EUROLAIKAS FS 1000, FS 1000N Installation Instructions And User Manual

Sectional And Tilting Door Opener

Installation Instructions and User Guide

WARNING

S/N

Please read the manual carefully before installation and use.
The installation of your new door opener must be carried out by a technically qualified
or licensed person.
Attempting to install or repair the door opener without suitable technical qualification
may result in severe personal injury, death and / or property damage.

FS 1000 1000N

Important Safety Recommendations...…………………………….……………………………..1

Product Description & Features.............................................................................................2-3

Pre-Installation Recommendations ........................................................................................4

Installation (Wall Bracket & Door Bracket) .............................................................................4

Installation (Steel Track)……………………………………………………………………… .…...5

Installation (Sectional Steel Track Assembly)..........................................................................6

Battery Backup Assembly (optional)................................................................7

Display Menu Instructions

(Plus II)..........................................................................................................8

Programming Instructions....................................................................................................9-19

Terminal Introduction and Application.................................................................................20-21

Manual Disengagement..........................................................................................................22

Maintenance………………………………………………………….………………………..….….22

Technical Specifications………………………………………………………………………....23-24

Parts Listing………………………………….............................................................................25

Common Fault & Solutions ................................................................................................26-27

CONTENTS

1

FAILURE TO COMPLY WITH THE FOLLOWING SAFETY RECOMMENDATIONS MAY
RESULT IN SERIOUS PERSONAL INJURY, DEATH AND / OR PROPERTY DAMAGE.

1. PLEASE READ CAREFULLY AND ADHERE TO ALL SAFETY AND INSTALLATION

RECOMMENDATIONS.

2. The opener is designed and manufactured to meet local regulations. The installer must be
familiar with local regulations required in respect of the installation of the opener.

3. Unqualified personnel or those persons who do not know the occupational health and
safety standards being applicable to automatic gates and other doors, must in no
circumstances carry out installations or implement systems.

4. Persons who install or service the equipment without observing all the applicable safety
standards will be responsible for any damage, injury, cost, expense or claim whatsoever
any person suffered as a result of failure to install the system correctly and in accordance
with the relevant safety standards and installation manual whether directly or indirectly.

5. For additional safety we strongly recommend the inclusion of Photo Beam. Although the
opener incorporates a pressure sensitive Safety Obstruction Force system the addition of
Photo Beam will greatly enhance the operating safety of an automatic garage door and
provide additional peace of mind.

6. Make sure that the garage door is fully open & stationary before driving in or out of the
garage.

7. Make sure the garage door is fully closed & stationary before leaving.

8. Keep hands and loose clothing off the opener and garage door all the time.

9. The Safety Obstruction System is designed to work on STATIONARY objects only.
Serious personal injury, death and / or property damage may occur if the garage door
comes into contact with a moving object

10. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.

11. Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authority or retailer for recycling
advice.

12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.

- WARNING: Important safety instructions. It is important for the safety of persons to follow
all instructions. Save these instructions.

- Do not allow children to play with door controls. Keep remote controls away from children.

- Watch the moving door and keep people away until the door is completely opened or
closed.

- Take care when operating the manual release since an open door may fall rapidly due to
weak or broken springs, or being out of balance.

- Frequently examine the installation, in particular check cables, springs and mountings for
signs of wear, damage or imbalance. Do not use if repair or adjustment is needed since a
fault in the installation or an incorrectly balanced door may cause injury.

- Each month check that the drive reverses when the door contacts a 50 mm high object
placed on the floor. Adjust if necessary and recheck since an incorrect adjustment may
present a hazard, for drives incorporating an entrapment protection system depending on
contact with the bottom edge of the door.

- Details on how to use the manual release.

- Information concerning the adjustment of the door and drive.

- Disconnect the supply when cleaning or carrying out other maintenance.

- The installation instructions shall include details for the installation of the drive and its
associated components.

IMPORTANT SAFETY RECOMMENDATIONS

2

1. Obstruction force adjustment

The minimum force display “1” and it can be adjusted upward. Display “5” means the

maximum force.

2. Travel speed adjustment

“8” appears on the display means the 80% of the travel speed. Display “A” means the

full speed 160mm/s or 200mm/s.

3. Reversal height adjustment

“0” appears on the display means the door will rebound to the top. Display “1~9”
means the door will rebound to the position of the whole travel. One tenth to Nine tenth of the
whole travel etc.

4. Partial open/height

“0” appears on the display means close the partial open function. Display“1~9” means
to set the different partial open position of the whole travel.

5. Transmitter button recognition function

“0” appears on the display means the buttons recognition function is closed. Display“1”
means the buttons recognition function is open.

6. Codes memory quantity

“A” appears on the display means the maximal code memory quantity is 50pcs. Press
UP/DOWN button once, to increase or decrease quantity. The code memory quantity is set on
5pcs*N, N=1~9. (The quantity is the multiple of 5).

7. Maintenance alarm

“b”appears on the display and led light flashes 10 times quickly means the garage door
and motor need total maintenance.

8. Automatic safety reverse

Automatic stop / automatic reverse are controlled by our software of circuit boards. We
are circumspect to protect your children, pet or other goods.

9. Soft start / Soft stop

Ramping speed up and down at the start and end of each cycle reduces stress on the
door and opener for longer life, and makes for quieter operations.

10. Auto-Close

Auto- Close ensures peace of mind and keeps your house secure by automatically closing
the door upon entering or exiting the garage.

11. Self learning open and close obstruction force

The amount of opener power for different stages of the door’s travel is learnt during setup
and is constantly re-profiled. Opener force measurement automatically adjustment in a
suitable range.

12. Electronic limit, simple adjustment.

You only need control the limit setup from control panels to adjust it exactly, the simple
and quick process for any peoples.

13. Available terminal for Photo beams & Extra receivers & Wire or wireless wall switch
& Caution light & Pass door protection device.

14. Energy saving - L.E.D courtesy light

3 minutes L.E.D light delay, switching on with each cycle to illuminate your darkened
garage.

PRODUCT DESCRIPTION & FEATURES

3

15. Battery backup available

Openers could be supplied power with our battery backup once the power failure at your
home.

16. Self-Lock in gear motors

Gear motor will self-lock with its disengagement systems.

17. Manual release

Don't worry about the power failure, the manual release system is a solution for operation
the door at any time.

18. Transmitter technology

Rolling Code technology (7.38 x 1019 Combinations), 433.92 MHz frequency, 4 channels
design to ensure you can control 4 different doors with one transmitter.

19. Applications

With as little as 30mm required between the ceiling and the highest point of the door travel,
the opener can be flush mounted for low headroom applications.

20. Metal bottom plate, stronger and security.

21. Up / Down moving operation buttons (UP / DOWN)

Close

Open

4

1. Garage door must be able to be lifted and closed easily by hand and without much effort. A

well balanced & sprung door is critical for proper installation.

2. The garage door opener can’t compensate for a badly installed garage door and should

not be used as a solution for a “hard to open” door.

3. If the unit is being installed on an existing door, make sure any existing locking devices are

removed or warranty will be void.

4. An approved outlet must be installed near where the opener is begin installed.

5. There should be a minimum gap of 30mm between the bottom of the chain drive rail and

the top of the garage door at its closest point. (refer to Fig 1.)
Important note: As for additional safety rules, we strongly recommends the fitting of Photo
Electric safety beams on all installations.

Figure 1

Mount Wall Bracket and Door Bracket (Fig2)

Wall Bracket - Close the garage door and measure the
garage door width at the top and mark the centre. Locate and
mount the wall bracket 2cm-15cm above the door on the
inside wall.

(Depend on the actual installation space).

Door Bracket – Fix the door bracket to a structural part of the
door as close to the top edge as possible.

Figure 2

PRE-INSTALLATION RECOMMENDATIONS

INSTALLATION INSTRUCTIONS

5

Installation (Steel Track)

STEP1 (Fig.3)

At tach t h e opener head to the steel t rack. A s sembly the 2 “U” Hangi n g br ack ets
with 6mm nuts supplied.

STEP2 (Fig.3)
Place the steel track and opener head assembly centrally on the garage floor, with
the open head furthest away from the door. Lift the front of the track up to the door
bracket. Insert the pivot pin and secure it with the split pin supplied.
STEP3 (Fig.3, Fig.4)

Lift and support the opener head (with a ladder) so it is
positioned centrally and level. Fix the opener and track
on ceiling by Iron bracket A & B.
WARNING: Do not allow children around the door,
opener or supporting ladder serious injury and/or
damage may result from failure to follow this warning.

STEP4 (Fig.3, Fig.5)
Connect the straight arm to the bent arm with the bolt.
Position and bolt the arms to the top edge of the door using
the bolt supplied.

STEP5

Lift the garage door until the shuttle locks into the
drive chain/belt.
Now, ready to program the openers.

Figure 3

6

Sectional Steel Track Assembly

1. 2-Parts Track:

As Fig.6, slide the A rail into the sleeve, slide the B rail into the sleeve.

3-Parts Track:

As Fig.7, slide the C rail into the sleeve, slide the D rail into the sleeve; slide the E rail into
the sleeve.

2. Cut the plastic thread; pull the screw rod along with inner chain to the end rail position

(Fig.8)

3. As Fig.9, release the nut & spring.

4. Tight the nut to the right position as shown in Fig.10, cut the plastic tape, cut the plastic

thread on sprocket, then whole rail assembled finished.

3 Parts Steel Track

2 Parts Steel Track

F

F

A:1500 mm

B:1500 mm

Sleeve

C:1000 mm

Sleeve

Sleeve

D:1000 mm

E:1000 mm

7

Battery backup Assembly (optional)

Option 1 - Top Fixed

STEP1 (Fig.11)
Assemble the battery & battery bracket like the photo, fix by screws supplied.
STEP2 (Fig.12)
Join the battery to opener, find the Fig.12.

Figure 11 Figure 12

Option 2 - Side Fixed

STEP1 (Fig.13)
Assemble the battery & battery bracket like the photo, fix by screws supplied.
STEP2 (Fig.14)
Join the battery to opener, find the Fig.14.

Figure 13 Figure 14