Euro Audio Team EAT E-glo S Owner's Manual

EAT E-Glo S

Phono Preamplifier

Owner´s Guide

Thank You for choosing EAT. Please take a few moments to review this manual so you may
enjoy all the benefits of your new E-Glo S phono preamplifier.

IMPORTANT SAFETY INSTRUCTIONS

- Read all the safety and operating instructions before operating this product. Retain safety
and operating instructions for future reference.

- Avoid letting liquids enter the device or the power supply. Never place any item containing
liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the
power supply. Never place any naked flame sources, such as lighted candles on or near the
device. The product shall not be used in damp or wet locations, next to a bathtub, sink,
swimming pool or any other similar conditions.

- The product should be situated away from heat sources such as radiators, heat registers,
stoves and other products that produce heat.

- Do not attempt to repair or service this product yourself. Opening or removing covers may
expose you to dangerous voltage and other hazard. Refer all servicing to qualified service
personnel.

- Never push objects of any kind into this product through any openings. They may touch
dangerous voltage points or short out parts that could result in fire or electric shock.

- Do not block ventilation slots or heatsinks.

- Unplug this product during lightning storms or when unused for long periods of time.

- Always disconnect your entire system from the AC mains before conecting or disconnecting
any cables or when cleaning any component.

Unpacking

The EAT E-Glo S phono preamplifier should be removed from its box with care.We suggest that you
keep all of the original packaging, storing it in a safe, dry place in the event that you´re required to
transport this product.