Eternal Lighting ElitePar QUAD User Manual

ElitePar™ QUAD

Eternal
Lighting

ElitePar™ QUAD

USER MANUAL

Professional Entertainment Equipment

Introduction:

You will be so thrilled to know a thinking green LED lighting manufacture has brought to
light the missing link in lighting design for room wall wash lighting to an all new level. That
missing link is in the details throughout our Research and Development phase and road
testing in real world applications. Eternal Lighting made this par fixture unlike any other
fixture on the market today. The impossible before is now a reality. The proprietary

EliteProgramming™ & DMX control on board the ElitePar™ Quad and ElitePar™ Series in part

or in its entirety is the intellectual property (IP) of Eternal Lighting LLC. Licensing for

EliteProgramming™ and more information can be found by contacting Eternal Lighting with
the contact form on our site. The ElitePar™ RGBA and the EliteProgramming™ Series are

trademarks or Eternal Lighting LLC. EliteProgramming™ refers to the identification of the
trademark itself and the functionality.

ElitePar™ QUAD

Features & Technical Specifications:

 (10) Matched 10 Watt QUAD RGBW LEDs
 3CH, 4CH, 6CH, 7CH, 8CH, 11CH & 12CH DMX Modes
 Sound Active - (3 Different Sound Active Modes)
 Sound Active is accessible by DMX or Manual
 Auto Mode with Speed Control
 Fade mode with Speed Control
 Manual Color Mix Mode by Master Slave all other Fixtures change color on

demand

 LCD Push Button Display
 Power In & Power Out
 Master Reset Function
 Total Run Hour View
 Lux 15,400 at 1 Meter
 Eternal Lighting 2.4Ghz Wireless DMX XT Stick™ Ready
 Packing Size: 26x16x26 cm
 Weight: 7.9 lbs
 Power: 100W
 Voltage: AC110-240V 50/60Hz

ElitePar™ QUAD

Menu:

Addr: DMX Address (A000-A512)

ChNd: Channel Mode 3CH, 4CH, 8CH

SLNd: Slave/Master Mode (Note: Put in Mast mode when using standalone and

Slav when using DMX)

ShNd:

 SOUN: (3 different Sound active modes)

o S-1 ON (16-100) Color change Color Change, Fade & Strobe

o S-2 ON (101-175) Color change when hear sound through 15

preset colors and no sound or low sound it will stop on the last
color it was on until it hears sound

o S-3 ON (176-255) Color change when hear sound & Fade when

no sound or low sound

 COLO: AUTO Color change – Press Enter Sp 1 (very slow cycle all 31 pre-

set colors) Sp 8 (very fast cycle all 31 pre-set colors)

 Fade: Press enter Sp1=Very Slow – Sp8=fast

 Nanu: Color Mixer – Red 0-255, Green 0-255, Blue 0-255, White 0-255

When you mix your desired color, press Enter to save the command.

(Note: When using DMX, put all colors back to 255)

NAdL: Master Dimmer for Nanu (color mixer) 0-255 brightness

Test: Press Enter to color change through Red, Green, Blue, White

VE 2.0: This feature displays lifetime run hours

Please visit our website at www.EternalLighting.com to veiw our

warranty statement. Thank you for your purchase!

LUX Meter: