• Mirror polished stainless steel interior
• R600a refrigerant ozone friendly
• Temperature control protective cover
• Separate internal light
• Double chrome adjustable shelves
• Quiet compressor with front airflow system
• Recirculating internal fan
Code EA60WFBR
This beverage cooler is not an outdoor
can be installed in an
alfresco area in accordance with the following:
Do not install in a location where winds may blow water or dust
0 – 10 DEGREES ELECTRONIC TEMPERATURE CONTROL
This beverage cooler allows you to control the temperature of your beverages.
DOUBLE GLAZED DOORS WITH LOW
Ensuring maximum cool temperature
equipped with low E glass panel which can efficiently prevent direct sun
This internal fan helps distribute the chilled air evenly inside the beverage cooler,
keeping the drinks at an even temperature.
bringing european quality to your home
0 – 10 degrees electronic
Chrome adjustable
138L Single Glass Door Beverage Cooler
Full matte finish black exterior
– 10 degrees electronic temperature control
Double glazed door with low E glass panel
Spring back door
ge opening
E GLASS PANEL
s inside the unit, this beverage cooler is
light enters
handle up to 70% humidity in 38 degree or 75% in 30 degrees
AN
Approx. x132 standard 375ml cans
ELECTRICAL REQUIREMENTS:
Unit is supplied with 10-amp plug & cord.
POWER INPUT:
182W
ENERGY CONSUMPTION:
0.83 kWh / 24h
NOISE LEVEL:
45 Decibel Rating
WEIGHT:
54.0kg (net)
temperature control
Internal light
shelves
Recirculating internal fan
PRODUCT DIMENSIONS
600mm width x 840mm height x 500mm depth
(Door handle extra 45mm depth)
IMPORTANT INFORMATION
appliance. It
• Unit must not be exposed to direct sunlight, rain, moisture or
dust.
•
on to the beverage cooler.