ETI SC-20-840-SV-OS-BZ, 51402241, SC-20-840-SV-OS-W, 51402242 Use And Care Manual
Part # SC-20-840-SV-OS-BZ
SC-20-840-SV-OS-W
Model # 51402241
51402242
USE AND CARE GUIDE
LED SECURITY LIGHT
DUSK TO DAWN
Questions, problems, missing parts?
Call ETiSSL Customer Service
8 a.m. - 5 p.m., CST, Monday - Friday
1-855-ETi-SSLI (1-855-384-7754)
www.ETiSSL.com
THANK YOU
We appreciate the trust and condence you have placed in ETi through the purchase of this LED light.
Visit us online to see our full line of products. Thank you for choosing ETi!
3 ETiSSL.com
Please contact 1-855-384-7754 for further assistance.
Safety Information
WARNING: Carefully read and understand the information
given in this manual before beginning the assembly and
installation. Failure to do so could lead to electric shock, re,
or other injuries which could be hazardous or even fatal.
WARNING: Ensure the electricity to the wires you are
working on is shut off. Either remove the fuse or turn off the
circuit breaker.
WARNING: Changes or modications not expressly
approved by the party responsible for compliance could void
the use authority to operate the equipment.
NOTICE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
□ Reorient or relocate the receiving antenna.
□ Increase the separation between the equipment and the receiver.
□ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.
Warranty
WHAT IS COVERED
The manufacturer warrants this lighting xture to be free from defects in materials and workmanship for a period
of ve (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation,
and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided
that the product has not been damaged through misuse, abuse, accident, modications, alterations, neglect, or
mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any
way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of
the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure
not relating to faulty material or workmanship. This warranty shall not apply to the nish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specically disclaims any warranty, whether express or implied, of tness
for a particular purpose, other than the warranty contained herein. The manufacturer specically disclaims any
liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any
labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-384-7754 or visit www.ETiSSL.com.
Table of Contents
Table of Contents ......................................3
Safety Information ....................................3
Warranty ...................................................3
Pre-Installation .........................................4
Planning Installation ..............................4
Tools Required .......................................4
Package Contents ..................................4
Hardware Included .................................4
Installation ................................................5
Maintenance .............................................7
Light Distribution ......................................7
PIR Sensor Testing ....................................8
Care & Cleaning ......................................11
Troubleshooting ......................................11
4
Pre-Installation
PLANNING INSTALLATION
Before beginning assembly, installation, or operation of the product, make sure all parts are present. Compare parts
with package contents list and hardware contents list above. If any part is missing or damaged, do not attempt to
assemble, install, or operate the product. Contact Customer Service for replacement parts.
This light xture is suitable for wall mounting or eave mounting only. It is not suitable for ground mounting
installation. The light xture should be mounted a minimum of 6.5 ft. (2.0 m) above the ground. If two walls
intersect, the distance between the intersecting line and the light xture should be more than 2 ft. (0.6 m).
NOTE: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualied electrician to do the
installation.
TOOLS REqUIRED
Part Description quantity
AA Mounting Screw (long) 1
BB Mounting Screw (short) 2
CC Grounding Screw (green) 1
DD Rubber Plug 1
EE Wire Connector 3
FF Mounting Bracket 1
GG Foam Gasket 1
Part Description quantity
A Light Head 2
B Light Fixture Base 1
C PIR Sensor 1
PACKAGE CONTENTS
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
A
B
C
AA
BB
DD
EE
FF
GG
CC
Wire
Strippers
Philips
Screwdriver
Electrical
Tape
Wire
Cutters
Gloves
Safety
Goggles
Ladder
Silicone
Sealant
Loading...