Euphonix FT730 Operation Manual

Euphonix FT730

FiberTran Fiberoptic Extender Operation Manual

Document Revision: 1.0

Part Number: 840-08661-01

Release Date: April, 2003

Euphonix, Inc.

220 Portage Ave.
Palo Alto, California 94306
Phone: [phone]
Fax: [phone]
Web:
e-mail: [e-mail]

http://www.euphonix.com

In the interest of continued product development, Euphonix reserves the right to make
improvements to this manual and the product it describes at any time, without notice or
obligation.

System 5, S5, PatchNet, eMix, EuCon, R1, Studio Hub, Audio Deck, Max Air, Reel Feel,
Clear Displays, Track Panner, SnapShot Recall, DSC (Digital Studio Controller), Hyper­Surround, Total Automation and Mix View are trademarks of Euphonix, Inc.

Manual design by Rob Wenig.

Manual written by Tim Driedger, Steve Milne, and Rob Wenig.

©2003 Euphonix, Inc. All rights reserved worldwide. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means without written permission from Euphonix, Inc.

Note: This equipment has been tested and found to comply with the limits for a

Class A digital device pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equip­ment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

Caution: Any changes or modifications made by the user that are not expressly ap-

proved by Euphonix could void the user’s right to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS

The lighting flash with arrowhead symbol within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

The exclamation point within an equilateral triangle, is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi­nation to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

15) WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPARATUS TO RAIN OR MOISTURE.

16) Do not expose this equipment to dripping or splashing and ensure that no objects filled with
liquids, such as vases, are placed on the equipment.

17) To completely disconnect this equipment from the AC Mains, disconnect the power supply
cord plug from the AC receptacle.

18) The mains plug of the power supply cord shall remain readily operable.

19) This unit is provided with a power supply cord set suitable for 120V AC input only (for U.S.A.
and Canada). For other than U.S.A. and Canada, a qualified person must provide for use with
this unit, an appropriate, approved power supply cord set which is in compliance with the end
use country requirements and has a minimum cross-sectional area of 1.0mm2.

20) For units with more than one power cord:

Caution: This unit has more than one power supply cord. Disconnect two power supply

cords before servicing to avoid electrical shock.

Attention: Cet appareil comporte plus d’un cordon d’alimentation. Afin de prévenir les

chocs électriques, débrancher les deux cordons d’alimentation avant de faire le
dépannage.

21) Operator Accessible Fuse:

Caution: For continued protection against risk of fire, replace only with same type and

rating of fuse.

Attention: Pour ne pas compromettre la protection contre les risques d’incendie, remplacer

par un fusible de même type et de même caractéristiques nominales.