Installation Instructions and Care
86m
m
86m
m
Eventually, you may want to replace this light fitting
When your light fitting comes to the end of its life or you choose to update or upgrade it by
replacing it, please do not dispose of it with your normal household waste, please recycle where
facilities exist. When you need to dispose of this fitting, check with your retailer or local authority
for suitable options. New regulations require the recycling of Waste from Electrical and Electronic
Equipment (European “WEEE Directive” effective August 2005—UK WEEE Regulations effective 2nd
January 2007). Environment Agency Registered Producer: WEE/GA0248QZ
If you experience problems...
If your light is defective or develops a fault, please return it to the place where you
bought it. You can call our Helpline for advice. The Helpline will gladly give advice on any
aspect of any Eterna Lighting product but may not be able to give specific instructions
regarding individual installations.
If in doubt, consult a qualified electrician.
Help Line
Tel: 01933 673 144
Fax: 01933 678 083
Email: sales@eterna-lighting.co.uk
For all other information visit our website www.eterna-lighting.co.uk
SAFETY AND INSTALLATION
INSTRUCTIONS
Models: TWSRCDMC, TWSRCDWH
SSRCDMC, SSRCDWH
Single Metal Clad Fused RCD Spur,
Twin Unswitched Metal Clad RCD Socket
IMPORTANT! Please read these instructions before installing your new fitting.
Please retain for future reference.
Issue 090730-2PA
Pack Contents
Spur/Socket x 1
M3 Screws x 2
General Information and Safety Instructions
LOAD LINE
N
L
N
L
E
LOAD LINE
N
E
NL
L
N
L
E
Installation Instructions and Care
Read this first
Check the pack and make sure you have
all of the parts listed on the front of this
booklet. If not, contact the outlet where
you bought this product.
This product contains glass, care must be
taken when assembling, fitting or handling
to prevent personal injury or damage to
the product.
This light fitting must be installed by
a competent person in accordance
with the Building Regulations making
reference to the current edition of the IEE
Wiring Regulations (BS7671). The Building
Regulations may be obtained from OPSI
or viewed and downloaded from www.
communities.gov.uk following the link for
Building Regulations.
As the buyer, installer and/or user of this
product it is your own responsibility to
ensure that this spur or socket is fit for the
purpose for which you have intended it.
Eterna Lighting cannot accept any liability
for loss, damage or premature failure
resulting from inappropriate use.
If in any doubt, consult a qualified
electrician.
Suitable for indoor use only.
Do not attach to surfaces which are damp,
freshly painted or otherwise electrically
conductive (e.g. metallic surfaces).
Make connections to the electrical supply
in accordance with the following code:
Live - Brown or Red
Neutral - Blue or Black
Earth - Green and Yellow
When making connections, ensure that the
terminals are tightened securely and that
no strands of wire protrude. Check that
the terminals are tightened onto the bared
conductors and not onto any insulation.
This product must be connected to Earth.
You are advised at every stage of your
installation to double-check all electrical
connections you have made. After you
have completed your installation there
are electrical tests that should be carried
out: these tests are specified in the Wiring
Regulations (BS7671) referred to in the
Building Regulations. If in doubt, consult a
qualified electrician.
This product must be connected to Earth.
You are advised at every stage of your
installation to double-check any electrical
connections you have made. After you
have completed your installation there
are electrical tests that should be carried
out: these tests are specified in the Wiring
Regulations (BS7671) referred to in the
Building Regulations. If in doubt, consult a
qualified electrician.
Installation
Fused Spur
• Connect the wiring from the
supply to the terminals marked “LINE”.
• Connect the wiring to your
the terminals marked “LOAD”.
Twin Socket
Connect your mains supply wiring to the
terminals according to the colour code
above. Note that earth connections may
be made to either or both terminal(s)
marked “E”.
LOAD
Yellow/Green (E)
Brown (L)
mains
appliance to
LINE
Blue (N)
Safety Markings
240
13A(3A)
Cleaning
• Clean this socket/spur only with a soft
dry cloth
• Do not use any chemical or abrasive
cleaners.
Operation
1. Restore the mains power (after
installation).
2. Press the green reset button and check
that the indicator window has turned
red.
3. (For every use) Press the Test button.
4. Check that the indicator window has
turned white.
5. Press the reset button and use as a
normal socket.
Specification
• Maximum operating load: 13A resistive,
3A inductive
• Mechanically latched (no need to reset
after power loss)
• Responsive to both positive and
negative cycles
• Trip speed less than 40ms.
• 30mA trip current
• RCD contact break: double pole
Note: unit will trip if the live and neutral
input is reversed and if neutral and/or earth
connections are lost. The unit will also react to
pulsating earth fault currents.
Loading...