eufy Security T8900 Quick Start Manual

Quick Start Guide

Entry Sensor

Anker Innovations Limited. All rights reserved.

eufy and the eufy logo

are
trademarks of Anker Innovations Limited, registered in the United States
and other countries. All other trademarks are the property of their respective
owners.

5100500xxxx V01

Kurzanleitung | Guía de inicio rápido

Guide de démarrage rapide | Guida di avvio rapido

English

01

For Entry Sensor Installation:

Entry Sensor

(T8900)

Sensor Magnet CR123A Battery Mounting Screws

English 01

Deutsch 11

Español 18

Français 25

Italiano 32

02

English English

03

1. Entry Sensor is only compatible with the eufyCam Security System.

2.

Make sure the region printed on your product package (A or B),
matches the region printed on your HomeBase.

Region A or B

Region A or B

Battery Placement

Remove the battery compartment lid on the Entry Sensor and insert the
provided CR123A battery. Replace the lid.

04

English English

05

Adding Entry Sensor to Your System

O

n Eufy Security app follow the onscreen instructions to add your Eufy Security

devices. Choose

Add Device

, then select

Entry Sensor

to add it to your system.

Mounting the Sensor

Place the sensor on the edge of a door
or window. Use the adhesive strips (On
the back of the sensor) or mounting
screws provided to mount the sensor.

• Make sure the gap between Entry
Sensor and the sensor magnet is
less than

1.6 in (4 cm)

when the

door or window is closed.

• The bottom of the sensor magnet
should align with the

bottom

of

Entry Sensor.

06

English

English

07

LED

Sensor LED indicator color Entry Sensor status

Flashing white Adding to HomeBase

Flashing white (

Once)

Sensor detects an open/close activity

Flashing red (Once)

Sensor battery is low or disconnects from
HomeBase

FAQ

1. What battery does the Entry Sensor use?

Entry Sensor uses a CR123A battery with 3V output.

2. How long does the battery last?

One CR123A battery usually lasts up to 2 years, but depends on the usage.

Please visit our official website to download the user manual: www.eufylife.com

Safety

This product complies with the radio interference requirements of the

European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.For
the declaration of conformity, visit the Web site https://www.eufylife.com/.
Do not use the Device in the environment at too high or too low temperature, never
expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0°C - 40°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that maintain a
20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

SUB-1G Frequency range:866~866.8MHz, 868.2~869MHz
Max Output Power: 11.746dBm
The following importer is the responsible party (contact for EU matters only)
Importer:Anker Technology (UK) Ltd
Importer Address:Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham,United Kingdom B11 2AA

This product is designed and manufactured with high quality materials and

components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste,

and should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/TV technician
for help.
FCC Radio Frequency Exposure Statement

English

0908

English

Deutsch

11

10

English

The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation distance
is 20cm.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:[phone]
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement."

Für die Einbruchsensor-Installation:

Einbruchsensor

(T8900)

Sensormagnet CR123A-Batterie Befestigungs-

schrauben