PIECE QUANTITY
A 1X
B 4X
C 1X
D 4X
Step 1 Step 2
STRETCHER
BUNFOOT
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Insert Bolted end of Post (B) into hole on bottom of Table Top
(A). Twist 4 Posts clockwise until tight.
Position Stretcher (C) on Posts (B) so that holes on
Stretcher align with holes on Posts. Insert Bolted end of
Foot (D) into hole on Stretcher and Post. Twist 4 Foot
clockwise until tight.
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Product Dimensions : 19.4"W x 19.4" D x 21.9" H
Part List and Hardware List
POST
DESCRIPTION
PICTURE
TABLE TOP
Loading...