Backsplash
SUPPLIES NEEDED TO INSTALL A BACKSPLASH
Caulk Gun
Construction Adhesive
Waterproof Clear Silicone Caulk
Caulk Toolî˘(optional)
Pre-Cut Backsplash and/or Sidesplash
1) Make sure to clean the surface of the vanity, backsplash, and sidesplash.
2) Apply construction adhesive to the backside of the backsplash with a caulk gun.
3) Apply a thin line of silicone along the edge of the vanity top, where the backsplash
will sit.
4) Set the backsplash in place.Press the front and top to ensure good adhesion.
5) If applicable, apply a thine of silicone along the front edge of the backsplash, where
the sidesplash will touch the front side of the backsplash.
6) If applicable, set each sidesplash in place and press for good adhesion.
7) Once set, apply silicone where the backsplash (or sidesplash) and countertop meet.
8) Smooth the caulk line with a caulk tool.
STEPS TO INSTALL:
Loading...