Euro Communication EquipementS BTFMC Users Manual

BTFMC

Bluetooth Wireless Handsfree Kit

PRODUCT OVERVIEW:

1. Center Button (power on & off / pairing / answer / end a call /
reject a call / activate mode / deactivate mode)

2. Status Indicator

3. Left Button (Volume Down)

4. Right Button (Volume Up)

5. UP Button (Selection Up)

6. DOWN Button (Selection Down)

7. Microphone (On the flexible boom)

8. Charger Socket

9. Left/Right (L/R) Ear Speaker

Charging:

Connect the charger’s plug to the Charger Socket of the BTFMC.
Then connect the charger to an external power source.

Charge Indicator (2) Status:
Steady Red: Battery Low
Steady Orange: Charging
Steady Green: Battery Full

When fully charged, disconnect the charger.

Power On:

From Off, press center button for 3 seconds. BTFMC announces “
BTFMC ready. Battery ‘level’. Phone.” Then status indicator blinks
blue.

Power Off:

Press center button for about 5 seconds. BTFMC announces “
BTFMC Powering Down” then status indicator turns red then off.

Pairing Mode:

From Off, press center button for about 5 seconds. BTFMC
announce “British English Selected. From phones Bluetooth menu,
search for devices and select BTFMC. Enter pin code 0000 if
requested.” Then status indicator turns blinking red and blue.

Pairing to Mobile Phone:

From pairing mode, access the Bluetooth menu of your phone
then execute a Bluetooth search. Then follow the headset and
phone prompts to pair the BTFMC. After the successful pairing, a
voice will announce “Pairing successful to phone”.

Pairing Cancel:

During pairing mode, press center button for 2 seconds to cancel
the pairing process. “Pairing Cancel” will be announced and
stops the pairing search.

Receiving Incoming Call:

Answer Call: Press center button for 1 second to accept the

incoming call.

End Call: Press center button for 1 second to end the received
call.

Reject Call: Press center button for 3 seconds to reject the
incoming call. “Call Rejected” will be announced on BTFMC.

Volume UP: Press Right button for 1 second to increase the
volume level. “Maximum Volume” or a beep will be heard if
highest level is reached.

Volume DOWN: Press Left button for 1 second to decrease the
volume level. A beep will be heard if minimum level is reached.