Euro Communication EquipementS BTSHARK User Manual

BTSHARK

Bluetooth Headset for Motorcycle

Features

VOX Technology

A2DP Music Streaming

Auto-Volume Level Adjusting

1

A. PRODUCT DESCRIPTION:

SUPERTOOTH BTSHARK is a Bluetooth Headset designed for motorcycle rider or

passenger who wishes to have reliable hands-free, wireless and clear
communications while driving. This headset is equipped with hi-tech features such
as: VOX Technology, A2DP (Advance Audio Distribution Profile) music streaming and
Auto-Volume Level Adjusting.

1. MFB or Multi-Function Button

(power on & off / pairing / answer /
hang-up / reject / voice dial / etc.)

2. Status Indicator

3. Volume Up

4. Volume Down

5. Microphone (On the flexible boom)

6. Charger and Headset Socket

7. NiMh battery

8. Left/Right (L/R) Ear Speaker

B. CHARGING:

1. When the Status Indicator (2) turns Red, the battery is low. Charge the unit using
the provided charger.

2. Connect the charger’s plug to the Charger Socket (6) of the SUPERTOOTH

BTSHARK. Then, plug the charger to an external power source. (Note: Status

Indicator (2) turns Red when charging).

3. When the Status Indicator (2) turns Green, charging is complete.

4. Disconnect the charger.

C. POWER ON OR OFF:

Power On: Press the MFB (1) until Status Indicator (2) turns blue. Or press for

approximately 3 seconds, a beep will be heard.

Power Off: Press the MFB (1) until Status Indicator (2) turns red. Or press for

approximately 5 seconds, a beep will be heard.

D. PAIRING TO YOUR BLUETOOTH MOBILE PHONE:

1. From OFF, press and hold the MFB (1) of the SUPERTOOTH BTSHARK until the

Status Indicator (2) turns blinking red/blue.

2. While the headset is in pairing mode, access the Bluetooth menu of your phone.

Turn on the Bluetooth function then execute a Bluetooth search. (See your
phone’s manual).

3. When the phone displays the list of Bluetooth devices, select SHARKTOOTH then

enter 0000 and press ok. Pairing is successful if the alternating red/blue lights of
the Status Indicator (2) changes to blinking blue.

Note: Some phones do not connect automatically to the kit after pairing. You need to

press the MFB (1) (1st beep) to connect.

Or use the menu of your phone:

Go back to Bluetooth > Paired devices > highlight the name of this headset
(ST MOTO) > press Options > then press Connect.

The SUPERTOOTH BTSHARK is now ready to use.

2