Page 1
SMA1-HPC5
Speaker Driver
Sound Surveillance tm
Description
The SMA1-HPC5 is a line level, 30
Watt, 70V speaker driver (power
amplifier) and SM series microphone interface typically for use in
2 way audio surveillance systems.
A single CAT5 cable connects the
SMA1-HPC5 to any ETS speaker/
microphone ordered with a C5
option. Directly connects to DVRs
and remote monitoring equipment.
Use one of our Sound Surveillance
speakers with a built in 70V
transformer & SM1 microphone
(CAT5 option) for cable runs up to
350 feet.
Includes
• SMA1-HPC5 Speaker driver /
microphone interface.
• 24 VAC 50VA AC adapter.
• 2 each 6’ RCA or 3.5mm patch
cable.
• Installation instructions.
Options
• SPECIFY: RCA or 3.5mm input
connectors.
Wiring Requirements
• 1 CAT5 8 conductor cable and 2 each
RJ45 connectors. 350’ max.
Microphone Interface
SMA1-HPC5 Speaker/Mic. interface
• Single CAT5 cable run up to 350'
between SMA1-HPC5 and
speaker/microphone. Line level (0db)
audio input and outputs.
• Standard RCA or 3.5mm jacks for
connection to DVRs etc.
• Adjustable independent volume controls
for speaker and microphone.
• 30 Watts RMS power output (70v balanced
line).
• Balanced 600 Ohm microphone signal
transmission. Audio is transformer
converted to unbalanced.
• Frequency response 200-10Khz.
• Short circuit protected.
• Built in 70V 30w audio power transformer.
• Euro-style connectors makes speaker and
microphone cable terminations fast and
clean.
• LED power indicator and Auto reset fused.
• Call sw: unreferenced, 2 free terminals.
• Power:24 VAC @ 2000mA
• Grey plastic ABS housing.
• Dimensions: L 5.3 x W 3.3 x H 1.6
Loading...