ETS SA1-MP Specsheet

Sound Surveillance tm

Description

The SA1-MP is a line level in to 10
Watt, selectable 70V or 8 Ohm speaker
driver (power amplifier) typically for
use in 2 way audio surveillance
systems. Directly connects to DVRs
and remote monitoring equipment.
The SA1-MP. can also be used in any
single zone public address
application. Use one of our Sound
Surveillance speakers with a built in
70V transformer to permit speaker
cable runs up to 1000 feet

SA1-MP

70V / 8 Ohm 10 Watt

Speaker Driver

Includes

• SA1-MP Speaker driver.

• 16 VAC AC adapter.

• 1 each 3’ RCA or 3.5mm patch

cable.

• Installation instructions.

Options

• SPECIFY: RCA OR 3.5mm input

connector.

Wiring Requirements

• Speaker cable run: stranded 22-

gauge, 2-conductor:

• 70V mode: cable: 1000 feet max

• 8 Ohm mode: 100 feet max.

SA1-MP Speaker Driver Specifications

• RCA or 3.5mm input connector (specify upon
ordering).

• Input: 70v line or 0dB (line level), switch
selectable.

• Output: 8 Ohm direct or 70V, switch selectable.

• 10 Watts RMS output power.

• Output short circuit protected.

• Adjustable Volume level.

• Frequency response: 200-15Khz

• Fused, 16.5VAC power input.

• Compatible with all ETS STWx base stations

• Built in 70V 10w audio power transformer.

• Euro-style connectors makes speaker and

microphone cable terminations fast and clean.

• Dimensions: L 5.3 x W 3.3 x H 1.6