1. Important instructions for safety and environment
1.1 General Safety Pg 5
1.1.1 Electricity SafetyPg 6
1.1.2 Product Safety Pg 7
1.2 Mounting over a washing machine Pg 10
1.3 Intended use Pg 11
1.4 Child safety Pg 11
1.5 Compliance with the WEEE regulation & disposing of the waste product Pg 12
1.6 Compliance with RoHS Directive: Pg 12
1.7 Package information Pg 12
1.8 Technical specifications Pg 13
PG 5
2. Your DryerPG 14
2.1Overview Pg 14
3. InstallationPG 15
3.1Appropriate installation location Pg 15
3.2Removing the transportation safety assembly Pg 15
3.3Connecting the water drain hose for models with the water tank at the bottom Pg 15
3.4Adjusting the feet Pg 16
3.5Transportation of the dryer Pg 16
3.6Changing the illumination lamp Pg 16
4. Preperation PG 17
4.1 Laundry suitable for drying in the dryer Pg 17
4.2 Laundry not suitable for dying in the dryer Pg 17
4.3 Preparing laundry for drying Pg 17
4.4 Things to be done for energy saving Pg 17
4.5 Correct load capacity Pg 17
5. Operating the product PG 19
5.1 Control panel Pg 19
5.2 Symbols Pg 19
5.3 Preparation of Dryer Pg 19
5.4 Programme selection and consumption table Pg 20
5.5 Auxiliary functions Pg 22
5.6 Warning indicators Pg 22
5.7 Starting the program Pg 22
5.8 Child lock Pg 22
5.9 Changing the program after it is started Pg 23
5.10 Cancelling the program Pg 23
5.11 End of program Pg 24
6. Maintenance and cleaningPG 25
6.1 Unit filter / loading door inner surface Pg 25
6.2 Cleaning the sensors Pg 25
6.3 Draining the water tank Pg 26
6.4 For the condenser Pg 26
7. TroubleshootingPG 28
8. Manufacturer Guarantee PG 30
ECD700W 7KG Condenser Dryer
Page 3
Please read this user manual first!
Dear Customer,
Thank you for prefering a Euromaid product. We hope that your product which has been
manufactured with high quality and technology will give you the best results. We advise you
to read through this manual and the other accompanying documentation carefully before
using your product and keep it for future reference. If you transfer the product to someone
else, give its manual as well. Pay attention to all details and warnings specified in the user
manual and follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Read the instructions.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful hints about usage.
C
Warning for hazardous situations with regard to life and property.
A
Warning against electric shock.
B
Warning against hot surfaces.
Warning against fire hazard.
Warning against scalding hazard.
Packaging materials of the product are manufactured from recyclable materials in
accordance with our National Environment Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard
them to the dedicated collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
Page 4 ECD700W 7KG Condenser Dryer
1 Important instructions for safety and
environment
This section contains safety instructions that will help
protect from risk of personal injury or property damage.
Failure to follow these instructions shall void any warranty.
1.1 General safety
•This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be kept away unless continously
supervised.
• Adjustable feet should not be removed. The gap between
the dryer and the floor should not be reduced with
materials such as carpet, wood and tape. This will cause
problems with the dryer.
• Always have the installation and repairing procedures
carried out by the Authorized Service. Manufacturer
shall not be held liable for damages that may arise from
procedures carried out by unauthorized persons.
• Never wash the dryer by spraying or pouring water onto
it!There is the risk of electric shock!
For the products with a steam function:
• Use only distilled water or water condensed in the water
tank of the machine in steam programs. Do not use mains
water or additives. When using condensed water in the
water tank, it should be filtered and cleared of fibres.
• Do not open the door when steam programs are running.
Hot water may be expelled.
ECD700W 7KG Condenser Dryer Page 5
Important instructions for safety and
risk of fire and electric shock.
environment
• Before putting laundry in a steam program, stains on it
should be removed.
• You may only put laundry that is not dirty or stained
but permeated with unpleasant odour in steam (odour
removal) program.
• Do not use any dry cleaning sets or additional materials in
a steam program or in any program.
1.1.1 Electrical safety
Electrical safety instructions should be followed
A
A
• Connect the dryer to a grounded outlet protected by a
• The voltage and allowed fuse protection is stated on the
• The voltage specified on the type label must be equal to
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation,
• Do not touch the plug with wet hands! Never unplug by
• Do not use extension cords, multi-plugs or adaptors to
while electrical connection is made during the
installation.
The appliance must not be supplied through an
external switching device, such as a timer,or
connected to a circuit that is regularly switched on
and off by utility.
fuse at the value specified on the type label. Have the
grounding installation performed by a qualified electrician.
Our company shall not be liable for any damages that
will arise when the dryer is used without grounding in
accordance with the local regulations.
type label plate.
your mains voltage.
maintenance, cleaning and repair works.
pulling on the cable, always pull out by grabbing the plug.
connect the dryer to power supply in order to decrease the
Page 6 ECD700W 7KG Condenser Dryer
Important instructions for safety and
environment
• Power cable plug must be easily accessible after
installation.
If the supply cord is damaged, it must be replaced by the
B
B
1.1.2 Product safety
manufacturer or an authorised service agent or similarly
qualified persons in order to avoid a hazard.
If the dryer is faulty, it must not be operated unless
it is repaired by an authorized service agent! There is
the risk of electric shock!
Superheating of the clothes inside of the dryer can
occur if you cancel the programme or in the event
of a power failure whilst the dryer is running, this
concentration of heat can cause self-combustion and
fire so always activate the ventilation programme
to cool down or quickly remove all laundry from the
dryer in order to hang them up and dissipate the
heat.
Points to be taken into consideration for fire
hazard:
Below specified laundry or items must not be dried in
the dryer considering fire hazard.
• Unwashed laundry items
• Items soiled with oil, acetone, alcohol, fuel oil,
kerosene, stain removers, turpentine, paraffin or
paraffin removers must be washed in hot water
with plenty of detergent before being dried in the
dryer.
For this reason especially the items containing the
above specified stains must be washed very well, to
do this use adequate detergent and choose a high
washing temperature.
ECD700W 7KG Condenser Dryer Page 7
Important instructions for safety and
environment
Below specified laundry or items must not be
dried in the dryer due to the fire hazard:
• Garments or pillows bolstered with rubber foam
(latex foam), shower bonnets, water resistant
textiles, materials with rubber reinforcement and
rubber foam pads.
• Clothing cleaned with industrial chemicals.
Items such as lighter, match, coins, metal parts,
needle etc. may damage the drum set or may lead to
functional problems. Therefore check all the laundry
that you will load into your dryer.
Never stop your dryer before the programme
completes. If you must do this, remove all laundry
quickly and lay them out to dissipate the heat.
Clothes that are washed inadequately may ignite on
their own and even may ignite after drying ends.
Oil-affected items can ignite spontaneously,
especially when exposed to heat sources such as in
a tumble dryer. The items become warm, causing an
oxidation reaction in the oil. Oxidation creates heat.
If the heat cannot escape, the items can become hot
enough to catch fire. Piling, stacking or storing oilaffected items can prevent heat from escaping and
so create a fire hazard.
If it is unavoidable that fabrics that contain vegetable
or cooking oil or have been contaminated by hair care
products be placed in a tumble dryer they should first
be washed in hot water with extra detergent - this
will reduce, but not eliminate, the hazard.
• You must provide enough ventilation in order to prevent
gases exiting from devices operating with other types of
fuels including the naked flame from accumulating in the
room due to the back fire effect.
Page 8 ECD700W 7KG Condenser Dryer
Important instructions for safety and
environment
Underwear that contains metal reinforcements
A
C
C
• Never attempt to repair the dryer by yourself. Do not
perform any repair or replacement procedures on the
product even if you know or have the ability to perform
the required procedure unless it is clearly suggested in the
operating instructions or the published service manual.
Otherwise, you will be putting your life and others’ lives in
danger.
• There must not be a lockable, sliding or hinged door that
may block the opening of the loading door in the place
where your dryer is to be installed.
• Install your dryer at places suitable for home use.
(Bathroom, closed balcony, garage etc.)
• Make sure that pets do not enter the dryer. Check the
inside of the dryer before operating it.
• Do not lean on the loading door of your dryer when it is
open, otherwise it may fall over.
• The lint must not be allowed to accumulate around the
tumble dryer
• The tumble dryer is not to be used if industrial chemicals
have been used for cleaning.
• Fabric softeners, or similar products.should be used as
specified by the fabric softener instructions.
should not be dried in the dryer. Dryer may be
damaged if metal reinforcements come loose and
break off during drying.
Use softeners and similar products in accordance
with the instructions of their manufacturers.
Always clean the lint filter before or after each
loading. Never operate the dryer without the lint
filter installed.
ECD700W 7KG Condenser Dryer Page 9
Important instructions for safety and
environment
• Exhaust air must not be discharged into a flue which is
used for exhausting fumes from appliances burning gas or
other fuels.
• The final step of the drying cycle (cool-down cycle) occurs
without applying heat to ensure that the items are left at a
temperature that will not damage them.
1.2 Mounting over a washing machine
• A fixing device should be used between the two machines
when installing the dryer above a washing machine. The
fitting device must be installed by the authorized service
agent.
• Total weight of the washing machine and the dryer -with
full load- when they are placed on top of each other
reaches to approx. 180 kilograms. Place the products on a
solid floor that has sufficient load carrying capacity!
Washing machine cannot be placed on the dryer.
A
Pay attention to the above warnings during the
installation on your washing machine.
Installation Table for Washing Machine and Dryer
Dryer
Depth
54 cm
60 cm
Page 10 ECD700W 7KG Condenser Dryer
62 cm 60 cm 54 cm 50 cm 49 cm 45 cm40 cm
Washing Machine Depth
Can be installed
Can be installed
Can be
installed
Cannot be
installed
Cannot be
installed
Important instructions for safety and
environment
1.3 Intended use
• Dryer has been designed for domestic use. It is not suitable
for commercial use and it must not be used out of its
intended use.
• Use the dryer only for drying laundry that are marked
accordingly.
• The manufacturer waives any responsibility arisen from
incorrect usage or transportation.
1.4 Child safety
• Packaging materials are dangerous for the children. Keep
packaging materials away from children.
• Electrical products are dangerous for the children. Keep
children away from the product when it is operating. Do
not let them tamper with the dryer. Use the child-proof
lock in order to prevent the children to tamper with the
dryer.
Child-proof lock is on the control panel.
C
• Keep loading door closed even when the dryer is not in
use.
(See Child lock)
ECD700W 7KG Condenser Dryer Page 11
Important instructions for safety and
environment
1.5 Compliance with the WEEE regulation
and disposing of the waste product
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classification
symbol for waste electrical and electronic equipment
(WEEE).
This product has been manufactured with high
quality parts and materials which can be reused and are
suitable for recycling. Do not dispose of the waste product
with normal domestic and other wastes at the end of its
service life. Take it to the collection center for the recycling
of electrical and electronic equipment. Please consult your
local authorities to learn about these collection centers.
1.6 Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS
Directive (2011/65/EU). It does not contain harmful and
prohibited materials specified in the Directive.
1.7 Package information
Packaging materials of the product are manufactured
from recyclable materials in accordance with our National
Environment Regulations. Do not dispose of the packaging
materials together with the domestic or other wastes. Take
them to the packaging material collection points designated
by the local authorities.
Page 12 ECD700W 7KG Condenser Dryer
Important instructions for safety and
environment
1.8 Technical Specifications
EN
Height (Min. / Max.)84,6 cm / 86,6 cm*
Width59,5 cm
Depth54 cm
Capacity (max.)7 kg**
Net weight (± 4 kg)34 kg
Width
See type label***Voltage
Rated power input
* Min. height: Height with adjustable feet are closed.
Max. height: Height with adjustable feet are opened
maximum.
** Dry laundry weight before washing.
*** Type label is located behind the loading door.
C
C
C
Technical specifications of the dryer are subject to
specification without notice to improve the quality of
the product.
Figures in this manual are schematic and may not
match the product exactly.
Values stated on markers on the dryer or in the other
published documentation accompanying with the
dryer are obtained in laboratory in accordance with
the relevant standards. Depending on operational and
environmental conditions of the dryer, these values
may vary.
ECD700W 7KG Condenser Dryer Page 13
2 Your Dryer
2.1 Overview
11
9
8
7
10
1. Top panel
2. Control panel
3. Loading door
4. Kick plate opening button
5. Ventilation grids
1
6. Adjustable legs
7. Kick plate
2
8. Type label
9. Lint filter
10. Water tank (located inside kick plate)
3
11. Power cord
4
5
6
Page 14 ECD700W 7KG Condenser Dryer
3 Installation
Before the calling the nearest Authorized
Service for the installation of the dryer,
ensure that electrical installation and water
drain is appropriate referring to the user’s
manual. If they are not suitable, contact a
qualified electrician and technician to make
necessary arrangements.
Preparation of the dryer's location
C
A
3.1 Appropriate installation
location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated,
• The gap between the dryer and the
• Do not cover the ventilation grills of the
• There must not be a lockable, sliding or
• Once the dryer is installed, it should stay
• Place the dryer at least 1 cm away from
• Your dryer can be operated at
• The rear surface of the tumble dryer
as well as the electrical and
waste water installations is under
customer's responsibility.
Prior to installation, visually check
if the dryer has any defects on
it. If the drier is damaged, do
not have it installed. Damaged
products cause risks for your
safety.
dust-free environment.
surface should not be reduced by the
materials such as carpet, wood and tape.
dryer.
hinged door that may block the opening
of the loading door in the place where
your dryer is to be installed.
at the same place where its connections
have been made. When installing the
dryer, make sure that its rear wall does
not touch anywhere (tap, socket, etc.).
the edges of other furniture.
temperatures between +5°C and +35°C.
If the operating conditions fall outside
of this range, operation of the dryer
will be adversely affected and it can get
damaged.
shall be placed against a wall.
Do not place the dryer on the
B
power cable.
3.2 Removing the
transportation safety
assembly
Remove the transportation safety
A
assembly before using the dryer
for the first time.
3.3 Connecting the water
drain hose for models with the
water tank at the bottom;
Connection pipe to water drain is at the
bottom rear of your machine.
• 1. Remove the bracket and the rubber
cap.
• 2. Attach the drain hose and replace the
bracket to its position.
ECD700W 7KG Condenser Dryer Page 15
Installation
Important:
During full capacity usage, it is
C
C
C
C
3.4 Adjusting the feet
• Turn the feet to left or right until the
advised to use the machine with
direct drain connection, since the
machine may pause with flashing
water tank warning symbol.
Make sure that the discharge
hose is tight after it is connected
to the drain in order to obtain
a better water flow since the
machine is not equipped with a
pump. You can cut and shorten
the hose to adjust its length if
necessary.
The end of the hose should
never be higher than the level of
the water outlet on the machine.
Otherwise, the “tank full” light of
your machine will illuminate and
stop the programme.
If the dryer is mounted on the
washing machine by means
of a bracket, use of the water
drain hose is recommended. The
drain hose should be directed
downwards as shown in the
figure.
dryer stands level and firmly.
3.5 Transportation of the dryer
Drain all water that has remained in the dryer.
If direct water drain connection is made, then
remove the hose connections.
We recommend carrying the
dryer in upright position. If it is
A
not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
looked from the front.
3.6 Changing the illumination
lamp
In case an illumination lamp is used in your
laundry dryer.To change the Bulb/LED used
for illumination of your tumble dryer, call your
Authorized Service.The lamp(s) used in this
appliance is not suitable for household room
illumination. The intended purpose of this
lamp is to assist the user to place laundry
in the tumble dryer in a comfortable way.
The lamps used in this appliance have to
withstand extreme physical conditions such
as vibrations and temperatures above 50 °C
Page 16 ECD700W 7KG Condenser Dryer
4 Preparation
keep it open for a long time.
4.1 Laundry suitable for drying
in the dryer
Always obey the instructions given on the
garment tags. Dry only the laundry having a
label stating that they are suitable for drying
in a dryer and make sure that you select the
appropriate programme.
Do not dry with
dryer
4.2 Laundry not suitable for
drying in the dryer
C
4.3 Preparing laundry for
drying
• Laundry may be tangled with each other
after washing. Separate the laundry
items before placing them into the dryer.
• Dry garments having metal accessories
such as zippers, inside out.
• Fasten the zippers, hooks and buckles
and button sheets.
4.4 Things to be done for
energy saving
• Spin your laundry at the highest speed
possible when washing them. Thus, the
drying time is shortened and energy
consumption is reduced.
• Sort out the laundry depending on their
type and thickness. Dry the same type
of laundry together. For example thin
kitchen towels and tableclothes dries
earlier than thick bathroom towels.
• Follow the instructions in the user
manual for programme selection.
• Do not open the loading door of the
machine during drying unless necessary.
If you must open the loading door, do not
At high
temperature
Delicate embroidered fabrics,
woollen, silk garments, delicate
and valuable fabrics, airtight
items and tulle curtains are not
suitable for machine drying.
At medium
temperature
At low
temperature
• Do not add wet laundry while the dryer is
in operation
• For models with a condenser unit: clean
the condenser once in a month or after
every 30 operations regularly. .
• For models with heat pump unit: clean
the filter drawer periodically when there
is a visible accumulation of fluff or when
the filter drawer cleaning indicator «
» lights up.
• For models with flue unit: comply with
the flue connection instructions and
clean the flue.
• During the drying process, air the
room well where your tumble dryer is
operating.
4.5 Correct load capacity
Follow the instructions in the “Programme
selection and consumption table”. Do not
load more than the capacity values stated in
the table.
ECD700W 7KG Condenser Dryer Page 17
Preparation
Following weights are given as examples.
Laundry
Cotton quilt covers
(double)
Cotton quilt covers
(single)
Bed sheets (double)500
Bed sheets (single)350
Large tablecloths700
Small tablecloths250
Tea napkins100
Bath towels700
Hand towels350
Blouses150
Cotton shirts300
Shirts250
Cotton dresses500
Dresses350
Jeans700
Handkerchiefs (10
pieces)
T-Shirts125
*Dry laundry weight before washing.
Approximate
weights (g)*
1500
1000
100
Page 18 ECD700W 7KG Condenser Dryer
5 Operating the product
2
34
5.1 Control Panel
1
5.2 Symbols
Cleaning the
Tank
full
End/anti-
creasing
Filter
cleaning
On/O
lter drawer /
Condenser
Timer
Delay
Child-proof
lock
Dryness
Level
Mute
Cupboard
Dry
Volume up
Iron Dry
Express
14’
Jeans
1. On/Off/Program selection
button
2. Start/Pause button
3. Delay Start button
4. Alarm button
Delicates
BabyProtect
Shirts
Extra dry
Sport
Cupboard
dry plus
Freshen Up
pause
cancel
Start
Cottons
Synthetics
Mix
Drying Rack/
TimeDry
Daily
Express
30’
5.3 Preparation of Dryer
•Plug the dryer in.
•Open the loading door.
•Place the laundry in the dryer without
jamming them.
•Push and close the loading door.
Ensure that no laundry is jammed
A
to the loading door.
Select the desired program using the On/
Off/Program selection knob, the machine will
turn on.
Selecting a program using the
C
On/Off/Program selection
button does not mean that the
program started. Press the
Start / Pause button to start
the program.
ECD700W 7KG Condenser Dryer Page 19
Operating the product
5.4 Programme selection and consumption table
EN
ProgrammesProgramme Description
Capacity (kg)
in washing
Spin speed
machine (rpm)
(minutes)
Drying Time
Cotton Iron Dry
Cotton Cupboard Dry
Cotton Cupboard
Dry +
Cotton Extra Dry
Synthetic Iron Dry
Synthetic Cupboard
Dry
Sport
Refresh
Time Programmes
Hygienic Care
Jeans
You may dry your cotton laundry to be ironed in
this programme to have them slightly damp for
ease ofironing. (Shirt, T-shirt, tablecloth, etc.)
You may dry all your cotton laundry in this
programme.(T-shirt, pants, pyjamas, baby
clothes, underwear,linen, etc.) You can put your
laundry in the
wardrobe without ironing.
You may use this programme for extra dryness
in thick laundry such as pants, tracksuit.
You can put your laundry in the wardrobe
without ironing.
You may dry your thick cotton laundry in this
programme such as towels, bathrobe, etc. You
can put
your laundry in the wardrobe without ironing.
You may dry your synthetic laundry to be ironed
in this programme to have them slightly damp
for ease of ironing. (Shirt, T-shirt, tablecloth,
etc.)
You may dry all your synthetic laundry in
this programme. (Shirt, T-shirt, underwear,
tablecloth, etc.) You can put your laundry in the
wardrobe without ironing.
You may dry your sports clothes that
are appropriate for tumble drying in this
programme.
It just provides airing for 10 minutes without any
hot air. You can air the cotton and linen laundry
that have been stored for a long time , and
eliminate the odour in them.
You may select from time programmes between
10 and 30 and 60 minutes to achieve the
desired drying level at low temperature. In this
programme, tumble drier’s operation lasts for
the settime independently from the dryness of
laundry.
Program used for baby clothing with can be
dried approval on the label.
You may dry denim pants, skirts, shirts or jackets
in this programme.
71000105
71000125
71000135
71000145
3,580040
3,580053
4100092
--10
---
3100080
4120090
Page 20 ECD700W 7KG Condenser Dryer
Operating the product
Delicates
Xpress 14
ProgrammesCapacity (kg)
Cotton Cupboard
Dry +
Dries delicate items in a more sensitive
manner, and causes less creasing and easier
ironing.
Dries shirts more delicately and thus causes less
wrinkles for easy ironing.
Energy consumption values
73102
260045
0,5120014
Energy consumption value
kWh per year
Energy rating
star
* : Energy Label standard program (AS/NZS 2442) “All the filters must be cleaned prior to test
series.”
All values given in the table have been fixed according to standard laboratory conditions.
These values may deviate from the table according to the laundry type, laundry spin speed,
environmental conditions and voltage fluctuations.
During the performance test, the direct drain hose must be connected.Please see section 3.3
* : Energy Label standard program (EN 61121:2012)All the values on the chart are identified according to EN 61121:2012 standard. Consumption values may vary from the values in the chart depending on laundry type, wringing speed, ambient conditions and voltage levels.
ECD700W 7KG Condenser Dryer Page 21
Operating the product
5.5 Auxiliary functions
Audible warning
The Dryer makes an audible warning when
the program is completed. If you don’t want
it to make an audible warning, press the
“Alarm” button. When you press the Alarm
button, a light will illuminate and no audible
warning will be made when the program
ends.
You can select this function
C
Delay Start
If you prefer to dry your laundry at a later
time, you can delay the start time of the
program up to 3 hours, 6 hours or 9 hours
using the Delay Start function.
Open the laundry door, place the laundry
inside and select the drying program.
Press the Delay Start selection button and
set the delay time you wish. When the Delay Start button is pressed once, 3 hours delay is
selected and the delay indicator will light up.
If you press the same button again, 6 hours
delay will be selected and when you press
for the third time, 9 hours delay will be
selected. If you press the Delay Start button
once again, the delay will be cancelled.
After the Delay Start selection is made, start
delayed running for the program selected
pressing the “Start/Pause” button.
C
Changing the Delay Time
If you want to change the duration during
the countdown:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the Delay Start
selection process.
Canceling the Delay Start function
If you want to cancel the end time
countdown and start the program
immediately:
before or after the program
starts.
You can add or remove laundry
within delay time. At the end of
the Time Delay countdown, the
Time Delay warning indicator
turns off and drying begins.
Cancel the program by turning the On/Off/
Program selection knob. Select the
program you want and press the Start/
Pause button.
5.6 Warning indicators
Warning indicators may vary
C
depending on the model of your
dryer.
Filter cleaning
When the program is completed, the warning
indicator for filter cleaning turns on.
Water tank
When the program is completed, the warning
indicator to empty the water tank turns on.
If the water tank fills up while the program
continues, the warning indicator starts
flashing and the machine goes into stand-by.
In this case, empty the water tank and start
the program by pressing the Start / Standby button. Warning indicator turns off and
program resumes.
5.7 Starting the program
Press the Start/Pause button to start the
program.
Drying indicator will light up, indicating that
the program has started.
5.8 Child Lock
The dryer has a child lock which prevents the
program flow from being interrupted when
the buttons are pressed during a program.
When the child lock is activated, all buttons
on the panel except the On/Off/Program
selection knob are deactivated.
Press the Delay Start and Alarm buttons
simultaneously for 3 seconds to activate the
child lock.
The child lock has to be deactivated to be
able to start a new program after the current
program is finished or to be able to interfere
with the program. To deactivate the child
lock, keep the same buttons pressed for 3
seconds.
Page 22 ECD700W 7KG Condenser Dryer
Operating the product
When the child lock is activated,
C
C
When the child lock is active:
When the Dryer runs, or in stand-by state,
the indicator symbols won’t change upon
changing the position of the program
selection knob.
C
the child lock warning indicator
on the screen turns on.
Child lock deactivates when the
Dryer is turned off and on by
the On/Off/Cancel knob.
When the dryer runs and the
child lock is active, it beeps twice
when the program selection knob
is turned. If the child lock is
deactivated without returning
the program selection knob to its
previous position, program will
terminate due to the change in
the program selection knob
position
5.9 Changing the program after
it is started
You can change the program you selected to
dry your laundry with a different program
after the Dryer starts running
•For instance, select Extra Dry program
by turning the On/Off/Program
selection knob to select Extra Dry
instead of Iron Dry.
•Press the Start/Pause button to start
the program.
Adding and removing clothes during
stand-by
If you want to add or remove clothes to/
from the Dryer after the drying program
starts:
•Press the Start/Pause button to put the
Dryer in Stand-by state. The drying
operation stops.
•Open the loading door while in Stand-by
state, and close the door after you
remove or add laundry.
•Press the Start/Pause button to start
the program.
Adding laundry after the drying
C
C
C
operation starts may cause the
dried laundry inside the machine
to mix with wet laundry and
leave the laundry damp at the
end of operation.
Adding or removing laundry
during drying may be
repeated as many times as
you wish. But this operation
continuously interrupts the
drying operation, and thus
increases program duration and
energy consumption. So, it is
recommended to add laundry
before the program starts.
If a new program is selected by
turning the program selection
knob while the Dryer is in standby, the running program
terminates.
Do not touch the inner surface
of the drum while adding or
removing clothes during a
continuing program. The drum
surface is hot.
5.10 Cancelling the program
If you want to cancel the program and
terminate the drying operation for any
reason after the Dryer starts running,
turn the On/Off/Cancel knob, the
program will be cancelled.
The inside of the Dryer
A
shall be extremely hot when
you cancel the program during
machine operation, so run the
refresh program to allow it to
cool down.
ECD700W 7KG Condenser Dryer Page 23
Operating the product
5.11 End of program
When the program ends, the Fibre Filter
Cleaning and Water Tank warning symbols on
the program observation indicator turn on.
Loading door may be opened and the dryer
machine becomes ready for another run.
Bring the On/Off/Program selection knob to
On/Off position to turn the Dryer off.
If the laundry is not removed
C
after the program is completed,
the wrinkle prevention function
activates for 2 hours to prevent
the laundry inside the machine
to get wrinkled. The program
tumbles the laundry with
10-minute intervals to prevent
them from wrinkling.
Page 24 ECD700W 7KG Condenser Dryer
6 Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
6.1 Lint Filter / Loading Door
Inner Surface
Lint and fiber released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
Always clean the lint filter and
the inner surfaces of the loading
A
C
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and
3. Clean lint, fiber, and cotton raveling by
4. Close the lint filter and place it back into
door after each drying process.
You can clean the lint filter
housing with a vacuum cleaner.
open the lint filter.
hand or with a soft piece of cloth.
its housing.
C
Clean the entire inner surface of
the loading door and loading door
gasket.
C
A layer can build up on the filter
pores that can cause clogging of
the filter after using the machine
for a while. Wash the lint filter
with warm water to remove the
layer that builds up on the lint
filter surface. Dry the lint filter
completely before reinstalling it.
6.2 Cleaning the sensors
There are dampness sensors in the machine
that detect whether the laundry is dry or not.
To clean the sensors:
1. Open the loading door of the machine.
2. Allow the machine to cool down if it is
still hot due to the drying process.
3. Wipe the metal surfaces of the sensor
with a soft cloth, dampened with vinegar
and dry them.
Clean metal surfaces of the
C
sensors 4 times a year.
ECD700W 7KG Condenser Dryer Page 25
Maintenance and cleaning
Do not use metal tools when
cleaning metal surfaces of the
C
A
sensors.
CAUTION: Never use solvents,
cleaning agents or similar
substances for cleaning due to
the risk of fire and explosion!
6.3 Draining the water tank
Dampness of the laundry is removed and
condensed during drying process and the
water that arise accumulates in the water
tank. Drain the water tank after each drying
cycle.
Condensed water is not drinkable!
A
CAUTION: Never remove the
water tank when the program is
A
If you forget to drain the water tank, the
machine will stop during the subsequent
drying cycles when the water tank is full and
the Water Tank warning symbol will flash.
If this is the case, drain the water tank and
press Start / Pause button to resume the
drying cycle.
running!
To drain the water tank:
1. Remove the water tank in the drawer or
container carefully.
2. Drain the water in the tank.
3. If there is lint accumulation in the funnel
of the water tank, clean it under running
water.
4. Place the water tank into its seat.
6.4 For the condenser;
Clean the condenser after every
C
To clean the condenser:
1. If a drying process has been carried out,
2. Unlock the 2 condenser locks after
30 drying cycles or once a month.
open the door of the machine and wait
until it cools down.
opening the kick plate.
Page 26 ECD700W 7KG Condenser Dryer
Maintenance and cleaning
3. Pull out the condenser.
4. Clean the condenser by applying
pressurized water with a shower
armature and wait until the water drains.
5. Place the condenser in its housing.
Fasten the 2 locks and make sure that
they are seated securely.
6. Close the kick plate cover.
ECD700W 7KG Condenser Dryer Page 27
7 Troubleshooting
Drying operation takes too long.
•Fibre filter pores might be clogged. >>> Wash the filter with warm water.
•Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the
filter drawer. (for the products with a heat pump)
•The condenser might be blocked. >>> Wash the condenser.(for the products with a
condenser )
•The ventilation grills in front of the machine may be closed. >>> Remove any objects
in front of the ventilation grills that blocks air.
•Ventilation may be inadequate because the area the machine is installed in is too
small. >>> Open the door or windows to prevent the room temperature from rising
very high.
•A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity
sensor.
•Excessive amount of laundry might be loaded. >>> Do not load the Dryer excessively.
•Laundry might not have been wrung adequately. >>> Perform a higher speed
wringing on the washing machine.
Clothes come out damp after drying.
•A program not suitable for the laundry type may have been used.>>> Check the
maintenance labels on the clothes and select a program suitable for the clothes’ type
or use time programs as extra.
•Fibre filter pores might be clogged. >>> Wash the filter with warm water.
•The condenser might be blocked. >>> Wash the condenser. (for the products with a
condenser)
•Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the
filter drawer.(For the products with a heat pump)
•Excessive amount of laundry might be loaded. >>> Do not load the Dryer excessively.
•Laundry might not have been wrung adequately. >>> Perform a higher speed
wringing on the washing machine.
Dryer does not turn on or program cannot be started. Dryer does not run after it is
configured.
•Power plug might be unplugged. >>> Make sure the power cord is plugged in.
•Loading door might be open. >>> Ensure that the loading door is properly closed.
•A program might not be set or Start/Pause button might not be pressed. >>> Check
that the program is set and it is not in Stand-by position.
•Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
•Loading door might not be closed completely. >>> Ensure that the loading door is
properly closed.
•There might be a power outage. >>> Press the Start/Pause button to start the
program.
•Water tank may be full. >>> Empty the water tank.
Page 28 ECD700W 7KG Condenser Dryer
Troubleshooting
Clothes have shrunk, hardened or spoiled.
• A program not suitable with the laundry type might have been used. >>> Check the
maintenance labels on the clothes and select a program suitable for the clothes.
The lighting inside the Dryer does not turn on. (For models with a lamp)
•Dryer might not be turned on with the On/Off button or program might not be
selected for machines without an On/Off button. >>> Make sure that the Dryer is
turned on.
•Lamp might be malfunctioning. >>> Contact Authorized Service to replace the lamp.
Filter cleaning warning symbol/LED is on/flashing.
• Fibre filter might not be cleaned. >>> Clean the filter.
• The filter slot might be clogged with lints. >>> Clean the filter slot.
• A layer of fluff might have accumulated clogging up the lint filter pores. >>> Wash the
filter with warm water.
• The condenser might be blocked. >>> Wash the condenser.
Water drips from the loading door.
• Fibres might have gathered on the inner sides of the loading door and the loading door
gasket. >>> Clean the inner surfaces of the loading door and the loading door gasket
surfaces.
Loading door opens by itself.
• Loading door might not be closed completely. >>> Push the loading door until the
closing sound is heard.
Water tank warning symbol / led is on/flashing.
• Water tank may be full. >>> Empty the water tank.
• Water discharge hose might have collapsed. >>> If the product is connected directly to
the water drain check the water discharge hose.
A
If the problem persists after following the instructions in this section, contact your
vendor or an Authorized Service. Never try to repair your product yourself.
This warranty is provided in Australia by Glen Dimplex Australia Pty Limited ABN 69
118 275 460 (Phone number 1300 556 816) and in New Zealand by Glen Dimplex
New Zealand Limited NZBN 9429000069823 (Phone number 09 274 8265) in
respect of the Euromaid product.
1. Euromaid Express Warranty
Subject to the exclusions below, we warrant that the product will not have any
electrical or mechanical breakdowns within:
a) In the case of Euromaid products used for personal, domestic or household
purposes, a period of 2 years from the date the product is purchased as a
brand-new product from a retailer located in Australia / New Zealand.
b) In the case of Euromaid products used for purposes other than personal,
domestic or household purposes (including business or commercial use), a
period of 90 days from the date the product is purchased as a brand-new
product from a retailer located in Australia / New Zealand. Euromaid products
are designed and intended for domestic use only; and
c) All warranty repairs must be carried out by Glen Dimplex or their nominated
service agent
Note: warranty periods detailed above may vary in line with agreements with
select retail and builder partners and may differ between Australia and New
Zealand.
The benefits conferred by this express warranty are in addition to the Consumer
Guarantees referred to in section 3 and any other statutory rights you may have
under the Australian / New Zealand Consumer Law and/or other applicable laws.
2. Warranty exclusions
This express warranty does not apply where:
a) The product has been installed, used or operated otherwise than in accordance
with the product manual or other similar documentation provided to you with the
product;
b) The product requires repairs due to damage resulting from accident, misuse,
incorrect installation, insect or vermin infestation, improper liquid spillage,
cleaning or maintenance, unauthorised modification, use on an incorrect voltage,
power surges and dips, voltage supply problems, tampering or unauthorised
repairs by any persons, use of defective or incompatible accessories or exposure
to abnormally corrosive conditions, events independent of human control which
occurred after the goods left the control of Glen Dimplex;
ECD700W 7KG Condenser Dryer Page 33
c) The repair relates to the replacement of consumable parts such as fuses and bulbs
or any other parts of the product which require routine replacement;
d)
You are unable to provide us with reasonable proof of purchase for the product;
e) the breakdown occurs after the expiry of the express warranty period set out in
section 1 or
f) the product was not purchased in Australia / New Zealand as a brand-new
product.
Consumer guarantees
3.
Our goods come with guarantees that cannot be excluded under the Australian / New
Zealand Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
4.
How to make a claim
You may make a claim under this warranty through our website, contacting our
customer care line or via email. Contact details for Glen Dimplex Australia and New
Zealand can be found at the end of this document
To make a valid claim under this warranty, you must:
a) Lodge the claim with us as soon as possible and no later than 14 days after you
first become aware of the breakdown;
b) Provide us with the product serial number;
c) Provide us with reasonable proof of purchase for the product. This can take the
form of a store receipt, new home handover form or other payment receipt
documentation; and
d) If required by us, provide us (or any person nominated by us) with access to the
premises at which the product is located at times nominated by us (so that we
can inspect the product).
ECD700W 7KG Condenser Dryer Page 34
5. Warranty claims
If you make a valid claim under this warranty and none of the exclusions set out in
section 2 apply, we will, at our election, either repair the product or replace the
product with a product of identical specification (or where the product is superseded
or no longer in stock, with a product of as close a specification as possible).
Goods presented for repair may be replaced by refurbished goods of the same type
rather than being repaired. Refurbished parts may be used to repair the goods.
Products are designed and supplied for normal domestic use. We will not be liable to
you under this warranty for business loss or damage of any kind whatsoever.
Glen Dimplex Australia Pty Ltd
www.glendimplex.com.au
Australia
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au
Glen Dimplex New Zealand Ltd
www.glendimplex.co.nz
New Zealand
Ph: 09 274 8265
nztechserv@glendimplex.co.nz
ECD700W 7KG Condenser Dryer Page 35
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND
USING THE APPLIANCE.
The manufacturer will not be responsible for any damage to property or to persons
caused by incorrect installation or improper use of the appliance.
The manufacturer is not responsible for any inaccuracies, due to printing or transcription
errors, contained in this manual. In addition, the appearance of the figures reported is
also purely indicative.
The manufacturer reserves the right to make changes to its products when considered
necessary and useful, without affecting the essential safety and operating
characteristics. Glen Dimplex constantly seeks ways to i
designs of their products.
Whilst every effort is made to produce up to date literature, this document should not
be regarded as an infallible guide. Actual product only should be used to derive cut out
sizes. All appliances must be installed by a qualified person/s with adherence to the
relevant electrical, plumbing and building codes, with compliance being issued as
required by state or national legislation.
Additionally, all upright cookers must have the anti-tilt device installed correctly in
adherence to the relevant standards by a licenced installer.
For maximum effectiveness and efficiency all rangehoods should be installed with the
use of ductwork, by a licenced installer with adherence to the relevant state and national
building codes and regulations.
mprove the specifications and
All Glen Dimplex appliances are for Domestic use only, and must be installed by a
licence installer into Domestic Applications only, without exception and to the required
Authorities guidelines. Any installation outside of this will VOID warranty. Alfresco areas
are not a Domestic application.
Distributed by:
Glen Dimplex Australia Pty Ltd Glen Dimplex New Zealand Ltd
www.glendimplex.com.au www.glendimplex.co.nz
For service advice, please contact the Customer Care Centre by phone or email below.
Australia
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au
New Zealand
Ph: 09 274 8265
nztechserv@glendimplex.co.nz
VERSION1REVISION20210927
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.