EURO PR32C Instruction Manual / Installation Manual

Ceramic Hob

Instruction Manual / Installation Manual

MODEL: PR32C

2

Congratulations on the purchase of your new Ceramic Hob.

We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand how to install correctly and operate it.
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.

Product Overview

Top View

Control Panel

1. max. 1800 W zone

2. max. 1200 W zone

3. Glass plate

4. ON / OFF

5. Control panel

1. ON/OFF control

2. Power / Timer regulating controls

3. Heating zone selection controls

4. Timer control

5. keylock control

3

Product Information

The microcomputer ceramic cooker hob can meet different kinds of cuisine
demands because of resistance wire heating, micro-computerized control and
multi-power selection, really the optimal choice for modern families.
The ceramic cooker hob centers on customers and adopts personalized design.
The hob has safe and reliable performances, making your life comfortable and
enabling to fully enjoy the pleasure from life.

Before using your New Ceramic Hob

• Read this guide, taking special note of the ‘Safety Warnings’ section.

• Remove any protective film that may still be on your ceramic hob.

Using the Touch Controls

• The controls respond to touch, so you don’t need to apply any pressure.

• Use the ball of your finger, not its tip.

• You will hear a beep each time a touch is registered.

• Make sure the controls are always clean, dry, and that there is no object (e.g. a

utensil or a cloth) covering them. Even a thin film of water may make the
controls difficult to operate.

4

Choosing the right Cookware

Do not use cookware with jagged edges or a curved base.

Make sure that the base of your pan is smooth, sits flat against the glass, and is
the same size as the cooking zone. Always centre your pan on the cooking zone.

Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.

5

Using your Ceramic Hob

To start cooking

• After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the ceramic hob has entered the state of standby
mode.

1. Touch the ON/OFF control. all the indicators

show “-“

2. Place a suitable pan on the cooking zone that
you wish to use.

• Make sure the bottom of the pan and the surface

Of the cooking zone are clean and dry.

3. Touching the heating zone selection control

6

4. Select a heat setting by touching the “-“ or

“+” control.

• If you don’t choose a heat setting within 1

minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.

• You can modify the heat setting at any time

during cooking.

• By holding down either of these buttons, the

value will adjust up or down.

When you have finished cooking

1. Touching the heating zone selection
control that you wish to switch off

2. Turn the cooking zone off by scrolling down to “ 0 “ or touching “-“ and

”+” control together.

3. Turn the whole cooktop off by touching the ON/OFF control.