Euro CB Supertooth II User Manual

1

User Guide

Supertooth II

Universal Bluetooth Handsfree Kit with DSP

Contents

____________________________________________________________

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Switching On/Off. . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Pairing to a Mobile Phone . . . . . . . . . . . . . . . . . . . . . . .3

Indicator Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Hands-free Profile . . . . . . . . . . . . . . . . . . . . . . . . . . .4

SuperTooth II Operations. . . . . . . . . . . . . . . . . . . . . .4

Button Functions Matrix . . . . . . . . . . . . . . . . . . . . . .5

Headset Profile. . . . . . . . . . . . . . . . . . . . . . . . . .6

SuperTooth II Operations. . . . . . . . . . . . . . . . . . . . . .6

Button Functions Matrix . . . . . . . . . . . . . . . . . . . . . .7

SuperTooth II is equipped with Bluetooth and Digital Signal Processor
which allow wireless communications on devices such as cellular phones.

This is designed to be a totally portable wireless handsfree kit which will
enable the user to communicate freely without holding the phone. This will
work on any Bluetooth cellular phones available provided that they respect
the Bluetooth protocol.

1 Swivel Arm
2 Reject Button
3 Headphone Jack
4 Speaker
5 Charger Input
6 Accept / End Button
7 Microphone
8 Bluetooth Indicator
9 Charge Indicator
10 Volume Control

A. PRODUCT OVERVIEW

2

Note: The Swivel Arm[1] can be adjusted to 0º , 55º and 210º orientations.

Power on: Flip up the Swivel Arm [1] from 0º to 55º to 210º
positions. The Bluetooth indicator[8] will glow (blue blink). This
indicates that the kit is ready (standby mode). Note: At first use, the

user has to pair SuperTooth II with his phone (refer to Section E
PAIRING TO A MOBILE PHONE.)

Power off: Flip down the Swivel Arm to 0º position. The Bluetooth
Indicator will become red then turns off after a second.

1. Plug the battery charger connector into the Charger Input [5] of
SuperTooth II.

2. Plug the other end of the charger into the electrical outlet.

Fixing of Clip

Fix the metal clip of SuperTooth II on the sun
visor.

Sun visor

Attach the magnetic back of SuperTooth II to
the fixed metal clip. The SuperTooth must be
placed wherein its microphone will be directed
to the mouth of the user.

The position of the SuperTooth II can vary
according to the position of the sun visor. The
Swivel Arm(1) can be adjusted to 0º, 55º
and 210 º orientations.

B. SWITCHING ON/OFF

C. CHARGING

D. INSTALLATION

3

Pairing will create a link or connection between the two Bluetooth devices,
the SuperTooth II and your phone.

1. Bring the mobile phone at about 20cm from the SuperTooth II.

2. The SuperTooth II is initially off; Turn it on by flipping
up the Swivel Arm[1] to 55º position. The Bluetooth
Indicator[8] will glow (blue blink).

3. Simultaneously press the Reject Button[2] and
Accept/End Button[6] for about 5 seconds. A
distinctive tone will be heard and the Bluetooth
Indicator LED will change from blinking blue to
alternate blinking red and blue. The SuperTooth II

is now in Pairing Mode.

4. While the kit is at pairing mode, access the Bluetooth menu of your
phone. (Kindly refer to your phone’s manual.) Turn on its Bluetooth
function then execute a Bluetooth search so that it will be able to search
and find your SuperTooth II.

5. When the phone displays the list of the Bluetooth devices it found,
select the name of this kit (SuperTooth II).

6. When the phone asks for the passcode, enter 0000. Pairing is
successful if the alternating red/blue lights of Bluetooth Indicator
changes to plain blinking blue. Note : Normally, the phone would also

show briefly on its display if it’s already paired and connected to
the SuperTooth II or if pairing with it failed.

Important Note: Some phones do not connect directly after entering

0000. To connect, you need to short press the Accept / End Button[6].

Or,

(In your phone) Go back to Bluetooth> Paired devices> highlight the

name of this kit (SuperTooth II) > press Options > then press
Connect).

If pairing has been successful, the SuperTooth II is now ready to use.

E. PAIRING TO A MOBILE PHONE (not possible while charging the SuperTooth II)