Eurocom R130T User Manual
V09.1.00BETA
Preface
Notice
The company reserves the right to revise this publication or to change its contents without notice. Information
contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or
any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear
in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse)
of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators
of this publication, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended
as an endorsement of that product or its manufacturer.
©June 2009
Trademarks
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended fo r home
or other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Intel, Celeron, and Intel Core are trademarks/registered trademarks of Intel Corporation.
I
Preface
FCC Statement
(Federal Communications Commission)
You are cautioned that changes or modifications not expressly approved by the party responsible for comp liance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Re orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the service representative or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1. This device may not cause interference.
And
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
II
Preface
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator
and your body.
Warning
Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the manufacturer for compliance with the above standard s could void your authority to operate the
equipment.
If your purchase option includes both Wireless LAN and 3.75G modules, then the appropriate antennas will be installed.
Note that In order to comply with FCC RF exposure compliance requirements, the antenna must not be co-located or operate
in conjunction with any other antenna or transmitter.
III
Preface
IMPORTANT SAFETY INSTRUCTIONS
Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury
to persons when using any electrical equipment:
1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sin k or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using this equipment with a telephone line (other than a cordless type) during an electrical storm. There
may be a remote risk of electrical shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special disposal instructions.
5. This product is intended to be supplied by a Listed Power Unit with an AC Input of 100 - 240V, 50 - 60Hz, DC
Output of 19V, 3.42A OR 18.5V, 3.5A (65 Watts) minimum AC/DC Adapter.
This Computer’s Optical Device is a Laser Class 1 Product
IV
Preface
Instructions for Care and Operation
The computer is tough, but it can be damaged. To prevent this, follow these suggestions:
1. Don’t drop it, or expose it to shock. the tough magnesium alloy case and shock mounted design will help the
computer resist shocks, bumps and small drops but If the computer falls, the case and the components could
still be damaged so try and this situation.
• Do not place it on an unstable surface.
• Do not place anything heavy on the computer
2.
Keep it dry , an d don’t overhea t it.
The computer is spill resistant, but as with any electrical appliance, contact with water is to be avoided.
• Do not expose it to excessive heat.
• Do not leave it in a place where foreign matter or moisture may affect the system.
• Don’t store the computer in a humid environment.
3. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other
strong magnetic fields. These can hinder proper performance and damage your data.
4. Follow the proper workin g procedu res for t he comput er. Shut the computer down properly and don’t for ge t
to save your work. Remember to periodically save your data as data may be lost if the battery is depleted
• Do not turn off the power until you properly sh ut down all programs.
• Do not turn off any peripheral devices when the computer is on.
• Do not disassemble the computer by yourself.
• Perform routine maintenance on your computer.
5. Take care when using peripheral devices.
• Use only approved brands of peripherals.
• Unplug the power cord before attaching peripheral devices.
Keep the computer and power supply away from any kind of he ating element.
V
Preface
Power Safety
The computer has specific power requirements:
Power Safety
Warning
Before you undertake
any upgrade procedures, make sure that
you have turned off the
power, and disconnected all peripherals
and cables (including
telephone lines). It is
advisable to also remove your battery in
order to prevent accidentally turning the
machine on.
VI
•Only use a power adapter approved for use with this computer.
•Your AC/DC adapter may be designed for international travel but it still requires a steady,
uninterrupted power supply. If you are unsure of your local power specifications, consult
your service representative or local power company.
•The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong
is an important safety feature; do not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.
•When you want to unplug the power cord, be sure to disconnect it by the plug head, not by
its wire.
•Make sure the socket and any extension cord(s) you use can support the total current load
of all the connected devices.
•Before cleaning the computer, make sure it is disconnected from any external power supplies (i.e. AC/DC adapter or car adapter).
Do not plug in the power
cord if you are wet.
Do not use the power cord if
it is broken.
Do not place heavy objects
on the power cord.
Preface
Battery Precautions
• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.
• Do not remove any batteries from the computer while it is powered on.
• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even
if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly
result in fire.
• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.
• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service repre sent ative or qual-
ified service personnel.
• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries
may explode or leak if exposed to fire, or improperly handled or discarded.
• Keep the battery away from metal appliances.
• Affix tape to the battery contacts before disposing of the battery.
• Do not touch the battery contacts with your hands or metal objects.
Battery Disposal & Caution
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life,
under various state and local laws, it may be illegal to dispose of this battery in to the municipal waste stream. Check with
your local solid waste officials for details in your area for recycling options or proper disposal.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalen t type recommended by the
manufacturer. Discard used battery according to the manufacturer’s instructions.
VII
Preface
Cleaning
Do not apply cleaner directly to the computer; use a soft clean cloth.
Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.
Servicing
Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the
computer to electric shock. Refer all servicing to authorized service personnel. Unplug the computer from the
power supply. Then refer servicing to qualified service personnel under any of the following conditions:
• When the power cord or AC/DC adapter is damaged or frayed.
• If the computer has been exposed to rain or other liquids.
• If the computer does not work normally when you follow the operating instructions.
• If the computer has been dropped or damaged (do not touch the poisonous liquid if the LCD panel breaks).
• If there is an unusual odor, heat or smoke coming from your computer.
Removal Warning
When removing any cover(s) and screw(s) for the purposes of device upg rade, remember to replace the cover(s) and
screw(s) before turning the computer on.
VIII
Preface
Travel Considerations
Packing
As you get ready for your trip, run through this list to make sure the system is ready to go:
1. Check that the battery pack and any spares are fully charged.
2. Power off the computer and peripherals.
3. Close the display panel and make sure it’s latched.
4. Disconnect the AC/DC adapter and cables. Stow them in the carrying bag.
5. The AC/DC adapter uses volt ages from 100 to 240 volt s so you won’t need a second volt age adapter. However ,
check with your travel agent to see if you need any socket adapters.
6. Put the notebook in its carrying bag and secure it with the bag’s straps.
7. If you’re taking any perip herals (e.g. a printer, mouse or digital camera), pack them and those devices’ adapters
and/or cables.
8. Anticipate customs - Some jurisdictions may have import restrictions or require proof of ownership for both
hardware and software. Make sure your docume nts are prepared.
Power Off Before Traveling
Make sure that your notebook is completely powered off before putting it into a travel bag (or any such container). Putting a
notebook which is powered on in a travel bag may cause the vent(s)/fan intake(s)/outlet(s) to be blocked. To prev ent your
computer from overheating make sure nothing blocks the vent(s)/fan intake(s)/outlet(s) while the computer is in use.
IX
Preface
On the Road
In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting,
keep these points in mind:
Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very
common. Don’t check it with normal luggage. Baggage handlers may not be sufficiently careful. Avoid knocking the computer against hard objects.
Beware of Electromagnetic fields - Devices such as metal detectors & X-ray machines can damage the computer, hard disk, floppy disks, and other media. They may also destroy any stored data - Pass your computer and
disks around the devices. Ask security officials to hand-inspect them (you may be asked to turn it on). Note:
Some airports also scan luggage with these devices.
Fly safely - Most airlines have regulations about the use of computers and other electronic devices in flight.
These restrictions are for your safety, follow them. If you stow the notebook in an overhead compartment, make
sure it’s secure. Contents may shift and/or fall out when the compartment is opened.
Get power where you can - If an electrical outlet is available, use the AC/DC adapter and keep your battery(ies)
charged.
Keep it dry - If you move quickly from a cold to a warm location, water vapor can condense inside the computer.
Wait a few minutes before turning it on so that any moisture can evaporate.
X
Preface
Developing Good Work Habits
Developing good work habits is important if you need to work in front of the computer for long periods of time.
Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or
other joints. The following are some tips to reduce the strain:
• Adjust the height of the chair and/or desk so that the keyboard is at or slightly belo w the
level of your elbow. Keep your forearms, wrists, and hands in a relaxed position.
• Your knees should be slightly higher than your hips. Place your feet flat on the floor or on
a footrest if necessary.
• Use a chair with a back and adjust it to support your lower back comfortably.
• Sit straight so that your knees, hips and elbows form approximately 90-degree angles
when you are working.
• Take periodic breaks if you are using the computer for long periods of time.
Remember to:
• Alter your posture frequently.
• Stretch and exercise your body several times a day.
• T ake periodic breaks when you work at the computer for long periods of time. Frequent and
short breaks are better than fewer and longer breaks.
XI
Preface
Lighting
Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and
shoulders.
• Position the display to avoid glare or reflections from overhead lighting or outside sources of light.
• Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly.
• Position the display directly in front of you at a comfortable viewing distance.
• Adjust the display-viewing angle to find the best position.
LCD Screen Care
To prevent image persistence on LCD monitors (caused by the continuous display of graphics on the screen for
an extended period of time) take the following precautions:
• Set the Windows Power Plans to turn the screen off after a few minutes of screen idl e time.
• Use a rotating, moving or blank screen saver (this prevents an image from being displayed too long).
• Rotate desktop background images every few days.
• Turn the monitor off when the system is not in use.
XII
Contents
Notice ................................................................................. I
FCC Statement .............................................................II
FCC RF Radiation Exposure Statement: ................... III
Instructions for Care and Operation ........................... V
Power Safety ..............................................................VI
Battery Precautions ...................................................VII
Cleaning .................................................................. VIII
Servicing ................................................................. VIII
Travel Considerations ................................................IX
Quick Start Guide
Overview ........................................................................1-1
Introduction ....................................................................1-2
LED Backlight LCD ....................................................1-2
Advanced Users ...........................................................1-3
Beginners and Not-So-Advanced Users ......................1-3
Warning Boxes ............................................................1-3
Not Included ................................................................1-4
System Software ..........................................................1-5
System Startup ...............................................................1-6
Operating System Setup ................................................1-7
System Map: LCD Panel Open ......................................1-8
LED Indicators ............................................................1-9
Preface
Keyboard ...................................................................... 1-10
Function Keys & Visual Indicators ...........................1-11
System Map: Front & Rear Views ...............................1-12
System Map: Left View ...............................................1-13
System Map: Right View .............................................1-14
System Map: Bottom View ..........................................1-15
Windows Vista Start Menu & Control Panel ...............1-16
Video Features .............................................................1-17
Display Devices & Options ......................................1-17
Power Options ............................................ .... .... ..........1-19
Features & Components
Overview ........................................................................2-1
Hard Disk Drive/Solid State Drive ................................2-2
Optical (CD/DVD) Device ............................................2-3
Loading Discs ..............................................................2-3
Handling CDs or DVDs ...............................................2-4
DVD Regional Codes ..................................................2-5
7-in-1 Card Reader .........................................................2-6
ExpressCard Slot ............................................................2-7
Inserting and Removing ExpressCards ........................2-7
Touchpad and Buttons/Mouse .......................................2-8
Audio Features ...............................................................2-9
XIII
Preface
Adding a Printer ...........................................................2-10
USB Printer ..............................................................2-10
Parallel Printer ..........................................................2-10
Power Management
Overview ........................................................................3-1
The Power Sources .......................................... .... .... ......3-2
AC/DC Adapter .............. .............................................3-2
Battery .........................................................................3-2
Turning on the Computer ...............................................3-3
Power Plans ...................................................................3-4
Power-Saving States ......................................................3-6
Sleep ...........................................................................3-6
Hibernate ....................................................................3-7
Shut Down ..................................................................3-7
Configuring the Power Buttons .....................................3-8
Resuming Operation ...................................................3-9
Battery Information .....................................................3-10
Battery Power ........................................................... 3-10
Conserving Battery Power .........................................3-11
Battery Life ................................................................3-12
New Battery ..............................................................3-12
Recharging the Battery with the AC/DC Adapter .....3-12
Proper handling of the Battery Pack .........................3-13
Battery FAQ ..............................................................3-14
Drivers & Utilities
What to Install ............................................................... .4-1
Module Driver Installation ..........................................4-1
Driver Installation ..........................................................4-2
Updating/Reinstalling Individual Drivers ...................4-4
User Account Control (Win Vista) ..............................4-4
Windows Security Message .........................................4-4
New Hardware Found ..................................................4-4
Driver Installation Procedure .......................................4-5
Chipset ........................................................................ 4-5
Video ..........................................................................4-5
LAN ............................................................................4-5
Card Reader ......... .... ...................................................4-5
Touchpad ....................................................................4-5
Trusted Platform Module (TPM) ................................4-6
Fingerprint Reader ...................................................... 4-6
Hot Key Utility ...........................................................4-6
PC Camera (Optional) ................................................4 -6
Audio ..........................................................................4-7
Optional Drivers ..........................................................4-8
Bluetooth Module .......................................................4-8
Wireless LAN Module .............................................. .4-8
3.75G/HSPA Module .................................................4-8
XIV
Preface
BIOS Utilities
Overview ........................................................................5-1
The Power-On Self Test (POST) ................................... 5-2
Failing the POST .........................................................5-3
Fatal Errors .................................................................5-3
Non-Fatal Errors .........................................................5-3
The Setup Program .......................................... .... ..........5-4
Entering Setup ................................................... .... ......5-4
Setup Screens ......................................................... ......5-5
Main Menu .....................................................................5-6
System Time & Date (Main Menu) ...............................5-6
SATA Port1/2 (Main Menu) ..........................................5-7
System/Extended Memory: (Main Menu) .....................5-7
Advanced Menu .............................................................5-8
SIO ITE8305E Configuration (Advanced Menu) ..........5-8
Installed O/S (Advanced Menu) ....................................5-9
Legacy USB Support: (Advanced Menu) ......................5-9
Boot-time Diagnostic Screen (Advanced Menu) ...........5-9
Legacy OS Boot (Advanced Menu) ..............................5-9
Reset Configuration Data (Advanced Menu) ..............5-10
Power On Boot Beep (Advanced Menu) .....................5-10
Battery Low Alarm Beep (Advanced Menu) ...............5-10
Fan Control (Advanced Menu) ....................................5-10
Power Conserve Mode (Advanced Menu) ..................5-10
Security Menu ..............................................................5-11
Set Supervisor Password (Security Menu) ..................5-11
Set User Password (Security Menu) ............................5-12
Fixed disk boot sector (Security Menu) .......................5-12
Password on boot (Security Menu) ..............................5-12
TPM Support (Security Menu) ....................................5-13
TPM State ....................................................................5-14
Change TPM State (TPM State) .................................. 5-14
Boot Menu ...................................................................5-16
Exit Menu ....................................................................5-17
Upgrading The Computer
Overview ........................................................................6-1
When Not to Upgrade ..................................................6-2
Removing the Battery ....................................................6-3
Upgrading the Hard Disk Drive .....................................6-4
Upgrading the Optical (CD/DVD) Device ....................6-7
Upgrading the System Memory (RAM) ........................6-9
What to do if you Spill Liquid on the Computer .........6-11
Modules & Options
Overview ........................................................................7-1
Bluetooth Module .......................................................... 7 -2
Bluetooth Configuration in Windows Vista ...............7-3
Security Modules (TPM & Fingerprint) ........................7-6
Trusted Platform Module ...............................................7-7
XV
Preface
Enabling & Activating TPM ......................................7-7
Initializing TPM ..........................................................7-9
Infineon Security Platform Settings Tool ..................7-12
Fingerprint Reader Module ..........................................7-13
User Enrollment ................................................ .... ....7-14
Fingerprint Control Center Features .........................7-18
PC Camera Module ......................................................7-19
Wireless LAN Module .................................................7-26
802.11 b/g WLAN Driver Installation ......................7-27
Intel® Wi-Fi Link 5100/5300 Series (802.11 a/g/n)
Driver Installation .....................................................7-27
Intel® My WiFi Installation & Configuration ..........7-31
Intel® Wi-Fi Link 5100/5300 Series My WiFi
Driver Installation .....................................................7-32
3.75G/HSPA Module ...................................................7-44
USIM Card Installation .............................................7-46
3G Watcher Application ............................................7-48
3G Watcher Application Installation ........................7-48
Setting Up a Carrier Profile ......................................7-49
Short Messaging Service ..........................................7-54
HSPA Modem ...........................................................7-55
HSPA Modem Interface Installation ........................7-55
HSPA Modem Interface ...........................................7-56
Adding a Profile .......................................................7-58
Contacts .................................................................... 7-60
Messages ...................................................................7-61
Settings .....................................................................7-62
Mobile Partner ..................... .... ..................................7-64
Mobile Partner Application Installation ...................7-64
Mobile Partner Application ......................................7-65
Profile Management .................................................7-65
GPS Module .................................................................7-69
Troubleshooting
Overview ........................................................................8-1
Basic Hints and Tips ......................................................8-2
Backup and General Maintenance .................................8-3
Viruses ...........................................................................8-4
Upgrading and Adding New Hardware/Software .......... 8-5
Problems and Possible Solutions ...................................8-7
Screen Resolution Error ...............................................8-13
Interface (Ports & Jacks)
Notebook Ports and Jacks .............................................A-2
Intel Video Driver Controls
Intel Video Driver Installation ......................................B-1
Video .........................................................................B-1
Dynamic Video Memory Technology ........................B-1
Intel Graphics Properties ..............................................B-2
XVI
Preface
Scheme Options .......................................................... B-4
Attaching Other Displays .............................................B-5
Display Modes ..............................................................B-7
Windows XP Information
DVD Regional Codes ...................................................D-2
Windows XP Start Menu & Control Panel ...................D-3
Touchpad and Buttons/Mouse ......................................D-4
Function Keys & Visual Indicators ..............................D-5
Audio Features ..............................................................D-6
Video Features ..............................................................D-7
Intel GMA Driver Controls ..........................................D-9
Power Management Features ......................................D-16
The Power Sources .....................................................D-17
Turning on the Computer ............................................D-18
Power Schemes ...........................................................D-19
System Power Options ................................................D-21
Configuring the Power Button ....................................D-23
Battery Information ....................................................D-24
Driver Installation .......................................................D-28
Driver Installation Procedure ...................................D-30
Bluetooth Module ................. ......................................D-35
Security Modules (TPM & Fingerprint) ..................... D-40
Trusted Platform Module ............................................D-41
Enabling & Activating TPM ...................................D-41
Initializing TPM .......................................................D-43
Infineon Security Platform Settings Tool .................D-46
Fingerprint Reader Module .........................................D-47
PC Camera Module .....................................................D-53
WLAN Module ...........................................................D-59
3.75G/HSPA Module ..................................................D-62
XVII
Preface
XVIII
Quick Start Guide
Chapter 1: Quick Start Guide
Overview
This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the
computer and to getting your system started. The remainder of the manual covers the following:
• Chapter 2 A guide to using some of the main features of the computer e.g. the storage devices (hard disk,
optical device, 7-in-1 card reader, ExpressCard/34/54), Touchpad & Mouse, Audio Features,
Tablet PC Options & Printer.
• Chapter 3 The computer’s power saving options.
• Chapter 4 The installation of the drivers and utilities essential to the operation or improvement of some of the
computer’s subsystems.
• Chapter 5 An outline of the computer’s built-in software or BIOS (Basic Input Output System).
• Chapter 6 Instructions for upgrading your computer.
• Chapter 7 A quick guide to the computer’s Bluetooth, Wireless LAN, PC Camera, Fingerprint and 3.75G
modules (some of which may be optional depending on your purchase configuration).
• Chapter 8 A troubleshooting guide.
• Appendix A Definitions of the interface, ports/jacks which allow your computer to communicate with external
devices.
• Appendix B Information on the Intel Video driver controls.
• Appendix C The computer’s specifications.
• Appendix D Information on the Windows XP OS.
1
Overview 1 - 1
1
Quick Start Guide
Introduction
This wide screen tough notebook computer provides an ideal platform for mobile computer use with a magnesium alloy case to help provide resistance to shocks, bump and drops, an anti-shock mounting design to protect
the hard disk and LCD screen from damage and a spill resistant keyboard (water resistant to100 cc) and case design preventing spills (see “What to do if you Spill Liquid on the Computer” on page 6 - 11 for details) from
leaking into the sensitive interior.
LED Backlight LCD
The LED Backlight LCD on this computer model allows for greater color quality, and consumes less power than
conventional fluorescent LCDs and can therefore save significant battery life. In addition the LED backlit LCD
allows for clearer reading in bright conditions.
1 - 2 Introduction
Quick Start Guide
Advanced Users
If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful
to refer to “What to Install” on page 4 - 1, “BIOS Utilities” on page 5 - 1 and “Upgrading The Computer” on
page 6 - 1 in the remainder of this User’s Manual. You may also find the note s marked wi th a
of interest to
you.
Beginners and Not-So-Advanced Users
If you are new to computers (or do not have an advanced knowledge of them) then
the information contained in this Quick Start Guide should be enough to get you up
and running. Eventually you should try to look through all the documentation (more
detailed descriptions of the functions, setup and system controls are covered in the
remainder of the User’s Manual), but do not worry if you do not understand everything the first time. Keep this manual nearby and refer to it to learn as you go. You
may find it useful to refer to the notes marked with a
as indicated in the margin.
Check the light colored
boxes with the mark
above to find detailed information about the computer’s features.
Notes
For a more detailed description of any of the interface ports and jacks see “Interface
(Ports & Jacks)” on page A - 1.
Warning Boxes
No matter what your level please pay careful attention to the warning and safety information indicated by the
symbol. Also please note the safety and handling instructions as indicated in the Preface.
1
Introduction 1 - 3
1
Quick Start Guide
Not Included
Operating Systems (e.g. Windows Vista/Windows XP) and applications (e.g. word processing, spreadsheet and
database programs) have their own manuals, so please consult the appropriate manuals.
Drivers
If you are installing new system software, or are re-configuring your computer for a different system, you will need to install
the drivers listed in Table 4 - 1, on page 4 - 3. Drivers are programs which act as an interface between the computer and a
hardware component e.g. a wireless network modul e. It i s very i mp ortant that you instal l the drivers in the orde r listed . Yo u
will be unable to use most advanced controls until the necessary drivers and utili ties are properly installed. If your system
hasn’t been properly configured (your service representative may have already done that for you); refer to Chapter 4 for installation instructions.
Ports and Jacks
See “Notebook Ports and J acks” on page A - 2 for a description of the interface (ports & jacks) which allow your computer
to communicate with external devices, connect to the internet etc.
1 - 4 Introduction
Quick Start Guide
System Software
Your computer may already come with system software pre-installed. Where this is not the case, or where you
are re-configuring your computer for a different system, you will find the following operating systems are supported.
Operating System & Version Supported Note
1
*Windows XP Home or Professional Editions
(with Service Pack 3)
Windows Vista Home Basic/Home Premium/Business/
Enterprise/Ultimate Editions
(with Service Pack 1)
Table 1 - 1 - Operating Systems Supported
In order to run Windows XP without limitations or decreased
performance, your computer requires a minimum 512MB of
system memory (RAM)
Note that Windows Vista Home Basic Edition supports
only limited Tablet PC functions.
In order to run Windows Vista without limitations or
decreased performance, your computer requires a minimum
*Note: For information on the Windows XP OS (specifically power, video and driver information) see “Win-
dows XP Information” on page D - 1.
Introduction 1 - 5
1
Quick Start Guide
System Startup
1. Remove all packing materials and place the computer on a stable surface.
2. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3. Attach the AC/DC adapter to the DC-In jack on the left of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter.
4. Pull the carrying handle out to easily access the latch. use one hand to push the LCD latch up and forward to unlock
it, and carefully raise the lid/LCD to a comfortable viewing angle while using the other hand (as illustrated in
- 1
below) to support the base of the computer (
5. Press the power button and then release it to turn the computer “on”.
Note: Never
Shutdown
lift the computer by the lid/LCD).
Figure 1
Note that you should always shut your computer down by choosing the Shut Down command from the Lock Button Menu
in Windows Vista. This will help prevent hard disk or system problems.
Figure 1 - 1 - Opening the Lid/LCD/Computer with AC/DC Adapter Plugged-In
1 - 6 System Startup
Quick Start Guide
Operating System Setup
If you are installing new system software, or are re-configuring your computer for a different system, make sure you
configure the appropriate OS setting in the BIOS before installing a new operating system.
1. Start-up the computer and press <F2> to enter the BIOS.
2. Go to the Advanced menu, select “Installed O/S” and make sure the appropriate operating system is selected.
3. Go to the Exit menu and select “Exit Saving Changes” (or press F10 and select “Yes” then press Enter) and
press Enter to exit the BIOS and reboot the computer.
Main AAdvanced Security Boot Exit
Advanced Chipset Control
Installed O/S: [Vista]
SATA Mode Selection: [AHCI]
DFOROM(Robson) Support: [Enabled]
Reset Configuration Data: [No]
Boot-time Diagnostic Screen: [Disabled]
Legacy OS Boot: [Enabled]
Power On Boot Beep [Disabled]
Battery Low Alarm Beep: [Disabled]
FAN Control: [Automatic]
Phoenix SecureCore(tm) Setup Utility
Advanced
Item Specific Help
Select options for
Advanced Chipset
features.
1
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1 - 2 - BIOS (Operating System Selection)
Operating System Setup 1 - 7
1
Quick Start Guide
System Map: LCD Panel Open
Figure 1 - 3
LCD Panel Open
1. LCD Latch
2. Built-In PC Camera
(Optional)
3. LCD
4. Power Button
5. Keyboard
6. Fingerprint Reader
Module
7. Touchpad &
Buttons
8. Built-In Microphone
9. LED Indicators
10. Carrying Handle
Wireless Device
Operation Aboard
Aircraft
The use of any portable electronic transmission devices aboard
aircraft is usually prohibited.
Make sure the module(s) are
OFF if you are using the computer aboard aircraft.
Use the function key combinations to toggle power to the
3.75G/WLAN/Bluetooth modules, and check the LED indicator icon to see if the modules are
powered on or not (see Table 1 -
3, on page 1 - 11/Table 1 - 2, on
page 1 - 9).
1
2
3
4
5
8
6
7
9
10
1 - 8 System Map: LCD Panel Open
Quick Start Guide
LED Indicators
The LED indicators on the computer display helpful information about the current status of the computer.
Icon Color Description
Orange DC Power is Plugged In
Green The Computer is On
Blinking Green The Computer is in Sleep Mode
Orange The Battery is Charging
Green The Battery is Fully Charged
Blinking Orange The Battery Has Reached Critica lly Low Power Status
Green Hard Disk Activity
Green The (optional) Wireless LAN Module is Powered On
Orange The (optional) Bluetooth Module is Powered On
Green Number Lock Activated
1
Green Caps Lock Activated
Table 1 - 2 - LED Power & Communication Indicators
System Map: LCD Panel Open 1 - 9
1
Quick Start Guide
Keyboard
The keyboard has a numerical keypad for easy numeric data input, and features function keys to allow you to
change operational features instantly (see Figure 1 - 4). See Table 1 - 3, on page 1 - 11 for details of the function/
hot key indicators.
Play/Pause Key
Fn Key
Function Keys
Numerical
Keypad
NumLk &
ScrLk Keys
3.75G Module
Power
Toggle Key
Special Characters
Some software applications allow the
number-keys to be used with Alt to produce special characters. These special
characters can only be produced by using the numeric keypad. Regular number
keys (in the upper row of the keyboard)
will not work. Make sure that NumLk is
on.
Figure 1 - 4 - Keyboard
Other Keyboards
If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will
detect and enable it automatically. However special functions/hot-keys uniqu e to the system’s regular keyboard may not
work.
1 - 10 Keyboard
Loading...