Etherma CP Series, CL Series, CP-600, CP-1000, CP-1500 Installation And Usage Instructions
...
DIRECT HEATING DEVICES
CP/CL Convector
Rapid and straightforward heating
Installation and usage instructions
› Read these instructions before commencing installation and initial start-up.
› Contains important warning notices.
www.etherma.com
InstallatIon and usage InstructIons | cp/cl convector
INTRODUCTION
By choosing ETHERMA, you have opted for a superb heating
solution. Thank you for your condence in us. You have opted
for a competent partner with over 35 years of experience. You
will benet from our continuous innovation, high-quality prod-
important information on safety, installation, use and maintenance of the device. Therefore, please read the information
provided in these instructions carefully and keep for reference
in the event of questions on a later occasion.
ucts and modern design.
The manufacturer shall not be held liable if these instructions
We offer an extensive range of services to support you and can
nd a product solution suitable for your individual require-
are not complied with. Products may not be used improperly
i.e. for purposes other than the intended use.
ments.
The packaging of your high-quality ETHERMA product is made
These instructions are intended to help you to use your ETHER-
from recyclable materials.
MA quality product as effectively as possible. They provide
IMPORTANT SAFETY AND INSTALLATION INFORMATION
These instructions must
› be given to the operator following installation. The operator
Attention: Properly dispose of packaging material, parts replaced in future and old devices or parts for scrappage.
must also be instructed on the electrical convector's functionality.
› kept safe and transferred to the new owner in the event of a
change in ownership.
General
ETHERMA electrical convectors are versatile direct heating
devices. They are characterised, in particular, by their elegant
form, ease of operation, high-performance heating and reliability. The convectors are tted with operating switches and
temperature controllers and are therefore also suitable for use
as frost-protection devices. Please read the information pro-
vided in these instructions carefully. The manufacturer shall
not be held liable if these instructions are not complied with.
Devices may not be used improperly i.e. for purposes other
than the intended use.
Your high-quality ETHERMA device contains no more packaging than is absolutely essential, and packaging is made entirely
from recyclable materials. Packaging and device components
are labelled appropriately within the context of present regulations/options, so that they can be recycled separately or dis-
Important notes
› ETHERMA electrical convectors comply with relevant safety
requirements.
› Repair and service works may be performed by qualied
personnel only.
› Comply with country-specic safety regulations.
› Comply with local safety precautions.
› When installing in a bathroom, install the device so that
switches or other operating elements cannot be touched by
persons in a bathtub or shower.
› Do not cover the device (re hazard).
› The device cannot be disconnected from the mains with the
temperature controller.
› Comply with the minimum distances specied.
› If children or persons with limited physical, sensory or men-
tal capacity operate the device, ensure that they do so under
supervision or following appropriate instruction by a person
charged with ensuring their safety.
› Children should be supervised in order to ensure that they
do not play with the device.
posed of properly at a later date.
404 mm
270 mm
28 mm
33 50
83 mm
10
9
8
7
6
5
B1
C
A
10
9
8
7
6
5
B2
Fig. 1: CP Fig. 2: CL
Type Output (W)
CP-600 600 552 172 210
CP-1000 1000 803 246 310
CP-1500 1500 1175 282 610
CP-2000 2000 1423 406 610
CL-500 500 803 246 310
CL-1000 1000 1299 344 610
2
204 mm
28 mm
90 mm
7
6
5
B1 C
A
7
6
5
Dimensions (mm)
A B1/B2 C
B2
InstallatIon and usage InstructIons | cp/cl convector
10
9
8
7
6
5
10
9
8
7
6
5
10
9
8
7
6
5
= 100 mm
0
+23OC
+20
O
C
+23OC
INSTALLATION
1
2
2
3
1
1
3
50 mm
0 mm
0 mm
0 mm
2
2 3
0
2
3
1 2
1
2 3
3
InstallatIon and usage InstructIons | cp/cl convector
L
N
10
9
8
7
6
5
10
9
8
7
6
5
AB C
A
B
INSTALLATION - PROFESSIONAL
1 2 3
3
230 V
400 V
The device may be connected to electrical systems only by a specialist, observing the installation instructions as well as the
relevant VDE regulations and those of the regional electricity company.
GENERAL WARRANTY CONDITIONS
Dear customer,
please observe our general terms and conditions. Country-specic legal entitlements apply to warranty claims; please assert
such rights directly through your distributor.
ReseRvation: We reserve the right to make technical changes. Modications, errors and misprints shall not constitute grounds for damages.
WaRning: Electrical and electronic appliances often contain precious materials. But they can also contain harmful substances that were
necessary for their function and safety. They can harm the environment if disposed or mishandled. Please help to protect our environment!
Therefore do not dispose of this device in the residual waste. Dispose of this unit in accordance with local regulations. Dispose of the packaging
materials, replacement parts or equipment parts properly.
ETHERMA
Elektrowärme GmbH
Landesstraße 16
A-5302 Henndorf
T +43 (0) 6214/76 77
T +43 (0) 6214/76 66
ofce@etherma.com
www.etherma.com
ETHERMA
Deutschland GmbH
Bahnhofstraße 40
D-48599 Gronau
T +49 (0) 25 62/81 97 00
F +49 (0) 25 62/81 97 029
ofce.de@etherma.com
www.etherma.com
as at: 11/2016
Loading...