EUROCOM T210V Owner's Manual

Preface

Notice

The company reserves the right to revise this publication or to change its contents without notice. Infor­mation contained herein is for reference only and does not constitute a commitment on the part of the man­ufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or
inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage
resulting from the use (or misuse) of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, translated,
transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer
or creators of this publication, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered
trademarks of their respective companies. They are mentioned for identification purposes only and are not
intended as an endorsement of that product or its manufacturer.

© December 2003

Trademarks

This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home or other limited viewing uses only unless otherwise authorized by Macrovision Cor­poration. Reverse engineering or disassembly is prohibited.

I

Preface

FCC Statement

(Federal Communications Commission)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the service representative or an experienced radio/TV technician for help.



Warning

Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifica­tions not expressly approved by the manufacturer for compliance with the above standards could void your au­thority to operate the equipment.

II

Preface

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons, including the following:

1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub,
in a wet basement or near a swimming pool.

2. Avoid using this equipment with a telephone line (other than a cordless type) during an electrical storm.
There may be a remote risk of electrical shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They
may explode. Check with local codes for possible special disposal instructions.

5. This product is intended to be supplied by a Listed Power Unit (DC Output 20V, 2.5A minimum).

CAUTION

Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equip­ment.

TO REDUCE THE RISK OF FIRE, USE ONLY NO. 26 AWG OR LARGER,

TELECOMMUNICATION LINE CORD

III

Preface

Instructions for Care and Operation

The computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:

1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be
damaged.

Do not expose the computer
to any shock or vibration.

Do not place it on an unstable
surface.

Do not place anything heavy
on the computer.

2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of
heating element. This is an electrical appliance. If water or any other liquid gets into it, the computer
could be badly damaged.

Do not expose it to excessive
heat or direct sunlight.

Do not leave it in a place
where foreign matter or mois­ture may affect the system.

Don’t use or store the com­puter in a humid environment.

Do not place the computer on
any surface that will block the
vents.

IV

Preface

3. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and
other strong magnetic fields. These can hinder proper performance and damage your data.

4. Follow the proper working procedures for the computer. Shut the computer down properly and
don’t forget to save your work. Remember to periodically save your data as data may be lost if the
battery is depleted.

Do not turn off the power
until you properly shut down
all programs.

Do not turn off any peripheral
devices when the computer is
on.

5. Take care when using peripheral devices.

Use only approved brands of
peripherals.

Do not disassemble the com­puter by yourself.

Unplug the power cord before
attaching peripheral devices.

Perform routine maintenance
on your computer.

V

Preface

Power Safety

The computer has specific power requirements:

• Only use a power adapter approved for use with this computer.



Power Safety

Warning

Before you undertake
any upgrade proce­dures, make sure that
you have turned off the
power, and discon­nected all peripherals
and cables (including
telephone lines). It is
advisable to also re­move your battery in
order to prevent acci­dentally turning the
machine on.

• Your AC adapter may be designed for international travel but it still requires a
steady, uninterrupted power supply. If you are unsure of your local power specifi­cations, consult your service representative or local power company.

• The power adapter may have either a 2-prong or a 3-prong grounded plug. The
third prong is an important safety feature; do not defeat its purpose. If you do not
have access to a compatible outlet, have a qualified electrician install one.

• When you want to unplug the power cord, be sure to disconnect it by the plug head,
not by its wire.

• Make sure the socket and any extension cord(s) you use can support the total cur­rent load of all the connected devices.

• Before cleaning the computer, make sure it is disconnected from any external
power supplies (i.e. AC adapter or car adapter).

Do not plug in the power
cord if you are wet.

Do not use the power cord if
it is broken.

Do not place heavy objects
on the power cord.

VI

Preface

Battery Precautions

• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the com­puter.

• Recharge the batteries using the computer’s system. Incorrect recharging may make the battery explode.

• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative
or qualified service personnel.

• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully.
Batteries may explode or leak if exposed to fire, or improperly handled or discarded.

• Keep the battery away from metal appliances.

• Affix tape to the battery contacts before disposing of the battery.

• Do not touch the battery contacts with your hands or metal objects.



Battery Disposal

The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of
its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal
waste stream. Check with your local solid waste officials for details in your area for recycling options or proper
disposal.

Caution

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommend­ed by the manufacturer. Discard used battery according to the manufacturer’s instructions.

VII

Preface

Touch Panel Care

• Touch Panels are made of glass, so do not subject them to heavy shock or stress.

• Do not place heavy objects on the Touch Panel.

• Please use a dry soft cloth when cleaning (do not use any organic solvent acid or alkali solution).

Cleaning

Do not apply cleaner directly to the computer; use a soft clean cloth.
Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.

Servicing

Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and
the computer to electric shock. Refer all servicing to authorized service personnel. Unplug the computer
from the power supply. Then refer servicing to qualified service personnel under any of the following con­ditions:

• When the power cord or AC/DC adapter is damaged or frayed.

• If the computer has been exposed to rain or other liquids.

• If the computer does not work normally when you follow the operating instructions.

• If the computer has been dropped or damaged (do not touch the poisonous liquid if the LCD panel breaks).

• If there is an unusual odor, heat or smoke coming from your computer.

VIII

Preface

Travel Considerations

Packing

As you get ready for your trip, run through this list to make sure the system is ready to go:

1. Check that the battery pack and any spares are fully charged.

2. Power off the computer and peripherals.

3. Close the display panel and make sure it’s latched.

4. Disconnect the AC adapter and cables. Stow them in the carrying bag.

5. The AC adapter uses voltages from 100 to 240 volts so you won’t need a second voltage adapter.

However, check with your travel agent to see if you need any socket adapters.

6. Put the computer in its carrying bag and secure it with the bag’s straps.

7. If you’re taking any peripherals (e.g. a printer, mouse or digital camera), pack them and those

devices’ adapters and/or cables.

8. Anticipate customs - Some jurisdictions may have import restrictions or require proof of ownership

for both hardware and software. Make sure your “papers” are handy.



Power Off Before Traveling

Make sure that your notebook is completely powered off before putting it into a travel bag (or any such container).
Putting a notebook which is powered on in a travel bag may cause the vents/intakes to be blocked. To prevent
your computer from overheating make sure nothing blocks the vent/fan intake while the computer is in use.

IX

Preface

On the Road

In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshoot­ing, keep these points in mind:

Hand-carry the computer - For security, don’t let it out of your sight. In some areas, computer theft is
very common. Don’t check it with “normal” luggage. Baggage handlers may not be sufficiently careful.
Avoid knocking the computer against hard objects.

Beware of Electromagnetic fields - Devices such as metal detectors & X-ray machines can damage the
computer, hard disk, floppy disks, and other media. They may also destroy any stored data - Pass your
computer and disks around the devices. Ask security officials to hand-inspect them (you may be asked to
turn it on). Note: Some airports also scan luggage with these devices.

Fly safely - Most airlines have regulations about the use of computers and other electronic devices in
flight. These restrictions are for your safety, follow them. If you stow the computer in an overhead com­partment, make sure it’s secure. Contents may shift and/or fall out when the compartment is opened.

Get power where you can - If an electrical outlet is available, use the AC adapter and keep your bat­tery(ies) charged.

Keep it dry - If you move quickly from a cold to a warm location, water vapor can condense inside the
computer. Wait a few minutes before turning it on so that any moisture can evaporate.

X

Preface

Developing Good Work Habits

Developing good work habits is important if you need to work in front of the computer for long periods
of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your
hands, wrists or other joints. The following are some tips to reduce the strain:

• Adjust the height of the chair and/or desk so that the keyboard is at or slightly
below the level of your elbow. Keep your forearms, wrists, and hands in a relaxed
position.

• Your knees should be slightly higher than your hips. Place your feet flat on the
floor or on a footrest if necessary.

• Use a chair with a back and adjust it to support your lower back comfortably.

• Sit straight so that your knees, hips and elbows form approximately 90-degree
angles when you are working.

• Take periodic breaks if you are using the computer for long periods of time.

Remember to:

• Alter your posture frequently.

• Stretch and exercise your body several times a day.

• Take periodic breaks when you work at the computer for long periods of time. Fre­quent and short breaks are better than fewer and longer breaks.

XI

Preface

Lighting

Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your
neck and shoulders.

• Position the display to avoid glare or reflections from overhead lighting or outside sources of light.

• Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen
clearly.

• Position the display directly in front of you at a comfortable viewing distance.

• Adjust the display-viewing angle to find the best position.

XII

Preface

Contents

Notice ...........................................................................I

Trademarks ..........................................................I

FCC Statement ...................................................II

Instructions for Care and Operation ................. IV

Power Safety .....................................................VI

Battery Precautions ..........................................VII

Touch Panel Care .......................................... VIII

Cleaning ........................................................ VIII

Servicing ........................................................ VIII

Travel Considerations .......................................IX

Remember to: ......................................................... I-XI

Introduction

Overview ..................................................................1-1

Advanced Users .....................................................1-1

Beginners and Not-So-Advanced Users .................1-1

Warning Boxes .......................................................1-2

Not Included ...........................................................1-2

System Software .....................................................1-2

Quick Start Guide .....................................................1-3

System Map ..............................................................1-4

Model Differences ..................................................1-4

Getting to Know Your Computer ...........................1-5

Top View ................................................................. 1-6

The LCD Swivel Screen .......................................... 1-7

Top View with LCD Open .................................... 1-8

PC Camera ............................................................ 1-9

LCD Swivel Screen .............................................. 1-9

LED Power Indicators .......................................... 1-9

Cover Sensors ..................................................... 1-10

LCD Swivel & Side Hinges ............................... 1-11

Power Button ...................................................... 1-11

Stereo Speakers .................................................. 1-11

Keyboard ............................................................ 1-12

TouchPad & Buttons .......................................... 1-12

Microphone ......................................................... 1-12

Front View ............................................................. 1-13

LCD Latches ....................................................... 1-13

Microphone-In Jack ............................................ 1-13

Headphone-Out Jack .......................................... 1-14

Infrared Transceiver ........................................... 1-14

LED Status Indicators ......................................... 1-14

Hot-Key Buttons ................................................. 1-15

Left Side View ....................................................... 1-16

Security Lock Slot .............................................. 1-16

Vent .................................................................... 1-16

Stylus Pen Holder ............................................... 1-16

Right Side View ..................................................... 1-17

XIII

Preface

4-in-1 Flash Card Reader ....................................1-17

2 * USB 2.0 Ports ................................................1-18

PC Card Slot ........................................................1-18

Rear View ...............................................................1-19

External Monitor (CRT) Port ..............................1-19

RJ-45 LAN Jack ..................................................1-19

RJ-11 Phone Jack ................................................1-20

DC-In Jack ..........................................................1-20

Vent .....................................................................1-20

Bottom View ..........................................................1-21

Stylus Pen Holder ................................................1-21

Battery .................................................................1-21

Wireless LAN (Network) Module ......................1-22

Hard Disk Drive ..................................................1-22

Vent .....................................................................1-22

Using The Computer

Overview ..................................................................2-1

The Power Sources ...................................................2-2

AC Adapter ............................................................2-2

Battery ....................................................................2-3

Recharging the Battery with the AC Adapter ........2-3

Proper handling of the Battery Pack .....................2-3

Turning on the Computer .........................................2-4

LED Indicators .........................................................2-5

LED Power Indicators ........................................... 2-5

LED Status Indicators ............................................ 2-6

Hard Disk Drive ....................................................... 2-7

The Floppy Disk Drive (Optional) ........................... 2-8

Inserting/Removing Floppy Disks ......................... 2-8

CD Device/DVD Device (Optional) ........................ 2-9

Optional CD/DVD Device Options ..................... 2-10

Loading CDs or DVDs ........................................ 2-10

Handling CDs or DVDs ....................................... 2-11

DVD Regional Codes .......................................... 2-12

Changing DVD Regional Codes ........................ 2-13

4-in-1 Card Reader ................................................. 2-14

PC Card Slot .......................................................... 2-15

Inserting and Removing PC Cards ...................... 2-15

Hot-Keys ................................................................ 2-16

The Keyboard ........................................................ 2-17

The Function Keys ............................................. 2-17

Numeric Keypad ................................................. 2-18

Touch Panel (Model A Only) ................................ 2-19

TouchPad and Buttons/Mouse ............................... 2-22

Configuring the TouchPad and Buttons .............. 2-23

Adding a Printer ..................................................... 2-24

USB Printer .......................................................... 2-24

Install Instructions: ............................................. 2-24

Parallel Printer ..................................................... 2-24

XIV

Preface

Advanced Controls

Overview ..................................................................3-1

Advanced Video Controls ........................................3-2

Opening the LCD ...................................................3-2

Video Driver Controls ..............................................3-3

Making Adjustments for the Display .....................3-3

Display Properties ..................................................3-4

S3 Control Taskbar Utility .....................................3-5

S3 Advanced Display Properties ............................3-5

Display Devices ........................................................3-7

Power Management Features ...................................3-8

Advanced Configuration and Power Interface .......3-8

Enabling Power Options ...........................................3-9

Power Schemes ......................................................3-10

Conserving Power (System) .................................3-11

Hibernate Mode vs. Shutdown .............................3-11

Standby Mode vs. Hibernate Mode ......................3-11

Standby ................................................................3-12

Hibernate .............................................................3-12

Configuring the Power Button .............................3-13

Battery Information ................................................3-14

New Battery ........................................................3-14

Battery Life .........................................................3-14

Battery FAQ .........................................................3-15

Via Power Saver 2.0 .............................................. 3-16

PC Camera ............................................................. 3-17

PC Camera Audio Setup ...................................... 3-17

AMCAP ............................................................... 3-19

Set Capture File ..................................................... 3-19

Wireless LAN Module ........................................... 3-20

Drivers & Utilities

Overview .................................................................. 4-1

What to Install .......................................................... 4-2

New Hardware Found ............................................ 4-2

Authorized Driver Message ................................... 4-3

Version Conflict Message ..................................... 4-3

Updating/Reinstalling Individual Drivers ............. 4-3

Driver Installation .................................................... 4-4

Automatic Driver Installation ............................... 4-4

Windows XP ............................................................ 4-6

VIA 4 in 1 ............................................................. 4-6

VIA VGA (Video) ................................................ 4-6

VIA LAN .............................................................. 4-7

Modem .................................................................. 4-7

PC Card/PCMCIA ................................................ 4-7

PC Camera ............................................................ 4-8

Wireless LAN ....................................................... 4-8

Touch Panel (Model A Computers) ..................... 4-9

XV

Preface

Infrared (VIA FIR) ................................................4-9

TouchPad ............................................................4-10

VIA USB 2.0 .......................................................4-10

VIA Power Saver ................................................4-10

VIA Audio ...........................................................4-10

BIOS Utilities

Overview ..................................................................5-1

Important BIOS Settings ..........................................5-2

The Power-On Self Test (POST) .............................5-3

FirstWare Utilities ..................................................5-4

POST Screen ............................................................5-5

Failing the POST ....................................................5-6

Fatal Errors ............................................................5-6

Non-Fatal Errors ...................................................5-6

The Setup Program ...................................................5-7

Entering Setup ........................................................5-7

Setup Screens .........................................................5-7

Main Menu ...............................................................5-8

System Time & Date (Main Menu) ..........................5-8

Primary Master (Main Menu) ..................................5-9

QuickBoot Mode: (Main Menu) ..............................5-9

Summary screen: (Main Menu) ................................5-9

Advanced Menu .....................................................5-10

Firstware Language: (Advanced Menu) .................5-11

Firstware Authentication Level:

(Advanced Menu) .................................................. 5-11

Firstware Video Mode: (Advanced Menu) ............ 5-11

Boot-time Diagnostic Screen: (Advanced Menu) .. 5-11

Advanced Chipset Control: (Advanced Menu) ..... 5-12

I/O Device Configuration: (Advanced Menu) ....... 5-12

Legacy USB Support: (Advanced Menu) .............. 5-13

Large Disk Access Mode: (Advanced Menu) ........ 5-13

Installed O/S: (Advanced Menu) ........................... 5-13

Reset Configuration Data: (Advanced Menu) ....... 5-13

Security Menu ........................................................ 5-14

Security Menu ........................................................ 5-14

Set Supervisor Password (Security Menu) ............ 5-15

Set User Password (Security Menu) ...................... 5-15

Fixed disk boot sector: (Security Menu) ................ 5-15

Virus check/System backup reminder:

(Security Menu) ..................................................... 5-15

Password on boot: (Security Menu) ....................... 5-16

Power Menu ........................................................... 5-17

PC Beep: (Power Menu) ........................................ 5-17

Turbo/DeTurbo (Power Menu) .............................. 5-17

Boot Menu ............................................................. 5-18

Boot Menu ............................................................. 5-18

Phoenix FirstWare Utilities ................................. 5-19

Exit Menu .............................................................. 5-20

XVI

Preface

Upgrading The Computer

Overview ..................................................................6-1

When Not to Upgrade ............................................6-2

Removing the Battery ...............................................6-3

Battery Removal Process .......................................6-3

Upgrading the Hard Disk Drive ...............................6-4

Hard Disk Upgrade Process ...................................6-4

Upgrading the System Memory (RAM) ...................6-5

Memory Upgrade Process ......................................6-5

Upgrading the Processor ..........................................6-7

Troubleshooting

Overview ..................................................................7-1

Basic Hints and Tips ................................................7-2

Backup and General Maintenance ............................7-3

Viruses ......................................................................7-4

Upgrading and Adding New Hardware/Software .... 7-5

Power ........................................................................7-7

Display .....................................................................7-9

Boot Password ........................................................7-10

Audio ......................................................................7-11

CD Device (Optional) ............................................7-12

Keyboard ................................................................7-13

Operation ................................................................7-14

Appendix A. Model A Specifications

Processor Options ................................................... A-1

Memory ................................................................... A-1

Core Logic .............................................................. A-1

Structure .................................................................. A-1

Security ................................................................... A-1

BIOS ....................................................................... A-1

LCD ........................................................................ A-1

Storage .................................................................... A-2

PC Card ................................................................... A-2

Audio ...................................................................... A-2

Keyboard ................................................................. A-2

Pointing Device ....................................................... A-2

Interface .................................................................. A-3

Power ...................................................................... A-3

Indicators ................................................................ A-3

Buttons .................................................................... A-3

Environmental Spec ................................................ A-4

Physical Dimensions ............................................... A-4

Weight ..................................................................... A-4

Optional .................................................................. A-4

Appendix B. Model B Specifications

Processor Options ....................................................B-1

Memory ....................................................................B-1

XVII

Preface

Core Logic ............................................................... B-1

Structure .................................................................. B-1

Security .................................................................... B-1

BIOS ........................................................................ B-1

LCD ......................................................................... B-1

Storage ..................................................................... B-2

PC Card ................................................................... B-2

Audio ....................................................................... B-2

Keyboard ................................................................. B-2

Pointing Device .......................................................A-2

Interface ................................................................... B-3

Power ....................................................................... B-3

Indicators ................................................................. B-3

Buttons .................................................................... B-3

Environmental Spec ................................................ B-4

Physical Dimensions ...............................................B-4

Weight ..................................................................... B-4

Optional ................................................................... B-4

XVIII

Chapter 1: Introduction

Introduction



1

Overview

This manual refers to the hardware and essential software required to run your
computer. Depending on how your system is configured, some or all of the
features described may already be set up. This chapter covers:

• The Manual — how to use it

• System Map — navigating around your computer

Advanced Users

If you are an advanced user you may skip over most of this manual. However
you may find it useful to refer to the

Utilities” on page 5 - 1 and

may find the notes marked with a

“Upgrading The Computer” on page 6 - 1. You

Beginners and Not-So-Advanced Users

If you are new to computers (or do not have an advanced knowledge of them)
then you should try to look through all the documentation. Do not worry if you
do not understand everything the first time. Keep this manual nearby and refer
to it to learn as you go. You may find it useful to refer to the notes marked with
a

 as indicated in the margin.

“What to Install” on page 4 - 2, “BIOS

 of interest to you.

Notes

Check the light colored
boxes with the mark
above to find detailed
information about the
computer’s features.

Overview 1 - 1

1

Introduction

Warning Boxes

No matter what your level please pay careful attention to the warning and safe­ty information indicated by the  symbol. Also please note the safety and
handling instructions as indicated in the

Preface.

Not Included

Operating Systems (e.g. Windows XP etc.) have their own manuals, as do ap­plications (e.g. word processing, spreadsheet and database programs). If you
have questions about the operating systems or programs then please consult
the appropriate manuals.

System Software

Your computer may already come with system software pre-installed. Where
this is not the case, or where you are re-configuring your computer for a dif­ferent system, you will find this manual refers to the following operating sys­tems:

• Microsoft Windows XP Professional & Home Editions

1 - 2 Overview

Quick Start Guide

This guide assumes that you are already familiar with computers and can tell
at a glance what and where all the key components are. If you are not that com­fortable with this type of device, then please refer to the following pages,
which give an overview of the system.

It is still best to review these steps, before taking any action. If there is any­thing you are not sure about, then please refer to the appropriate chapter before
continuing.

Unless you need to install an operating system, your computer should be ready
to work right out of the box. Before you begin please follow the safety instruc­tions in the Preface.

1. Remove all packing materials.

2. Securely attach any peripherals you want to use with the computer (e.g.

keyboard and mouse) to their ports.

3. Attach the AC adapter to the DC-in jack at the rear of the computer (see

“Rear View” on page 1 - 19), then plug the AC power cord into an outlet,

and connect the AC power cord to the AC adapter.

4. Raise the LCD Swivel Screen to a comfortable viewing angle.

5. Press the power button to turn “On”.

Introduction



Peripheral Devices

Please note that pe­ripherals (printers, dig­ital cameras, etc.)
which attach to your
computer by USB
ports may be connect­ed after Windows is
up and running. All oth­er peripherals must be
connected before you
turn on the system.

1

Quick Start Guide 1 - 3

1

Introduction

System Map

Your computer has a lot of built-in features. Most of these are enabled by your
operating system. Further explanations of the various subsystems are covered
in the chapter or pages indicated.

Model Differences

This notebook series includes two different model types. Model A includes a
Touch Panel screen, Model B does not. The specifications for each model are
listed in “Appendix A. Model A Specifications” on page A - 1 and “Appendix

B. Model B Specifications” on page B - 1.

In addition both Model A and Model B have two different designs as pictured
on the following page.

1 - 4 System Map

Getting to Know Your Computer

The following graphics will help you to become familiar with the basic func­tions, and to learn the location of the various ports and components of your
computer.

Introduction



Design Differences

This manual refers to
the two notebook de­signs pictured on this
page.

The designs vary
slightly in external de­sign. Photographs
used throughout this
manual are of Design I.

1

Design I Design II

Figure 1 - 1

Design Differences

System Map 1 - 5

1

Introduction

Top View

Figure 1 - 2

Top View with LCD

Panel Closed

1. LCD Latches

2. LED Indicators

To open the LCD display:

1. Place the computer on a stable surface.

2. Press the latches in the direction of the arrows (press in) to release the
top cover.

3. Lift the top cover to reveal the LCD Swivel Screen and keyboard.

4. Adjust the LCD Swivel Screen to a comfortable viewing angle.

5. The LED indicators show the power and battery status of the computer.

6. If you wish to operate the computer in Tablet Mode see page 1 - 7.

2

11

1

2

1 - 6 Top View

The LCD Swivel Screen

You can use the computer either in Notebook Mode, or in Tablet Mode. To
put the computer into Tablet Mode:

1. Unlock the LCD side hinges & by moving them in the direction of the
arrows.

2. Carefully rotate the LCD fully in the direction indicated by the arrow , then
lock the side hinges & .

3. Move latches & in and to the left (if they are not already in this
position), then push the LCD down to lock it in position.

1 2

4 5

1 2

1 2

3

4

5

3

Introduction

Figure 1 - 3

Rotating the LCD

Swivel Screen

1

The LCD Swivel Screen 1 - 7

1

Introduction

Top View with LCD Open

Figure 1 - 4

Top View with LCD

Panel Open

1

1. Built-In PC Camera
(Optional)

2. LCD Swivel Screen

3. LED Power
Indicators

4. Cover Sensors

5. LCD Swivel Hinge

6. LCD Side Hinges

7. Power Button

8. Speakers

9. Keyboard

10. TouchPad and
Buttons

11. Built-In Microphone

1 - 8 The LCD Swivel Screen

2

3

6

8

5

4

6

8

7

9

11

10

PC Camera

If you have purchased the optional PC Camera, make sure you install the soft­ware application (see “PC Camera” on page 4 - 8 & 3 - 17).

LCD Swivel Screen

The computer comes with a TFT (Thin Film Transistor), Liquid Crystal Dis­play screen (see “LCD” on page A - 1 or “LCD” on page B - 1 for details).
The screen can rotate and tilt for best visibility in Notebook Mode, and flip
for use in Tablet Mode. The screen may be rotated to appear in Landscape
Mode or Portrait Mode by means of the video driver (see “S3 Control Task-

bar Utility” on page 3 - 5) or “Q” Hot-Key (see “Q Key Functions” on page 2

- 16).

Introduction



Touch Panel Input

Device

Do not use any sharp
or pointed objects as
your input device e.g.
the end of a pen or
pencil. You should only
use the provided stylus
pen (PDA type) as
your input device.

Screen Rotation

1

If your computer is Model A the screen also acts as a Touch Panel when the
driver is installed (see “Touch Panel (Model A Computers)” on page 4 - 9).
You can use the stylus pen provided to point directly to objects on the screen
in much the same way as you would use your mouse as the pointing device
(see “Touch Panel (Model A Only)” on page 2 - 19).

LED Power Indicators

These indicators display the system power status, and battery status of the
computer (see “LED Power Indicators” on page 2 - 5).

The LCD Swivel Screen 1 - 9

Make sure the screen
rotation driver (see

“What to Install” on
page 4 - 2) is installed

before attempting to
rotate the screen.

1

Introduction

Cover Sensors



Lid Button

It is recommended that
you set the lid (left
LCD cover sensor)
power button to “Do
nothing”.

This will prevent acci­dentally triggering a
power saving mode
when you rotate the
LCD swivel screen.

These switches act as sensors to tell when the LCD Swivel Panel is closed, in
Notebook Mode, or in Tablet Mode.

Mode Left LCD Cover Sensor Right LCD Cover Sensor

Notebook

Mode

(LCD Open)

Notebook

Mode

(LCD Closed)

Tablet Mode

Press the left LCD cover sensor to

trigger the default power saving state

(“When I close the lid of my portable

computer”).

Close the LCD to automatically trigger
the default power saving state (“When I
close the lid of my portable computer”).

N/A

Press and hold the right LCD cover
sensor, and simultaneously press/tap
the “Q” key to trigger the functions as

per “Q Key Functions” on page 2 - 16.

N/A

If the LCD is fully locked down, the right

LCD cover sensor will be depressed

automatically. Press/tap the “Q” key to

trigger the functions as per “Q Key

Functions” on page 2 - 16.

Table 1 - 1

Cover Sensor

Functions

See Lid in Figure 3 - 10 on page 3 - 13 for information on setting the power
saving state. See the sidebar for the power scheme setting recommendation.

1 - 10 The LCD Swivel Screen