Eureka! Tents AS1000 User Manual

T

O

O

L

S

F

L

O

O

R

S

S

WAND

11

WAND

22

!

T

O

O

L

S

F

L

O

O

R

S

!

WAND

WAND

2

1

TEP

1

1

QUICK START GUIDE

THANK YOU FOR PURCHASING YOUR NEW EUREKA VACUUM!

Please take a few moments to read this Quick Start Guide. It is designed
to help you assemble your vacuum easily.

To view our “How to Assemble” demo, visit www.eureka.com/airspeed/assembly

If you have questions about your new vacuum, please contact our
customer service helpline at 1

Helpline Hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday

What’s in the carton

-800-282-2886

AS1000 Series

. We’re here to help!

No screws
or tools
required!

STEP

2

2

Follow
1-12

in order

to ensure
proper

S

N

TIO

A

TR

IS

G

E

R

Handle

Dust

cup

Vacuum cleaner

WNER’

O

UIDE

G

Important Safeguards

Easy assembly

1

2

Hose

Extra belt

Carry handle

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

Moving parts! Assemble the vacuum cleaner before using.

3 5

4

A

Turbo nozzle

Turbo holder

S

Dusting

brush

Filter cleaning

brush

B

nap!

C

Crevice

Lower hose

retainer

tool

A

B

Hose release wand A

and wand B

Upper hose

retainer

6

assembly.

STEP

3

3

Power

Remove dust cup. Place handle on

vacuum; push down

to snap in place.

7

To install hose connector,

align tab at right and

snap on at left.

8

Pull out bottom of lower hose

retainer and position hose.

Slide carry handle into back of

handle. Snap into place.

9

Place hose over

upper hose retainer.

Get ready to vacuum

Insert top tab of turbo holder into handle.

Place thumbs on each side and snap

bottom corners into place. Turn knob to lock.

Place lower hose retainer

in slots on back of vacuum.

Push down past rib.

10 11 12

A

B

Push A onto end of hose;
slide B over A. Place over

bottom hook; snap in at top.

Push cord into carry handle

and upper cord retainer.

Wrap cord.

Air path

knob

Place upper hose retainer

on back of handle.

Push up to snap into place.

Place dust cup on vacuum.

Push back to latch.

switch is
marked

on-off.

Empty dust
cup after
each use.

I

for

STEP

4

4

To vacuum floors, turn

air path knob to ‘floors.’

Adjust height for

carpet or bare floors.

Step on power switch to turn

on; step on again to turn off.

Clean and assemble dust cup

Pull back latch to lift off lid.

For quick clean: tap filter. To clean thoroughly: grasp filter

and twist to remove from lid. Brush off debris.

Step on handle release to
lower handle into position.

Remove screen. Rinse screen,

filter and dust cup. Dry thoroughly.

Attach tool to end of wand. Turn air path knob to ‘tools.’ Store

tools on carry handle and turbo nozzle in holder.

Align tab with slot to reinstall screen. Grasp filter and twist in lid

to reinstall. Align lid at front; press down until lid snaps.