Ethereal HDM-DAD User Manual

HDM-DAD

HOME THEAT E R

SET UP GUIDE INFORMATION

Thank you for purchasing the HDM-DAD. The first of its kind, the HDM-DAD HDCP/EDID line driver with built in

iagnostics corrects for corrupt data from inferior loading on the HDCP and EDID communication channel.

d

▲

Designed for easy set-up and operation; wall mount or table mount

▲

Direct Coupled from input to output offering maximum video bandwidth

▲

Full Balanced Line Transition-Minimized Differential Signaling (TMDS®)

▲

Designed for HDTV 480I, 480p, 720p, 1080I, and 1080p

▲

Compatible with Computer Resolutions VGA, SVGA, XGA, SXGA and UXGA

▲

Four LED-HDMI®Stat us Ind icat ors: Verif ies +5Volts, Hot Plug, Monitors HDCP EDID

▲

Automatically Corrects HDCP and EDID data integrity

Set-Up Guide

Simply Connect your HDM-DAD

Install the HDM-DAD between the input and output of HDMI®devices

Top of the unit

1. Red LED glows when Hot Plug is detected.

2. Green LED glows when the 5 volts are detected.

3. Yellow and Blue Data LED’s verifty EDID and HDCP and will flash every 2 seconds after initial
start-up has completed confirming the operation.

Troubleshooting

LED ON OFF FLASHING

Red – Hot Plug XX Sink Problem

Green – 5 Volt XX Source Problem

Yellow – EDID XX(NG) X(GOOD)

Blue – HDCP XX(NG) X(GOOD)

460 Walker Street
Holly Hill, FL 32117-2653

866.839.9187
www.etherealhometheater.com

For the most reliable and highest quality

performance cables, look for the

For more information on the Ethereal DPL

approved cable products, please visit

www.dpllabs.com/page/dpl-member-ethereal.

One Year Manufacturer’s Warranty

DPL Seal of Approval.

Proudly Made in the U.S.A. 7-11