
(the re is a r ubber s eal ing was her i nsi de)
Base foamed cushion
Tightly screw the other end of the inlet hose on the
water inlet valve . (with rubber sealing ring inside).
Note: When tightening the clamping nut, evenly apply the
force and do not twist the valve in case breaking
the valve joint.
Installation of the drain hose if not fitted
5
· Completely slide the drain
hose over the sewer.
· Fix it with the hoop.
( As shown in the figure )
Water inlet hose
Clamping nut
6
Preparation before washing Parts identification
Adjust the feet to level the machine
1
Adjustable foot (extend when
turning clockwise and shorten
when turning anti clockwise )
(Slightly tilt the machine. Adjust the foot knob
to ensure four corners of the machine are steadily
contacted with the ground. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Connect to the
3
power source.
Fix the drain
5
hose.
Upper drain
Install the water
2
inlet hose.
one inlet hose
two inlet hoses
6
Put in
clothes
and
suitable
amount of
washing
powder.
Upper drain hose
(for upper drain only)
Control panel
Lid
Wash Spin barrel
Agitator
Cabinet
Water inlet valve
Power cord
Washing powder box
Handle
Adjustable foot knob
4
NOTICE
Open the
water tap.
Before washing, please do take out coins,
keys and other hard objects, and close
!
the zip to prevent clothes and
barrel from damage.
Note:
The water
will overflow
when the height
of the drain hose
is under 750mm
the flow will decrease
when over 1200mm.
7
750~1200mm
Notice: If the power line damaged, please call maintenance or serviceman of other similar dept. to
change.
Accessories
Inlet hose
Upper drain hose
8
Theoperationpanel
Water Level Selection
This machine has nine water levels. Press the water level button
to select the corresponding water level.
WATER LEVEL
Trousers/Pants
Coats
Shirt
Towels
Sportswear
Depigment
Quilt
Quick
SPECIAL PROGRAMMES
WASH PROGRESS
WASH PROGRESS contains Long Soak, Medium Soak,
Light Soak, Agitating, Rinse and Spin.
DELICATE WASHINGREGULAR WASHING
Silk
Synthetic
Baby cloth
Underwear
Jeans
Normal
Heavy Duty
Extra Heavy Duty
TURBO CLEANING
Spin
Rinse
Agitating
WASH PROGRESS
Power Supply
[Power] button is used to
turn on/off the power supply.
End
Long
Soak
Medium
Soak
Light
Soak
WASH PROGRAMMES
Program Selection
Program divide into four washing mode: REGULAR WASHING, SPECIAL PROGRAMMES,
DELICATE WASHING and TURBO CLEANING.
REGULAR
SPECIAL contain four programs: SPORTSWEAR, DEPIGMENT, QUILT and QUICK.
DELICATE WASHING contain four programs: SILK, SYNTHETIC, BABY CLOTH and UNDERWEAR
TURBO CLEANING contain four programs: JEANS, NORMAL,HEAVY DUTY and EXTRA .
WASHING contain four programs: TROUSERS / PANTS, COATS, SHIRT and TOWELS.
PROGRAMMES
HEAVY DUTY
9
Start / Pause
Press the [Start / Pause] button will switch the
machine between start and pause modes.
10
Quick start
1 Install the washing
machine
The washing progress
press the Wash Progress button to choose the proper washing progr ess:
9 Press the
[start/pause] key
2 Load the laundry
3 Add the detergent
4 Close the lid
8 Select the desired
programme
7 Connect the power
6 Turn on the water tap
5 Fix the drain pipe
Programme selection
Press th e [POWER] but ton.
1
Select t he programme, then select the wat er level or oth er attached functions.
2
Press th e [start/pa use] key.
3
When the programme has finished
When the m achine stops, the buzzer will buz z continuou sly for 6 times and
the powe r will be automatically cut off.
Turn off th e water tap.
Pull out the power plug for safety.
Wash Progress indicator
Long
Soak
SO A K
Medium
Soak
Medium
Soak
Light
Soak
Light
Soak
Light
Soak
Agitating
Agitating
Agitating
Agitating
Wash Progress
Rinse
Rinse
Rinse
Rinse
Rinse
Spin
Spin
Spin
Spin
Spin
Spin
Note: “ ” on ,“ ” off
!
NOTICE
! Close the lid before star the machine, otherwise, it will stop automatically
during spin process and alarm.
! The machine will not work when the filled water does not reach the defined lever.
! After turn on the [Power], if the [Start / Pause ] button is not pressed,
the power will be automatically cut off after 10 minutes.
11
12
Special features
Puide rogramme g
TROUSERS / PANTS
This pro gram is used to wash tro users and pants.
COATS
This pro gram is used to wash coa ts.
SHIRT
This pro gram is used to wash shi rts, in shorter peri od and gently.
TOWELS
This pro gram is used to wash tow els.
SPORTSWEARS
This pro gram is used to wash spo rtwear with little s oaking.
DEPIGMENT
Wash with cold wate r only to prevent depi gment.
QUILT
To wash quil t or thick cloths, the l ow water level is disa bled,the
flow strength is en f o r c e d , the dynamic soakage i s added,and
the wash ing time is extended .
QUICK
To wash ligh t dirty cloths with on ly one rinsing cycle .
EXTRA HEAVY DUTY
Simila r to ‘quilt’, wash wit h strong flow, dynami c soakage,
and exte nded washing time.
HEAVY DUTY
To wash heav y dirty cloths with th ree rinsing cycles .
NORMAL
To wash clot hs contaminated by h eavy oil, with short s oakage and
extend ed washing time.
JEANS
Simila r to ‘standard’, wit h 2 rinsing, and short s oakages.
UNDERWEAR
The high w ater level and hot wat er are disabled; was h gently in
shorte r period and more cycl es (default as 2).
BABY CLOTH
The high w ater level and hot wat er are disabled; sim ilar to ‘standard ’ washing w ith 3 rinsing cycles .
SYNTHE TIC
To wash synt hetic fibers, the hi gh water level and hot w ater are
disabl ed.
SILK
The silk i s washed gently with 2 r insing; the high wat er level and
hot wate r are disabled.
defaul t
rinse
agitat ing
soak
light
soak
medium
soak
long
level
water
level
water
Program
2
(TIM ES)
9
15
12
(MIN )(MIN )(MIN )(MIN )
918
8
6
1-9
shirt
coats
trousers /pants
REGULAR
WASHING
12
5
4
715
1-6
synthetic
silk
towels
DELICATE
3
8
10
4
3
underwear
baby cloth
WASHING
2
15
10
6
jeans
3
1018
101020
7
6
heavy duty
normal
TURBO
CLEANING
2
1018
6
810101020
1-9
sportswear
extr a he avy dut y
1
9
12
15
10
10
7
8
4
1-6
4-9
depigment
quick
quilt
SPECIAL
PROGRAMMES
Note: The time required will also vary with the water pressures , different clothes
textures and different water drain conditions.
13
14
Cleaning and Maintenance
Make sure that the power plug is disconnected before the cleaning and maintenance.
·
NOTICE
!
Cleaning the water inlet hose joint
·
Please keep the machine clean and perform correct
maintenance to prolong its service life of washer.
trouble shooting
If the machine does not work normally, or alarms, please check as the following list.
If the problem persists, please contact local service office or the sales service
department of our company. The customer should not dismantle the machine without
permission.
List of faults and inspection
Unscrew and remove the water inlet hose joint from the washer and clean the screen of the
inlet valve with brush.
Faults
No water
flows in
No
washing
Abnormal
draining
Inspection Items
If the power is off or the fuse is burned out.
·
If the water supply is cut off or the water pressure is too low.
·
If the inlet hose is properly connected and the water tap is opened.
·
If the screen of the inlet valve is blocked by dirt.
·
·
If the inlet valve works. (when the inlet valve is switched on, a slight
sound will be heard)
If the [Start / Pause]button is pressed after the power
·
switch is pressed.
If the power is off or the fuse is burned out.
·
If the power supply voltage is too low.
·
If the water reaches to the required water level.
·
(The machine will not work before reaching the required water level)
If it is set to "Delay" washing mode. (It will only start upon the
·
reservation time)
·
If the water drain hose is placed too high.
·
If the end of water drain hose is blocked.
·
If the internal rubber ring of the drain valve is blocked by dirt.
15
If the lid is closed.
·
If clothing piled up at one side of the barrel or the clothing
Abnormal
spin
·
put in is beyond the rated capacity.
If the machine is placed unsteadily . (The ground is not flat).
·
If the motor belt is loose.
·
Note: During the de spin process, if cloth are piled at one side of the barrel, it will stop
because of unbalance. The user of the machine will detect this and try to correct it
by adding water.
If the unbalance situation can not be solved after three try ,the use will be asked
to replace the clothes manually.
16
Trouble shooting
The following is a list of the fault indications and the alarms:
Technical specifications
Display
Causes
Alarm if water fi ling
or making up last
over 1 hour.
Alarm for draining
time out.
Alarm for unbalance
during spin.
Alarm for communications problem.
Alarm for water level
sensor problem.
Alarm for door lock
problem.
l
Solutions
Check the water
tap is opened or
not.
Check if the drain
hose is placed
correctly.
Please keep the
clothes balance.
Repair
Repair
Repair
Remar k: double pres s [Start/ Pause]
to stop t he al arm from th e locker
and res ume the normal s tate.
Remar k: press [Star t/]
once to u nlock the lid; p ress
it agai n to stop the alar m and
resum e the operatio n.
Ple a se c a l l ou r s e rv i c e to
repai r it, if it fails to g et back
to the op erational st ate.
Pause
Rated power supply
Input power of motor
Rated washing capacity
Rated spin capacity
Overall dimensions
Application water pressure
Weight of the whole machine
Washing mode
Draining mode
Spin mode
240V~ 50Hz
680W
10.0kg
10.0kg
686 718 1023
X
X
0.03MPa~0.8MPa
65kg
Agitate
Upper drain
Centrifugal spin
17
18
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.