Eureka! Tents 4750 User Manual

Page 1
Before Returning, Call
Eureka Customer Service
Antes de enviar de regreso, Ilame al Servico al Cliente de Eureka
Avant de le retourner, appelez le service à la clientèle Eureka
HELPLINE LÍNEA DE AYUDA LIGNE D’AIDE
1-800-282-2886
8 a.m. to 7:30 p.m. (CST), Monday - Friday
8 a.m. a 7:30 p.m. (CST), de Lunes a Viernes
10 a.m. a 6:30 p.m. (CST), Sábado y Domingo
8 h à 19 h 30 (CST), lundi au vendredi
10 h à 18 h 30 (CST), samedi et dimanche
www.eureka.com
LLe
e
G
G
u
uii
d
d
e
e
d
d
u
u
P
Prr
o
o
p
prrii
é
étt
a
aiirr
e
e
GGuuííaa ddeell DDuueeñño
o
T
h
a
n
k
y
o
u
f
o
r
p
u
r
c
h
a
s
i
n
g
y
o
u
r
n
e
w
E
u
r
e
k
a
V
a
c
u
u
m
!
¡
G
r
a
c
i
a
s
p
o
r
l
a
c
o
m
p
r
a
d
e
s
u
n
u
e
v
a
a
s
p
i
r
a
d
o
r
a
E
u
r
e
k
a
!
M
e
r
c
i
d
'
a
v
o
i
r
a
c
h
e
t
é
v
o
t
r
e
n
o
u
v
e
l
a
s
p
i
r
a
t
e
u
r
E
u
r
e
k
a
!
Upright Vacuum Cleaner
Household Type
Aspiradora Vertical
Tipo demestico
Aspirateur vertical de type résidentiel
© 2009 Electrolux Home Care Products, Inc. Printed in China PN81157
O
O
W
W
N
N
E
E
R
R’’
S
S
G
G
U
UII
D
D
E
E
4750 Series
PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 1
Page 2
Where to Find Important Vacuum Information
Keep this information
Write the model, type and serial number here:
Date of purchase (keep your receipt) _______________
Model number and type _________________________
Serial number _________________________________
Find these numbers on a label on the lower back side of the vacuum cleaner. Refer to these numbers when ordering parts and accessories or if service is needed.
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
Table of Contents
Important Safeguards
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
How to Identify Parts of Vacuum Cleaner
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Maintenance Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Disposable dust bag and filter.
How to Use Accessories
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Crevice tool, extension wand, dusting brush, Power Paw®and stair hose.
How to Maintain Your Vacuum Cleaner
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Maintain brush roll, replace brush roll or EXT-U belt, and change light bulb.
How to Clear a Blockage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hose blockages.
Eureka Limited Warranty Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Thermal Cut-Off and Problem Solving
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Spanish Owner’s Guide
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-13
French Owner’s Guide
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-20
Order Forms and Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-22
Before You Start Your Vacuum Cleaner
Refer to Quick Start Guide for assembly and use.This Owner’s Guide provides
important instructions to prolong the life of your Eureka vacuum cleaner.
Inspection
Carefully unpack and inspect your new Eureka vacuum cleaner for shipping damage. Each unit is tested and thoroughly inspected before shipping. For instructions regarding any shipping damage, call Eureka Customer Service HELPLINE 1-800-282-2886 immediately.
Follow caution information wherever you see this symbol.
!
PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 2
Page 3
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com 1
ENGLISH
To reduce the risk of fire, electric shock, or injury:
• Do not use outdoors or on wet surfaces.
Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the
electrical cord when not in use and before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.
• Do not pull or carry by cord. Do not use cord as a handle. Do not close a door on cord or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• This vacuum cleaner creates suction and contains a revolving brush roll. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not place vacuum cleaner on furniture or stairs as the brush roll may cause damage. Use extra care when cleaning stairs. Place vacuum cleaner on floor with the handle in storage position while using attachments.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without disposable dust bag and motor filter in place.
• Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.
• Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.
• Store your vacuum cleaner indoors in a cool, dry area.
• Keep your work area well lighted.
• Unplug electrical appliances before vacuuming them.
• Unplug before connecting Turbo Nozzle.
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
!
SAVE THESE INSTRUCTIONS
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
WARNING
IMPORTANT SAFEGUARDS
Motor
Do Not Oil the motor or the brush roll at any time. The bearings are permanently lubricated
and sealed.
PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 3
Page 4
Maintenance Information
Maintenance information is also located on back side of dust cup lid.
2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
DISPOSABLE DUST BAG style PL – Check regularly; replace as needed
PRE-MOTOR FILTER – clean or replace monthly
BRUSH ROLL – Clean Monthly
EXT-U BELT – Replace a worn, cut or out of shape belt
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using. Do not use the vacuum cleaner without disposable dust bag and motor filter in place.
How to Identify Parts of Vacuum Cleaner
Disposable
bag style PL
Pre-motor
filter
EXT-U Belt
Brush Roll
Handle with Power Paw
®
(available on
some models)
Handle
Hose
Stair carrying handle
Dust cup latch
Bag view window
Lower
cord
retainer
Nested crevice tool & extension wand
Pre-motor filter
(behind dust cup)
Power switch Handle release
Belt view window
Dust cup
Disposible dust bag
(
inside dust cup)
Headlight
(available on some models)
Brush roll cover
Upper cord retainer
Hose support Power cord
Dusting brush Carrying handle
& cord wrap
Hose connector
Bottom cord wrap
Hose retainer
Position holes in cardboard
collar over posts in cup.
Twist cover counter-
clockwise and lift off.
Lift out old bag
and discard.
Line up dust cup cover;
twist clockwise to lock.
Place new bag
inside dust cup.
Reinstall filter and frame;
replace dust cup.
Shake dust off filter;
rinse and dry thoroughly.
Remove dust cup; take off
frame and filter.
Pull up latch and
remove dust cu
p.
PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 4
Page 5
3
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
ENGLISH
Dusting Brush
Use for furniture, drapes, blinds, bookshelves, lampshades and vents.
1) Remove hose from hose retainer on back of vacuum.
2) Place dusting brush on end of hose, wand or crevice tool.
Power Paw
®
(with some models or available for purchase)
Stair Hose
(available for purchase)
Use for furniture and stairs.
Make sure vacuum is below you, pushed against the bottom step.
1) If model has additional stair hose, attach to end of hose.
2) Attach Power Paw to the end of wand or hose.
Make sure you turn off vacuum before removing debris from Power Paw.
The Power Paw name is a registered trademark of Electrolux Home Care Products, Inc.
Combination Crevice Tool and Extension Wand
Use for baseboards, corners and between cushions.
1) Loosen hose end from vacuum base.
2) Grasp crevice tool near ridges and pull apart.
3) Turn ridge end to center.
4) Push crevice tool into wand and place on end of hose.
Handle must be in upright position to ensure that brush roll is lifted off the floor.
Replace hose end into opening on vacuum base after using accessories.
!
How to Use Accessories
PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 5
Page 6
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
4
How to Maintain Your Vacuum Cleaner
Make sure vacuum cleaner is turned off and power cord is unplugged
1) Remove 2 screws from lens cover (Fig. 7).
2) Remove lens cover and old bulb. Replace with blub rated 12v., 10w., Type 904.
3) Push in new bulb (Fig.8). Make certain bulb will not touch lens cover.
4) Replace lens cover and 2 screws.
Change Light Bulb (on some models)
Make sure vacuum is turned off and power cord is unplugged.
How to replace brush roll or belt
1) Use handle release to lower handle flat onto floor (Fig. 1).
2) Remove 2 screws from the front side of brush roll cover (Fig. 2).
3) Lift and remove brush roll cover (Fig. 3).
4) Remove brush roll and belt. Thread new belt around motor shaft and right end of brush roll (Fig. 4).
5) Pull right side of brush roll to stretch belt. Secure right end cap into base (Fig. 5). Align left end cap with square in base and push into place.
6) Rotate brush roll 2 turns to center belt.
7) Replace brush roll cover and 2 screws (Fig. 2).
8) Check belt view window to see if white dots on belt are moving. This indicates brush roll is turning (Fig. 6).
Check EXT-U Belt. Replace if worn, cut or out of shape
Avoid touching the motor shaft when checking brush roll or belt.
!
! !
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 1
Maintain Brush Roll
Motor can become hot with normal use.
Do not remove end caps. Remove hair and threads from brush roll periodically.
Fig. 8
PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 6
Page 7
ENGLISH
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
5
The Eureka Limited Warranty
Eureka warrants this vacuum cleaner to be free from defects in material and workmanship for a term of one year for normal household use. Warranty is granted only to the original purchaser and members of immediate household.
This warranty is good for one year from the date of purchase only when the vacuum cleaner is used in the accordance with Eureka operating instructions.
TThhiiss WWaarrrraannttyy DDooeess NNoott CCoovveer
r
• Parts of the vacuum that require replacement under normal use such as disposable dust bags, filters, drive belts, light bulbs, brush roll, bristles, impellers and cleaning.
• Damages or malfunctions caused by negligence, abuse, and use not in accordance with the Owner’s Guide.
• Defects or damages caused by unauthorized service or the use of other than Genuine Eureka, ARM & HAMMER
TM
and Filtrete
TM
by 3M parts.
What Eureka Will Do
Eureka will, at its option, repair or replace a defective vacuum or vacuum part that is covered by this warranty. As a matter of warranty policy, Eureka will not refund
the consumer’s purchase price.
Warranty Registration
Please fill out and return the warranty registration card accompanying your vacuum.
Obtaining Warranty Service
To obtain warranty service you must return the vacuum or vacuum part along with “proof of purchase” to any Eureka Authorized Warranty Station. For Eureka
Authorized Warranty Station or Service Information, visit
www.eureka.com, write or telephone toll free:
Obtaining Warranty Service Outside Your Community
You must pay the shipping charges to the Eureka Authorized Warranty Station.
Return Shipping Charges will be paid by the Warranty Station. When returning parts for repair, please include the model, type and serial number located on the rating plate on the lower backside of the vacuum.
Further Limitations and Exclusions
Any warranty that may be implied in connection with your purchase or use of the vacuum, including any warranty of Merchantability or any warranty for Fitness For A Particular Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall the manufacturer be liable for any consequential or incidental damages you may incur in connection with your purchase or use of the vacuum. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may
also have other rights, which may vary by state.
The ARM & HAMMER name is a trademark of Church and Dwight Co., Inc. 3M and Filtrete are trademarks of 3M Company, used by Electrolux Home Care
Products, Inc. under license.
USA: 1-800-282-2886
Electrolux Home Care North America Service Division P.O. Box 3900 Peoria, IL 61612
Mexico: (55) 5343-384
Electrolux Home Care
Canada: 1-800-282-2886
Electrolux Home Care North America Service Division 5855 Terr y Fox Way Mississauga, Ontario L5V 3E4
1) Loosen lower end of hose and pull hose retainer out to remove hose. Flex hose to loosen any blockage. If still clogged, remove 2 screws and remove hose from vacuum back (Fig. 1). Reconnect hose at both ends.
2) To check base hose, remove 2 screws and brush roll cover. Use finger to clear blockage (Fig. 2).
3) Clear debris from brush roll area. Replace cover and 2 screws.
!
How to Clear a Blockage
Make sure vacuum is turned off and power cord is unplugged.
Fig. 1 Fig. 2
PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 7
Page 8
6
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
Thermal Cut-Off
This vacuum cleaner has a special thermostat that protects the vacuum in case of motor overheating. If the vacuum suddenly shuts off, push the power switch to off and unplug the vacuum. Check the vacuum for a possible source of overheating such as a full dust cup bag, blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum. After the 30 minute period, plug the vacuum back in and turn on the switch. If the vacuum still does not work, take it to a Eureka authorized service center for repair or call 1-800-282-2886.
Problem Solving
Problem Cause
Solution
Motor will not start.
Power plug
• Push plug securely into outlet.
• Try another outlet.
• Check circuit breaker.
Vacuum does not clean carpet.
Dust bag and filter
• Replace dust bag; clean and/or change filter.
• If picking up fine dust, the dust bag may not look full, but a fine substance tends to reduce suction when it blocks air flow through the filter. Refer to page 2 for filter maintenance. Make sure filter and dust bag are installed properly.
No suction at the end of hose.
Dust bag and filter
Filter
Hose
• Replace dust bag; clean and/or change filter.
• If picking up fine dust, the dust bag may not look full, but a fine substance tends to reduce suction when it blocks air flow through the filter. Refer to page 2 for filter maintenance. Make sure filter and dust bag are installed properly.
• (Located above the dust cup). Check & clean debris to maintain
full air flow. Page 2
• Remove clogs from the hose that restrict the airflow.
Make sure hose end is replaced into opening on vacuum base.
Vacuum is hard to push.
Belt
• Replace a worn, cut or out of shape belt. Page 4
Burning smell; brush roll will not turn.
Belt
• Check brush roll for debris. Page 4
• Replace broken or out of shape belt. Page 4
Belt • Replace a worn, cut or out of shape belt. Page 4
Hose • Remove clogs from the hose that restrict the airflow.
Make sure hose end is replaced into opening on vacuum base.
Power switch • Step on power switch to turn vacuum on.
Thermal cut-off • See above.
Make sure vacuum is turned off and power cord is unplugged.
!
PN81157 baggedOG.qxd:81157 English 3/4/09 9:49 AM Page 8
Loading...