ETI FoodSafe 803-900 Operating Instructions Manual

FOODSAFE FRIDGE

THERMOMETER

Operating Instructions

Product code:

803-900

The FoodSafe food simulant thermometer
is an encased thermometer that ensures
it indicates temperature similar to food
stored in the fridge or chill cabinet.
Therefore it is not subject to the changes in
air temperature that normally occur when
the door is opened. It is the temperature
of the food that is important in preventing
the growth of food poisoning bacteria.

INSTRUMENT OPERATION - Hang or
place the thermometer on the middle
shelf, towards the back of the fridge. Like
food, the thermometer will take a while to
reach the appliance temperature. Check
the fridge is at the correct temperature
(between 0 and 5 °C), if it is above this
range, turn the fridge thermostat down,
until the optimum temperature is obtained.

GUARANTEE - This instrument carries a
one-year guarantee against defects in either
components or workmanship. During this
period, products that prove to be defective
will, at the discretion of ETI, be either
repaired or replaced without charge. The
product guarantee does not cover damage
caused by fair wear and tear, abnormal
storage conditions, incorrect use, accidental
misuse, abuse, neglect, misapplication

or modication. Full details of liability are

available within ETI’s Terms & Conditions
of Sale at etiltd.com/terms. In line with our
policy of continuous development, we
reserve the right to amend our product

specication without prior notice.

Electronic Temperature Instruments Ltd

Worthing · West Sussex · BN14 8HQ

01903 202151 · [e-mail] · etiltd.com

Supplied by

803-900/30.10.18