Eterna FLOOD50, FLOOD120, FLOOD200, FLOOD80 Installation Instructions Manual

These instructions are provided as a guideline to assist you.

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION

AND RETAIN FOR FUTURE REFERENCE

Model:

FLOOD50 / FLOOD80 / FLOOD120 / FLOOD200

50W / 80W / 120W / 200W LED Floodlight

INSTALLATION INSTRUCTIONS

A guide for qualied electricians

Email: [e-mail] / [e-mail]

Visit our website: www.eterna-lighting.co.uk

Made in ChinaIssue 1117

1m

874/2012

MODELNO.

FLOOD RANGE

FLOOD50

FLOOD80

FLOOD120

Pack Contents:

1 x tting
complete with 3
core x 0.8m cable

FLOOD200

LAMP SPECIFICATIONS: 50W 80W 120W 200W

Luminaire lumens (with
diuser)

3500 lm 6500 lm 8600 lm 17000 lm

Lumens from chip (no
diuser)

3800 lm 6800 lm 9500 lm 18200 lm

Useful lumens

3260 lm 6100 lm 8100 lm 16500 lm

Rated Wattage 50W 80W 120W 200W

Rated luminous ux 3260 lm 6100 lm 8100 lm 16500 lm

Nominal life time of the lamp 25,000 hrs 25,000 hrs 25,000 hrs 25,000 hrs

Colour temperature 4000K 4000K 4000K 4000K

Number of switching cycles
before premature lamp
failure

≥12,500 ≥12,500 ≥12,500 ≥12,500

Warm-up time up to 60 % of
the full light output

Instant full light Instant full light Instant full light Instant full light

Dimmable No No No No

Nominal beam angle 120° 120° 120° 120°

Rated power 50W 80W 120W 200W

Rated lamp lifetime 25,000 hrs 25,000 hrs 25,000 hrs 25,000 hrs

Lamp power factor >0.9 >0.9 >0.9 >0.9

Lumen maintenance factor at
end of nominal life

<70% 70% 70% 70%

Starting time <0.5s <0.5s <0.5s <0.5s

Colour rendering >70 >70 >70 >70

Colour consistency

Within 6 step

Macadam ellipse

Within 6 step

Macadam ellipse

Within a six step

Macadam ellipse

Within a six step

Macadam ellipse

Rated peak intensity 1170cd 1971cd 2520cd 5033cd

Rated beam angle 120° 120° 120° 120°

Voltage / Frequency 240V~50Hz 240V~50Hz 240V~50Hz 240V~50Hz

Not suitable for accent lighting

READ THIS FIRST:

Check the pack and m ake sure you have all of the
parts liste d on the front of this bookle t. If not,
contact the outlet where you bought this product.

This light tting must be installed by a competent
person in accordance with the current building
and IEE wiring regulations.

As the buyer, install er and/or user of this product it
is your own responsi bility to ensure that this tt ing
is t for the purpo se for which you have intended
it. Eterna Lightin g cannot accept any liability fo r
loss, damage or premature failure resulting from
inappropriate use.

This product is designed and constructed according
to the principles of the appropriate British Standard.

Switch o the mains be fore commencing installati on
and remove the appro priate circuit fuse or lock o
MCB.

This unit is suitab le for outdoor use.

This produc t is suitable for installatio n on surfaces
with normal ammability e.g. wood, plasterboard
and masonry. It is not s uitable for use on highly
ammable sur faces (e.g. polystyren e, textiles).

Before makin g xing hole(s), check that there are no
obstructi ons hidden beneath the mount ing surface
such as pipes or cab les.

Make sure that the xi ngs are strong enough to
support the co nsiderable weight of the t ting and
hold it rigidly.

The lamp must be p ositioned so that there is at lea st
1m between the bulb an d any illuminated surface.
Floodlights sh ould be positioned well away f rom
ammable materials.

Do not attach to su rfaces which are damp, fresh ly
painted or otherwise electrically conductive
(e.g. metallic sur faces).

This produc t is designed for permanent co nnection
to xed wiring: this m ust be a suitable circuit
(protected w ith the appropriate MCB or fuse).

When making con nections ensure that the ter minals
are tightened se curely and that no strands of wi re
protrude. Chec k that the terminals are tightene d
onto the bared cond uctors and not onto any
insulation.

This produc t must be connected to an ear th
termination.

This produc t is not intended to be used by childr en
and persons wi th sensory, physical and/or ment al
impairments th at would prevent them from using i t
saf ely.

IMPORTANT - if the ex ternal exible cable of t his
luminaire is damag ed it should be exclusively
replaced by a quali ed engineer.

You are advised at ever y stage of your installatio n to
double-check any electrical connections you have
made. After you h ave completed your installatio n
there are elec trical tests that should b e carried out,
these tests are sp ecied in the current IEE wir ing and
building regul ations. If in doubt, consult a qual ied
electrician.

Do not carr y or lift the ood light by the mains
supply cable.

LAMP REPLACEMENT:

CLEANING:

Clean this light t ting only with a soft dr y cloth.

Do not use any chemic al or abrasive cleaners.

INSTALLATION:

1. Choose the location f or your new light tting
giving considerations to the points listed opposite.

2. Isolate mains.

3. Using the bracket, m ark xing points and drill
xing holes, according to your chosen xing
method (xings n ot included). See diagram
opposite for marking measurements.

4. Terminate loose ends of wi re to an appropriate IP
rated junctio n box or similar, ensuring the Live,
Earth and Neutral polarities are observed.

Live - Brown / Red
Neutral - Blue / Bl ack
Earth - Yellow / Green

5. Restore power and te st the luminaire.

6. Adjust oodli ght head towards the area to be
illuminated and secure in place.

EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:

Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Direc tive” eective August 20 05—UK
WEEE Regulation s eective 2nd January 20 07).
Environment Agenc y Registered Producer : WEE/
GA0248Q Z.

WHEN YOUR PR ODUCT COMES TO TH E END OF
ITS LIFE OR YO U CHOOSE TO REPLACE I T, PLEA SE
RECYCLE IT W HERE FACILITIES E XIST  DO NOT
DISPOSE WITH HOUSEHOLD WASTE.

IF YOU EXPERIENCE PROBLEMS:

If you believe your p roduct is defective, p lease return
it to the place where yo u bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, bu t may not be able to give specic
instructions regarding individual installations.

102mm

103mm

FIXING S LOTS ON BRACKET

FIXING S LOTS ON BRACKET

FLOOD50

FLOOD80

88mm

310m m

FIXING S LOTS ON BRACKET

FLOOD120

FLOOD200

The light source cont ained in this luminaire
shall only be rep laced by the manufacturer,
service age nt or a similar qualied pers on.

CAUTION, RISK OF ELECTRIC SHOCK.

The light source is designed to last the lifetime of the
luminaire.

FIXING S LOTS ON BRACKET