![](/html/4d/4d3d/4d3d2e01e1666efa45768d02e9d75cca58ac7917c8125977987e3b802b4e74cc/bg1.png)
Bluetooth Handsfree Kit
For Bluetooth Mobile Phones
Operating Manual
![](/html/4d/4d3d/4d3d2e01e1666efa45768d02e9d75cca58ac7917c8125977987e3b802b4e74cc/bg2.png)
Contents
______________________________________________________________________________________________________________
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Pairing to your Bluetooth Mobile Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Basic Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Advanced Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Button Functions Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
______________________________________________________________________________________________________________
Product Overview
2
![](/html/4d/4d3d/4d3d2e01e1666efa45768d02e9d75cca58ac7917c8125977987e3b802b4e74cc/bg3.png)
Charging
When the Charge Indicator turns red, the battery of the kit is low. Charge the
unit.
1. Connect the charger’s plug into the Charger
Port of the ST LIGHT. Connect the charger to
an external power source.
2. When fully charged, disconnect the charger.
Charge Indicator Status:
Low Batt: steady red
Charging: steady orange
Full Charge: steady green
Power On/Off
Power On: Press-and-release the Mic Shaft.
Power Off: Push the Mic Shaft in.
Pairing to your Bluetooth Mobile Phone
Pair the ST LIGHT to your Bluetooth mobile phone to create the link or audio
connection between the two.
1. From OFF, press and hold the Accept Button of
the ST LIGHT.
2. While holding the Accept Button, switch the kit on.
3. When the Bluetooth Indicator turns blinking red/blue, release the Accept
Button. This means the kit is now in pairing mode.
3