Eterna PERLED20 Installation Instructions Manual

Model:

PERLED20

20W LED Perimeter Light

These instructions are provided as a guideline to assist you.

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION

AND RETAIN FOR FUTURE REFERENCE

INSTALLATION INSTRUCTIONS

A guide for qualied electricians

874/2012

MODELNO.

PERLED20

EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:

Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Direc tive” eective August 20 05—UK
WEEE Regulation s eective 2nd January 20 07).
Environment Agenc y Registered Producer : WEE/
GA0248Q Z.

WHEN YOUR PR ODUCT COMES TO TH E END OF
ITS LIFE OR YO U CHOOSE TO REPLACE I T, PLEA SE
RECYCLE IT W HERE FACILITIES E XIST  DO NOT
DISPOSE WITH HOUSEHOLD WASTE.

CLEANING:

Disconnect t he power and clean the exte rior only of
this tting wit h a moist (not wet) cloth.

Do not use any chemic al or abrasive cleaners.

IF YOU EXPERIENCE PROBLEMS:

If you believe your p roduct is defective, p lease return
it to the place where yo u bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, bu t may not be able to give specic
instructions regarding individual installations.

Pack contents:

20W perimeter LED li ght with
IP rated wiring con nection box
and wall mounting b racket

LAMP SPECIFICATIONS:

Lumens total ux

1800 lm

Rated Wattage 20W

Rated luminous ux 1800 lm

Nominal life time of the lamp 25,000 hrs

Colour temperature 3000K

Number of switching cycles
before premature lamp
failure

20,000

Warm-up time up to 60 % of
the full light output

Instant full light

Dimmable No

LED strip dimensions (L/W) 270 x 60mm

Nominal beam angle 160°

Rated power 20W

Rated lamp lifetime 25,000 hrs

Lamp power factor 0.85

Lumen maintenance factor at
end of nominal life

70%

Starting time <0.5s

Colour rendering >80

Colour consistency

Within 6 step

Macadam ellipse

Rated peak intensity 540cd

Rated beam angle 160°

Voltage 240V

Email: [e-mail] / [e-mail]

Visit our website: www.eterna-lighting.co.uk

Made in ChinaIssue 1016

READ THIS FIRST:

Check the pack and m ake sure you have all of the
parts liste d on the front of this bookle t. If not,
contact the outlet where you bought this product.

This produc t must be installed by a compet ent
person in accord ance with the current building a nd
IEE wiring regulations.

As the buyer, install er and/or user of this product it
is your own responsi bility to ensure that this tt ing
is t for the purpo se for which you have intended
it. Eterna Lightin g cannot accept any liability fo r
loss, damage or premature failure resulting from
inappropriate use.

This product is designed and constructed according
to the principles o f the appropriate British Stan dard
and is intended fo r normal service. Using this  tting
in any other environm ents may result in a shortene d
working life, for example where there is prolonged
periods of use.

Switch o the mains be fore commencing installati on
and remove the appro priate circuit fuse or lock o
MCB.

This unit is suitab le for outdoor use.

This produc t is designed for permanent co nnection
to xed wiring: this m ust be a suitable circuit
(protected w ith the appropriate MCB or fuse).

This produc t is suitable for installatio n on surfaces
with normal ammability e.g. wood, plasterboard
and masonry.

Before makin g xing hole(s), check that there are no
obstructi ons hidden beneath the mount ing surface
such as pipes or cab les.

Make sure that the xi ngs are strong enough to
support the co nsiderable weight of the t ting and
hold it rigidly.

The lamp must be p ositioned so that there is at lea st

0.5m (500mm) bet ween the bulb and any illuminated
surface.

When choosing th e location for your new tt ing,
ensure that the xin gs will be anchored in a solid
surface e.g. con crete, brick or a joist—do not  x
directly onto panelling, cladding, plasterboard etc.

Do not attach to su rfaces which are damp, fresh ly
painted or other wise electricall y conductive (e.g.
metallic sur faces).

When making con nections ensure that the ter minals
are tightened se curely and that no strands of wi re
protrude. Chec k that the terminals are tightene d
onto the bared cond uctors and not onto any
insulation.

This tting is d ouble insulated; do not connec t any
part to eart h.

This produc t is not intended to be used by childr en
and persons wi th sensory, physical and/or ment al
impairments th at would prevent them from using i t
saf ely.

You are advised at ever y stage of your installatio n to
double-check any electrical connections you have
made. After you h ave completed your installatio n
there are elec trical tests that should b e carried out,
these tests are sp ecied in the current IEE wir ing and
building regulations.

IMPORTANT:

PERLED20 PHOTOCELL - Do not inst all under

eaves or in a location o f frequent shadow that will
prevent the light fro m switching o when require d.
Do not install ne ar other sources of bright light tha t
will prevent the light f rom switching on when the
ambient light leve l falls.

DO NOT CAR RY OR LIFT THE PERI METER
LIGHT BY THE MAINS SUPPLY CABLE!

PLEASE NOTE:

THE PHOTOCELL OPE RATES IN NATURAL
LIGHT, THIS SH OULD NOT BE TESTED
USING ARTIFICIAL LIGHT (LE D, ENERGY
SAVING LAM P ETC).

LAMP REPLACEMENT:

INSTALLATION:

1. Choose the location f or your new light tting
giving considerations to the points listed opposite
and take account of mou nting height for area to
be lit.

2. Isolate mains.

3. Mark xing poin ts by using the xing bracket as a
template and drill  xing holes, according to your
chosen xing method.

4. Make connecti ons in the IP65 rated connectio n
box, ensuring th e Live, and Neutral polariti es are
observed.

5A) Connect blue wir e to Neutral terminal marked

(N).

5B) Connect brown wi re to live terminal marked (L)

(light to stay on contin uously) or connect brown
cable to terminal m arked LI (if you want photocell
operation).

6. Restore power a nd test the luminaire.

Connection Box

Connect BLUE wire to (N)

N

STEP 5A

Connection Box

Connect BROWN wire to (L)

L

STEP 5B

CONTINUOUS LIGHT OPTION

Connection Box

Connect BROWN wire to (LI)

LI

STEP 5B

PHOTOCELL OPTION

Based On Maintenance Factor 0.8

PERLED20 Illuminance Area

0

0m

5m

3m

4.5m

8.5m

7.5 10 15 20 30

Illuminance (Lux)

EXAMPLE FOR MEDIUM TRAFFIC PARKING AREAS

>=10 LUX AVERAGE

Oce buildings • Plants • Sports & Multipurpose Building Complexes

3m

high

4.25m

4.25m

The light source cont ained in this luminaire
shall only be rep laced by the manufacturer,
service age nt or a similar qualied pers on.

CAUTION, RISK OF ELECTRIC SHOCK.

The light source is designed to last the lifetime of the
luminaire.