Etung Technology ER 600 User Manual

ER-600 Wireless Router

User Manual

eTung Technology Co. Ltd

2nd Floor Building 3, Beike Industrial Park, No.7 Feng Xian Mid Road,

Haidian Dist. Beijing

TEL:4008-909-611 FAX:010-64857815

Website: www.etungtech.com.cn

ER-600 User Manual

Table of Contents

1. Product Introduction ....................................................................................................... 4

1.1 Brief Introduction ......................................................................................................... 4

1.2 Product Outlook ............................................................................................................ 5

1.3 Standard Accessories .................................................................................................. 7

1.4 Dimension........................................................................................................................ 9

1.5 Working Mechanism .................................................................................................. 10

1.6 Specifications ............................................................................................................... 10

1.6.1 Technical Parameters .................................................................................... 10

1.6.2 Indicator Light Description .......................................................................... 12

1.6.3 Serial Port Definition ..................................................................................... 13

1.6.4 RESET Button ................................................................................................... 13

1.7 Typical Usecases ......................................................................................................... 14

2. Device Configurations ................................................................................................... 17

2.1 Configurations .............................................................................................................. 17

2.1.1 Preparation ........................................................................................................ 17

2.1.2 Configuring ER-600 ........................................................................................ 17

2.2 Configuration Parameters ....................................................................................... 22

2.3 Restore to Default ...................................................................................................... 23

2.4 Firmware Update ........................................................................................................ 24

2.5 Remote Configurations ............................................................................................. 26

Appendix 1: Configure ER-600 to Access Internet via 4G Network ............................ 33

Appendix 2: Configure ER-600 to Access Internet via Cable/WIFI ............................. 34

Appendix 3: eYun Virhub Testing Case .................................................................................. 42

Appendix 4: eYun Vircom Testing Case ................................................................................. 47

Appendix 5: Use ER-600 to Access LAN Remotely via VPN ........................................... 53

Appendix 6: Configure GPS Query Settings and GPS data format ............................. 57

Appendix 7: Send/Receive SMS with ER-600’s Ethernet Interface and SMS Format

.............................................................................................................................................................. 60

Appendix 8: Send/Receive SMS with ER-600’s Serial Port ............................................ 64

ER-600 User Manual

1. Product Introduction

This chapter mainly introduces the outlook, accessories, specifications and mechanism of ER-600.

1. Brief Introduction

2. Product Outlook

3. Accessories

4. Dimension

5. Working Mechanism

6. Specifications

7. Typical Usecases

1.1 Brief Introduction

ER-600 is an industrially designed product that embeds industrial 4G wireless communication module. It has capability of high-speed Internet access, high-speed video and data transmission. Compared with ER-800 and MR-900 industrial routers, ER-600 has more data interfaces and more flexible network access modes. It is a high cost-effective and industrial wireless router.

ER-600 not only supports all network modes from China’s three mobile operators, but also has two RJ-45 Ethernet interfaces, one of which (LAN1) can be used as WAN as well, one RS232 and one RS485 serial interfaces. Ethernet interfaces and serial interfaces can be used

at the same time. It breaks through network limits.

ER-600 has WIFI functionality as well, and supports 802.11b/g/n protocol. In theory the highest speed can be 150Mbps. Either mobile phones, PCs or other devices that have WIFI functionality, can bind ER-600’s WIFI access point and share Internet access via ER-600. This greatly extends the number of devices that can connect with ER-600

ER-600 User Manual

at the same time.

ER-600 can use WAN or WIFI network: in case cable network is available, WAN (LAN1) port can be used to access cable network; and in case WIFI is available, ER-600 can be configured to access internet via WIFI. 4G, WAN and WIFI are all supported by ER-600, this greatly facilitates customer’s project deployment that customers do not have to choose different devices from different suppliers because of different network access at the spot. This can not only save procurement cost, but also reduce maintenance effort for the projects.

GPS model can be embedded into ER-600, to implement device location. Set time interval of transmitting GPS location data, then after ER-600 connects to data center, it will transmit location data to data center with the predefined time interval. Data center can also ask for GPS location data at any time by sending commands. Besides, the device connecting ER-600 can also send AT command via RS232/RS485 serial port to ask for location information.

ER-600 is easy to use, and is plug-n-play without any configuration.

Together with eTung’s eYun platform and Virhub/Vircom software, it

can be easy to integrate with PLC programming software, and there is no extra integration effort. ER-600 is stable and easy-to-use, thus greatly facilitates project deployment.

1.2 Product Outlook

ER-600 User Manual

Figure 1-1: ER-600 side view 1

Figure 1-2: ER-600 side view 2

ER-600 User Manual

1.3 Standard Accessories

Figure 1-3: 4G all frequency sucking antenna

Figure 1-4: WIFI antenna

ER-600 User Manual

Figure 1-5: GPS antenna

Figure 1-6: Cross cable

NOTE: The accessories may be different because of different models and customer requirements, the figures above are just for reference.

ER-600 User Manual

1.4 Dimension

Figure 1-7: ER-600 dimension

Figure 1-8: Installation effect

1.5 Working Mechanism

Figure 1-9: ER-600 working mechanism

ER-600 User Manual

ER-600 connects with PC via Ethernet cross cable, and set PC’s IP address as automatically obtained IP. After power on, it dials up into 4G network (or, via cable/WIFI network) and access Internet, then PC can access Internet via ER-600, and then access the application server. At the same time, ER-600 can be a WIFI AP, and PC (or other devices that support WIFI) can connect to ER-600’s AP with its own WIFI network adapter, instead of using network cable, and then access Internet via ER-600. Meanwhile, ER-600 can be used to build remote virtual LAN with Virhub or VPN, to monitor video remotely, and publish programs remotely on LED color screens, acquire data and control PLC remotely, etc.

1.6 Specifications

1.6.1 Technical Parameters

 Basic Parameters

 Power Supply: +12 ~ +48V wide range of voltage input  Power Connector: inner(+) outer(-)  Max Current: 350mA@+12V DC  Standby Current: 250mA@+12V DC  Network:

ER-600 User Manual

ER-600-N4:

FDD-LTE

WAN

ER-600-W0：WIFI/WAN

ER-600-W4: FDD-LTE WIFI/WAN

ER-600-N4G： FDD-LTE

WAN

GPS

 Frequency:

Band FDD-LTE B7

WIFI IEEE 802.11n/g/b: 2.4GHz GPS L1, 1575.42MHz

 Data Interface: RS232/RS485, two RJ45 Ethernet interfaces  Temperature: -30ºC ~ +80ºC  Humidity: 95%@+40ºC  Dimension: 88x118x34mm (excluding antenna and handle)

 Basic Functions

 Support NAT  Support DHCP server  Support DNS Proxy  Support port forwarding  Support DMZ host(IP address mapping)  Support VPN  Support dynamic domain auto-registration  Support configuring static route table  Support real-time speed display of wireless network  Support configuring with serial port, telnet and web

interface

 Support serial port DTU function, Ethernet and serial

interfaces can be used at the same time

ER-600 User Manual

LED Indicato r Light

Color

Status

Description

Signal

lights

Orange

Always light

There are three signal lights. All lights one means the signal is strongest.

PWR

Red

Always light

Device is working

Extinguished

Device is not working

NET

Green

Always light

Connected to Internet

Extinguished

No connection to Internet

ERR

Red

Always light

SIM card error

SVR1

Green

Always light

DTU has connected to data center

Extinguished

DTU does not connect to data center

SVR2

Green

Always light

Virhub is working

Extinguished

Virhub is not working

WIFI

Green

Always light

WIFI is enabled

Extinguished

WIFI is not enabled

LAN1

(WAN)

Green

Always light

Ethernet connection OK

Extinguished

Ethernet connection not OK

LAN2

Green

Always light

Ethernet connection OK

Extinguished

Ethernet connection not OK

GPS

Green

Always light

Has latitude and longitude data

Flashing quickly

Found satellite signal, but has no latitude and longitude data

Flashing slowly

No satellite signal

 Support flow control per month, and hours per month for

internet access

 Support flow wakeup, phone wakeup and SMS wakeup

1.6.2 Indicator Light Description

4G model is not working or

Extinguished 4G model is working

Table 1-1 ER-600 indicator light description

ER-600 User Manual

Type

RS-232

Pin 2 3

Definition

RXD

TXD

GND

Type

RS-485

485A

485B

Definition

1.6.3 Serial Port Definition

Table 1-2: ER-600 RS232 serial port

(Standard RS-232 DB9 male port) pin definition

Table 1-3: ER-600 RS485 serial port pin definition

1.6.4 RESET Button

To reset ER-600 to default, login its configuration web page, and choose “System tools” -> “Restore set”; Or: press the RESET button continuously, the signal lights will flash one by one, until all lights are on, that means the reset is finished.

ER-600 User Manual

1.7 Typical Usecases

Figure 1-10: Access Internet via 4G network

Figure 1-11: Access Internet via cable/WIFI network

ER-600 User Manual

Figure 1-12: Implement virtual LAN via ER-600’s Virhub functionality

Figure 1-13: Implement device remote control via ER-600 and Vircom

functionality

ER-600 User Manual

Figure 1-14: Use ER-600 to access LAN remotely via VPN

ER-600 User Manual

2. Device Configurations

This chapter introduces how to use ER-600 and related parameters.

1. Configurations

2. Parameters

3. Restore to default

4. Firmware Update

5. Remote Configurations

2.1 Configurations

2.1.1 Preparation

 One cross Ethernet cable used to connect ER-600 with PC or

customer device;

 One 4G all frequency sucking antenna;  One power supply;  One USIM card that can access internet.

2.1.2 Configuring ER-600

 Connect ER-600 with PC via a cross Ethernet cable;  Boot PC, and set IP address as "Automatically obtain IP

address";

ER-600 User Manual

Figure 2-1: Set IP address as "Automatically obtain IP address"

 Open IE browser, input address "http://192.168.1.1" and press

Enter;

 Input "root" as username and "1234" as password, then press

Enter to login web configuration interface and configure the device.

Figure 2-2: Login router configuration interface

ER-600 User Manual

 It is clear to see each configuration item in the router

configuration interface. To change some parameter, click it, modify and then save it, then reboot the router. Configure DTU functionality if serial port is used, with data center IP:Port as eyun.etungtech.com:8080

Figure 2-3: Configure DTU functionality

 Enable Virhub functionality to use this function, the

configuration interface is shown as below:

ER-600 User Manual

Figure 2-4: Configure Virhub functionality

+ 46 hidden pages

Etung Technology ER 600 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual