Euro Communication EquipementS BTD3 User Manual

SuperTooth DISCO 3

The portable Bluetooth A2DP stereo speaker
with 2 speakers on the front that you’ll be blown away by 12 Watt of high &
outstanding quality audio!

Product Description

The SuperTooth DISCO 3 is a portable wireless stereo speaker able to stream
music from any Bluetooth A2DP device, including iPhone, iPad – or even iPod
Touch. It is equally compatible with other phones, Computers, and MP3 players
that support Bluetooth A2DP.
The SuperTooth DISCO 3 comes with 3.5mm stereo jack cable for the devices
that do not support Bluetooth A2DP

Product Overview

External Controls Back View

Charging

Charging via Usb Cable

1. Connect the Usb Cable to the DC 5V Usb Input found at the back of the
SuperTooth DISCO 3 then connect the other end of the Usb Cable to your
Computer.

2. The Charge Indicator will steady red while charging. When Charge Indicator
goes green the charging is complete.

2

Turning the SuperTooth DISCO 3 On and Off

Power On: Press and hold the On/Off button for 2 seconds. A power on beep

heard on speaker.
Note: At first time use, turning on the SuperTooth DISCO 3 will
automatically go to pairing mode (ready to be pair).

Power Off: Press and hold the On/Off button for 3 seconds. A power off beep

heard on speaker.

Pairing the Supertooth Disco 3 with your Bluetooth A2DP
phone/device

Pair the SuperTooth DISCO 3 to your phone/device to create the link or audio
connection between the two. Pairing should be done at first connection to a
phone/device.

Important: Make sure that your phone/device supports A2DP* (Advanced Audio
Distribution Profile) and the last paired device is not visible before proceeding.

Note: Any other device previously paired with the SuperTooth DISCO 3 must be
turned off or its Bluetooth must be disabled before proceeding.

1. From Off, Press and hold the On/Off button for 6 seconds until the
Play/Paused button blinks red fast. This indicates that the SuperTooth DISCO
3 is ready to be pair.

2. While the SuperTooth DISCO 3 is in pairing mode, access the Bluetooth
menu of your phone/device. Turn on its Bluetooth function then execute a
Bluetooth search to find the SuperTooth DISCO 3. (See your phone/device’s
manual).

3. When the phone/device displays the list of Bluetooth devices, select ST
DISCO3.

4. When the phone/device asks for the password/pin code, enter 0000 and
press OK.

5. Pairing is successful if the red LED indicator turns off (connected/standby
mode).

6. The SuperTooth DISCO 3 is now ready to use with your phone/device.

*

A2DP (Advanced Audio Distribution Profile) is a technology enabling to stream stereo sound from an audio source
(phone, COMPUTER or laptop) to a stereo speaker or headset via Bluetooth. To do so both devices must support this
profile.

Using the SuperTooth DISCO 3 with your Bluetooth A2DP
phone/device

3