Page 1
8-Port 10/100Base Fast Ethernet
PoE Ethernet Switch
Quick Start Guide
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 8 10/100M ports. It was
designed for easy installation and high
performance in an environment where traffic
is on the network and the number of users
increases continuously.
It consists of 8 PSE/PoE ports. That can solve
the limitation of the power outlet location and
offer the system designer a flexible solution to
locate the network device everywhere.
The compact rigid desktop size was
specifically designed for small to medium
workgroups. It can be installed where space
is limited; moreover, it provides smooth
network migration and easy upgrade to
network capacity.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
z One PoE Fast Ethernet Switch
z One Power Cord
z One User’s Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
z 8 Port 10/100M Nway (Auto-negotiation)
Switch
z 8 PSE/PoE function ports
z Supporting the power Max. 15.4 W for each
PSE/PoE port
z 11” Desktop size with metal case
z Can be installed in
a 19” cabinet by
rack-mount kits
z Auto-learn of networking configurations
z Auto-detect full/half-duplex modes for any
port
z Dedicated full-duplex 200Mbps bandwidth
z Store-and-Forward switching methods
z IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
z Non-blocking & Non-head-of-line blocking
full wire speed forwarding
z Auto-MDI/MDI-X function for any port
z Smart plug & play
Front Panel (LEDs)
LED Indicators of 8 Port PoE 10/100M
Switch
LED Status Description
On Power is on. Power
Off Power is off.
On Port is for connection.
Off No connection.
LINK/ACT
Flashing Data is transmitting or
receiving
On Port is linked to Power
Device
PoE
Off No Power Device is
connected
Connections
Switch/Hub to this 8 Port PoE Fast
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another switch
without crossover cable.
Page 2
PC/Other devices to this 8 Port PoE
Fast Ethernet Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.
Power Device to this 8 Port PoE Fast
Ethernet Switch and getting 48V power
source through Cat. 5 cables
Using Cat. 5 twisted-pair cable to connect
Power Device to the port 1~8 of this switch,
and then this switch will supply 48V power to
Power Device over Cat. 5 twisted-pair cable.
Please be noted Power Device should also
comply with IEEE 802.3af.
Rear Panel (Power
)
AC input
AC input (100~240V/AC, 50~60Hz) UL
Safety
Technical Specifications
Standards
IEEE 802.3af
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow control
Features
Number of Ports: 8 PSE/PoE
Ports
MAC Address: 1K
Buffer Memory: 512K bits
Method: Store and
Forward
Filtering/
Forwarding
Rates
100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission
Media
10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5 UTP/STP
LED
Indicators
Per Port: LINK/ACT, PoE
ACT/Status
Per Unit: Power
Power Input 100~240V/AC, 50~60Hz
Power
Output
48V/DC Per Port Output –
15.4 W Max Per Port
8 Ports at Full 15.4 W
Output Supported
Power
Consumption
130 Watts (Max)
Dimensions
266 × 160 × 44 mm
(L x W x H)
Weight 1.6 kg
Operating
Temperature
0 to 45℃
Storage
Temperature
-10 to 70℃
Humidity
5 to 95% RH
(non-condensing)
Certifications FCC Class A, CE
Loading...