EUROM B950I, B1000i, B2000i, B3000i User Manual

User manual

B950I, B1000i, B2000i, B3000i

Page 20

• Always read the user manual thoroughly before using the generator.

• Never use the generator in a closed room/area. Exhaust may cause suffocation.

• The exhaust pipe becomes very hot during operation. Do not touch the exhaust pipe after use.

• Only use approved cables.

• Fuel is very flammable, be careful when filling with gasoline. Do not fill when you are close to open

fire, lighted cigarettes, sparks or similar. Always clean up spilled gasoline.

• Standby power generators for buildings must only be connected by an authorised electrician, who
must comply with the regulations in question. Incorrect connection can make the power/electricity
run back to the generator. This can cause an electric shock if a person gets in contact with the
generator. After the power has been restored the generator may explode, burn or cause a burn in
the electric system.

• Always inspect all connections before you start the machine. This can prevent an accident.

• Always place the generator 1 meter away from buildings or other equipment during operation.

• Only use the generator on a horizontal surface.

• Draw attention to how the generator is to be stopped and understand all its functions. Never leave

the use of the generator to persons who has not received any instruction about the operation.

• Keep children away from the generator during operation.

• Using the generator with wet hands may lead to electric shock.

• Never use the generator in rain or snow. Always make sure that the generator does not become

wet.

NOTE If you are going to use the generator in thin statums of air, higher than 1500 meter above water

surface you shall contact your dealer for guidance.

Page 21

1. Contents

1. Contents...........................................................................................................................................21

2. Identification of components ...............................................................................................................22

3. Automatic current control (SMART)..................................................................................................... 22

4. Before start - Oil ................................................................................................................................23

4.1. Before start - gasoline .................................................................................................................24

4.2. Before start - air filter................................................................................................................... 24

5. Start .................................................................................................................................................25

6. Operation of the generator .................................................................................................................27

6.1. Alternating current ......................................................................................................................27

6.2. Indicators ...................................................................................................................................28

6.3. Direct current..............................................................................................................................28

6.4 Oil warning..................................................................................................................................30

6.5 Stop ...........................................................................................................................................30

7. Maintenance ....................................................................................................................................31

7.1 Changing oil................................................................................................................................ 31

7.2 Air filter .......................................................................................................................................32

7.3 Spark plug ..................................................................................................................................33

8. Transport and storage........................................................................................................................ 33

9. Specifications.................................................................................................................................... 35

10. Trouble shooting.............................................................................................................................. 36

Spare parts

Part list and explosive drawings for the specific product, please contact your

dealer.

If you help find part numbers yourself, it will ease the service.

For purchase of spare parts, please contact your dealer.

Page 22

2. Identification of components

3. Automatic current control (SMART)

The engine speed is automatically adjusted, when the current is disconnected. The same way the speed goes
up when you connect the current. This ensures the fuel consumption being held at a minimum.

Warning - The automatic regulation does not work effectively if an even electric current is needed.

Warning - When the generator is to produce a heavy, even current you shall place the switch in

the OFF position in order to reduce changes in the current.

Warning - When you work with DC (Direct Current), always place the switch in the OFF position.

Choker

Cover

Starter

Engine switch

Control panel
Fuel cap

Fuel cap cent
lever

Cover for
fuse

Muffler
DC

Smart contact

Smart-Throttle switch

Over load indicator

Ground
Oil indicator

AC

DC circuit
Switch

Page 23

4. Before start - Oil

NOTE

- Always inspect the generator on a horizontal surface with a turned-off engine.

- The in-built alarm system will automatically stop the engine before the oil level drops under the

approved level. In order to avoid unpredicted disconnection you shall check the oil level regularly.

- Using the generator with too little oil can cause severe damages to the wear parts of the engine.

Use full-synthetic premium 4-stroke oil, which meets the demands in question.(API)
Loosen the screws that tighten the plate on the backside of the generator and remove the plate. Check the oil
level by removing the oil stick, clean it with a dry clean cloth. Insert the oil stick without screwing it in. See the
oil level on the stick. Fill with oil if necessary.
Oil capacity: 0,25/0,40 L.

Oliepind

Fill oil until here
Screw

Left maintenance
cover

Air cleaner
cover

Oil stick

Oil filler hole

Page 24

4.1. Before start - gasoline

 Use regular unleaded 95 octane gasoline.
 Avoid getting dust, dirt or water in the tank.
 After filling, fasten the tank cover securely.
 Only fill fuel to the indicated marking (see figure below).

4.2. Before start - air filter

Check that the air filter is clean and in good shape.

PROCEDURE

Loosen the screws that fasten the plate on the backside of the generator and remove the plate. On the top of
the air filter a tap is placed, press this down and the air filter is loosened.
Check the filter and clean it, replace if necessary.

WARNING

Never use the generator without an air filter. This will result in dirt being drawn into the carburettor of the
engine.

NOTE

- By transport you always turn the upper part of the gasoline cover to the ”OFF” position.

Fill untill
here

Fuel cap

Fuel cap