Euro Appliances EA900WFBL User Manual
refrigeration
EA900WFSX2
EA90SDSX
EA900WFBL
EA900WSDB
EMBRACE EUROPEAN QUALI+PASSION
www. eu roa ppli a nces.com .au
Wa
rning
Th
e information in this document is subject to modification without any prior notice.
This beverage cooler is an outdoor appliance. This appliance is intended
for household use only. It is designed to be used in sheltered areas only
and must not be exposed to the elements. It can be installed in an
alfresco area in accordance with the following:
• Unit must not be exposed to direct sunlight, rain, moisture or dust.
• Do not install in a location where winds may blow water or dust on to the
beverage cooler.
• The appliance must not be operated or left out in the weather.
• Do not expose the outdoor appliance to rain or wet conditions.
This beverage cooler should only be use for the storage of beverages. It must
not be used to store food.
Euro Appliances offers no guarantee for our beverage cooler if it is being used
for any purpose other than that for which it was specially designed. Euro
Appliances is not responsible or liable for any spoilage or damage to beverages
or any other contents incidental or consequential to possible defects of the
beverage cooler. Warranty applies to the beverage cooler only and not to the
contents of the beverage cooler.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
Children should be supervised to ensure they do not play with the appliance.
Allow 24 hours before switching on the beverage cooler. During this time we
recommend that you leave the door open to clear any residual odours.
The appliance is intended to be used in household and similar applications such
as:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses and by clients in hotels, motels and other residential type
environments;
- Bed and breakfast type environments;
- Catering and similar non-retail applications.
Before loading & plugging in the beverage cooler, we recommend that the
location you select for your beverage cooler should:
- Be unencumbered and well ventilated;
- Be well away from any heat source and direct sunlight or rain;
- Not be too damp (laundry, pantry, bathroom, garage and basement etc.);
- Have a flat, level and dry floor;
- Have a standard and reliable electricity supply (10A General purpose outlet
properly earthed). It is not recommended to use a multi-socket or extension
lead;
- Have a surge protector fitted to the electrical outlet.
- Away from microwave. Certain microwave ovens do not have wave interference
shield. When placed within 1 meter of the beverage cooler, they may affect the
operation of the beverage cooler. Always ensure the outdoor display fridge is
kept at the correct settings for the required operation of the appliance.
The beverage cooler should be placed where the ambient temperature is
between 2 ºC to 40 ºC. If the ambient temperature is above or below this range,
the performance of the unit may be affected. Placing your unit in extreme cold
or hot conditions may cause interior temperatures to fluctuate and the ideal
range of temperature may not be reached.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-
in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: This product should not be disposed by the customers, please
contact your local authorities and ask for the correct method of disposal.
Incorrect disposal may expose the user to injury from sharp objects, flammable
gases or cause environmental damage
*Grounding Instructions
The beverage cooler must be grounded in case of an electrical short circuit.
Grounding reduces the risk of electrical shock. The beverage cooler is equipped
with a power cord having a grounding wire and plug. The beverage cooler plug
must be plugged into properly installed and grounded electrical outlet. In
locations where there is frequent lightning, it is advisable to use surge
protectors.
Improper use of the grounding plug can result in the risk of electric shock.
Consult a qualified electrician or service person if the grounding instructions are
not completely understood.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
*Installing your beverage cooler
Unpack and remove all of the protection and adhesive strips from the packaging
around and inside the beverage cooler.
Important: Before connecting the unit to
a power source, please let it stand upright for approximately 24 hours. This will
reduce the possibility of a malfunction in the cooling system from handling
during transportation.
The beverage cooler must be positioned so that the plug is accessible.
Release the power cord and move your beverage cooler to the selected
location. The beverage cooler should be installed in a suitable place where the
compressor will not be subject to physical contact.
Note: For freestanding installation, the beverage cooler requires 30mm gap on
both sides as well as the rear. This allows the proper air circulation to cool the
compressor and condenser. For built-in installation, the beverage cooler
requires 10mm space on each side and at the top as well as 30mm space at
the rear. The air vent at the front must never be covered or blocked in any way.
*Levelling your beverage cooler
Beverage cooler must be levelled before loading your beverages. Your
beverage cooler is equipped with 4 adjustable feet to facilitate easy levelling.
Loading...